Style and timing of tectonic deformation across the Bou Arada-El Fahs troughs system,Northeast Tunisia: integration in the structural evolution of Atlas fold and thrust belt

The Bou Arada-El Fahs troughs system is a particularly E-W trending collapsed structure with the manifestation of normal-to-strike-slip faults. A combined multi-source and multi-scalar structural and geophysical investigation provides important insights on the geometry and the kinematics evolution of trough systems in the Atlas of Tunisia. New data, as well as a reappraisal of available data show that the studied troughs system is established during three main successive events: the Oligocene-Miocene, the Tortonian, and the Plio-Quaternary events. The goal of this paper is to present the structural evolution of the study area, on a pre-structured substratum. The structural evolution progressed from an extensional event, manifested by the formation of grabens, passing by an episode of reactivation of faults related troughs in strike-slip motion during the Atlas compression accompanied by an en-échelon folding in foot wall and hanging wall. These results acquired and presented in the following order: We will initially present the geological context by integrating and correlating the lithostratigraphic data. We continue by examining the geometry and kinematics of structure-related troughs via the detailed geological mapping, the interpretation of available 2D seismic data, and the interpretation of processed fault slip data. This integrated geological and geophysical study allows a better understanding of the BETS, and makes it possible to propose a new geometrical and kinetic model of the establishment of trough structure in the Tunisian Atlas.     

Hydrochemical characterization and geospatial analysis of groundwater quality in Cap Bon region,northeastern Tunisia

The hydrogeochemical characteristics of shallow groundwater in the Grombalia region, northeastern Tunisia, were investigated to evaluate suitability for irrigation and other uses and to determine the main processes that control its chemical composition. A total of 21 groundwater samples were collected from existing wells in January–February 2015 and were analyzed for the major cations and anions concentrations. Conductivity, pH, T°, O₂ and salinity were also measured. Interrelationships between chemical parameters were determined by using the scatter matrix method. The suitability of groundwater for irrigation and other uses was assessed by determining the sodium adsorption ratio, soluble-sodium percentage, total dissolved solids, total hardness, Kelly’s index and permeability index values of water samples. The spatial distribution of key parameters was assessed using a GIS-based spatial gridding technique. This analysis indicated that the chemical composition of groundwater in the study area is of Cl–SO₄–Na–Ca mixed facies with concentrations of many chemical constituents exceeding known guideline values for irrigation. The salinity of groundwater is controlled by most dominant cation and anion (Na–Cl). A correlation analysis shows that Na⁺ is the dominant cation and that reverse ion exchange is a dominant process that controls the hydrogeochemical evolution of groundwater in the area. Geospatial mapping of hydrochemical parameters and indices analyzed with the USSL and Wilcox diagrams show distinctive areas of irrigation suitability. In contrast, 76.2% of samples fall in the highly doubtful to unsuitable category and indicate that the central and north-eastern parts of the study area are unsuitable for irrigation due to a high salinity and alkalinity.     

Biostratigraphy and seismic data analysis to detect the sequence stratigraphic depositional environment of the Miocene succession: Gulf of Suez (Egypt)

This work comprises a study of the sequence stratigraphy, seismic-facies analysis, biostratigraphy and depositional environments of the northern part of the Gulf of Suez, Egypt, using a set of 24 3D seismic profiles, composite logs and sonic logs from ten wells. The syn-rift formations in the studied ten wells are described lithologically and interpreted based on investigating two seismic profiles. Biostratigraphically, the Miocene fossils are identified to correlate the five planktonic foraminiferal biozones in the examined boreholes (RB-A1, RB-B1, RB-B3, EE85-2 and RB-C1). The sequence stratigraphic analysis suggests that the Miocene succession can be subdivided into two major third order depositional sequences (S1 and S2) separated by the three major sequence boundaries (DSB1, DSB2 and DSB3).     

Modelling wind-erosion risk in the Laghouat region (Algeria) using geomatics approach

Wind-erosion risk is a challenge that threatens land development in dry-land regions. Soil analysis, remote sensing, climatic, vegetal cover and topographic data were used in a geographic information system (GIS), using multi-criteria analysis (MCA) to map wind-erosion risk (R_we) in Laghouat, Algeria. The approach was based on modelling the risk and incorporating topographic and climatic effects. The maps were coded according to their sensitivity to wind erosion and to their socio-economic potential, from low to very high. By overlapping the effects of these layers, qualitative maps were drawn to reflect the potential sensitivity to wind erosion per unit area. The results indicated that severe wind erosion affects mainly all the southern parts and some parts in the north of Laghouat, where wind-erosion hazard (H_we) is very high in 43% of the total area, and which was affected mainly by natural parameters such as soil, topography and wind. The results also identified features vulnerable to R_we. The product of the hazard and the stake maps indicated the potential risk areas that need preventive measures; this was more than half of the study area, making it essential to undertake environmental management and land-use planning.     

Flow dynamics at the origin of thin clayey sand lacustrine turbidites: Examples from Lake Hazar,Turkey

Turbidity currents and their deposits can be investigated using several methods, i.e. direct monitoring, physical and numerical modelling, sediment cores and outcrops. The present study focused on thin clayey sand turbidites found in Lake Hazar (Turkey) occurring in eleven clusters of closely spaced thin beds. Depositional processes and sources for three of those eleven clusters are studied at three coring sites. Bathymetrical data and seismic reflection profiles are used to understand the specific geomorphology of each site. X‐ray, thin sections and CT scan imagery combined with grain‐size, geochemical and mineralogical measurements on the cores allow characterization of the turbidites. Turbidites included in each cluster were produced by remobilization of surficial slope sediment, a process identified in very few studies worldwide. Three types of turbidites are distinguished and compared with deposits obtained in flume studies published in the literature. Type 1 is made of an ungraded clayey silt layer issued from a cohesive flow. Type 2 is composed of a partially graded clayey sand layer overlain by a mud cap, attributed to a transitional flow. Type 3 corresponds to a graded clayey sand layer overlain by a mud cap issued from a turbulence‐dominated flow. While the published experimental studies show that turbulence is damped by cohesion for low clay content, type 3 deposits of this study show evidence for a turbulence‐dominated mechanism despite their high clay content. This divergence may in part relate to input variables, such as water chemistry and clay mineralogy, that are not routinely considered in experimental studies. Furthermore, the large sedimentological variety observed in the turbidites from one coring site to another is related to the evolution of a sediment flow within a field‐scale basin made of a complex physiography that cannot be tackled by flume experiments.     

Morphotectonic controls of groundwater flow regime and relating environmental impacts in Northwest Sinai,Egypt

The frequent appearance of some hydro-environmental hazard features, such as waterlogging and soil salinization along the susceptible zones at Northwest Sinai area (NWSA), has put serious challenges and obstacles for a correct and efficient land use planning of this region, for several decades. Although previous studies have shown that the whole region of Northern Sinai is greatly affected by the tectonic movements associated with the Syrian Arc folding system (SAS), NWSA is barren of any obvious surficial structures. The current work aims to investigate the effect of subsurface tectonic features on the hydrogeologic regime of NWSA.Hydrogeological and remote sensing data were integrated with ground geophysical gravity and magnetic measurements, using the geographic information system. Data integration asserts the role played by buried tectonic features not only in governing the landforms of the upper water-bearing quaternary formations but also in controlling their flow regime.Two major subsurface structures were identified through interpreting the geophysical measurements. A buried dome-like structure, dominating the central part of the mapped area, coincides with the radial flow pattern observed on the water table map. At the southwestern corner of the study area, an elevated groundwater level, caused by continuous groundwater accumulation at the discharge boundary, is superimposing a subsurface block-faulted depression. The waterlogging features (saturation of the soil by groundwater and inundation of local depressions due to rising of water table) dominating the discharge lowlands of NWSA support the conclusion that a buried block-faulted structure exerts a strong influence on the thickness and groundwater flow regime of the shallow quaternary aquifer.     

Assessment of proposed approaches for bathymetry calculations using multispectral satellite images in shallow coastal/lake areas: a comparison of five models

Bathymetric information for shallow coastal/lake areas is essential for hydrological engineering applications such as sedimentary processes and coastal studies. Remotely sensed imagery is considered a time-effective, low-cost, and wide-coverage solution for bathymetric measurements. This study assesses the performance of three proposed empirical models for bathymetry calculations in three different areas: Alexandria port, Egypt, as an example of a low-turbidity deep water area with silt-sand bottom cover and a depth range of 10.5 m; the Lake Nubia entrance zone, Sudan, which is a highly turbid, unstable, clay bottom area with water depths to 6 m; and Shiraho, Ishigaki Island, Japan, a coral reef area with varied depths ranging up to 14 m. The proposed models are the ensemble regression tree-fitting algorithm using bagging (BAG), ensemble regression tree-fitting algorithm of least squares boosting (LSB), and support vector regression algorithm (SVR). Data from Landsat 8 and Spot 6 satellite images were used to assess the performance of the proposed models. The three models were used to obtain bathymetric maps using the reflectance of green, red, blue/red, and green/red band ratios. The results were compared with corresponding results yielded by two conventional empirical methods, the neural network (NN) and the Lyzenga generalised linear model (GLM). Compared with echosounder data, BAG, LSB, and SVR results demonstrate higher accuracy ranges from 0.04 to 0.35 m more than Lyzenga GLM. The BAG algorithm, producing the most accurate results, proved to be the preferable algorithm for bathymetry calculation.     

Isotopic,mineralogical, and thermobarometric variations of Al-Wahbah crater (Maklaa Tameya), Kishb area,Saudi Arabia

The Cenozoic volcanism of western Saudi Arabia extends from southern Yemen to Jordan northward. They cover an area of nearly 180,000 km². The rocks are dominated by alkali olivine basalts and olivine basalts. Al-Wahbah crater, a part of Harrat Kishb, represents a model occurrence to study the gneisses of these rocks. New mineral chemistry and isotopic data are presented. It aims to follow the isotopic, mineralogical, and thermobarometry variations among these volcanics. Amphiboles of the studied volcanics belong to the monoclinic calcic group. The chemistry of the amphibole crystals shows two ranges of pressure. They are 3.6–5.6 and 0.38–0.78 kbar. The Al_iv values of the amphiboles are in the range of 1.202 and 1.407, indicating corresponding temperature condition of 820–920 and 620–720 °C, respectively. The feldspar of the studied samples has the composition of plagioclase, though some grains have sanidine composition. They are formed in temperature range of 975 and 400 °C. The coexisting amphiboles and plagioclases indicate two sets of pressure and temperature. They are 540–575 °C (3.5–4 kbar) and 510–525 °C (~2 kbar), respectively. Rb–Sr isochron of the whole rock yields an age of 0.867 ± 0.160 Ma with initial Sr⁸⁷/Sr⁸⁶ of 0.702 ± 0.00086. The low initial ratio of Sr⁸⁷/Sr⁸⁶ together with positive values of εNd today implies that the studied volcanics have mantle source. Meanwhile, the present isotopic data suggest extraction of juvenile magma from asthenosphere source. The present study shows that the Al-Wahbah crater rocks belong to Cenozoic basalts and indicate EM-I-like signature.     

Changing roles controlling alternating marine and aeolian deposition and formation of Quaternary sequences in Hergla coastal escarpment (north-eastern Tunisia)

This work is meant to set a new stratigraphic framework of the Quaternary Hergla Sea Cliff deposits in eastern Tunisia including vital precisions concerning depositional environments and climatic conditions. Infrared stimulated luminescence (IRSL) data previously obtained at the Hergla region show that the Khniss unit is Tyrrhenian in age (MIS 5.5), while the Rejiche unit dates to the MIS 5.3/5.1 undifferentiated by the IRSL for the marine deposits and attributed to the MIS 4 for the dunes continental deposits. The sedimentological studies showed that the whole of the marine units of the Upper Pleistocene of Hergla were deposited in a shallow marine environment and also highlighted at least two major transgressive cycles interrupted by drops of the sea level leading to emergence. The first cycle corresponds to the Khniss unit deposit. The second cycle corresponds to the transgression of the Rejiche unit. The end of the MIS 5.5 is marked by a lagoonal sedimentation with a regressive tendency followed by an emergence period materialized by the presence of a paleosol. During the MIS 5.3/5.1, the marine deposits of the Rejiche unit correspond to infratidal carbonate sediments subjected to storms currents. They are characterized by the reworking of lithoclasts, due to the action of the storm currents. Eventually, the study of cements in the continental deposits of the Rejiche unit indicates a late evolution in a continental vadose environment, subjected to the action of meteoric waters. In terms of climatic conditions, the MIS 5.5 was hotter and wetter than the subsequent MIS 5.3/5.1.