Longitudinal vibration of non-homogeneous earth dams

Two-dimensional analytical elastic models are developed for evaluating dynamic characteristics, namely natural frequencies and modes of vibration of a wide class of earth dams in a direction parallel to the dam axis. In these models the non-homogeneity of the dam materials is taken into account by assuming a specific variation of the stiffness properties along the depth (due to the continuous increase in confining pressure). In addition, both shear and normal (axial) deformations are considered. Cases having constant elastic moduli, linear and trapezoidal variations of elastic moduli, and elastic moduli increasing as the one-half, one-third, two fifths, and a general (l/m)th powers of the depth are studied. Dynamic properties of three real earth dams in a seismically active area (Southern California) estimated from their earthquake records (input ground motion and crest response in the longitudinal direction) as well as results from full-scale dynamic tests on one of these dams (including ambient and forced vibration tests) are compared with those from the suggested models. It was found that the models in which the shear modulus and the modulus of elasticity of the dam material vary along the depth are the most appropriate representations for predicting the dynamic characteristics. The agreement between the experimental and earthquake data and the theoretical results from some of the models is reasonably good.     

Monitoring disasters with a constellation of satellites – type examples from the International Charter ‘Space and Major Disasters’

In the case of a major disaster, information derived from satellite observation is not only highly useful, it may at times be indispensable because of the damage caused by the disaster to ground infrastructure. The International Charter ‘Space and Major Disasters’ (‘the Charter’) has been one of the primary sources of satellite data for the past 11 years to cover events like floods, fires, tsunamis, ocean storms, earthquakes, volcanic eruptions and oil spills. With the growing membership of the Charter, an increasingly large number of sensors are now available, which can be planned with the required temporal frequency and spectral range to cover a disaster event. Some of the type Charter activation cases are reported in this article to demonstrate the innovative use of multi-satellite imagery for disaster response.     

Evaporitic sedimentation and microbial mats in a salina system (Port Fouad,Egypt)

A salina system along the Mediterranean coast of Egypt was investigated. Five sedimentary facies are described. For each facies, the evaporitic sedimentation and the biological conditions are considered. Comparisons of evaporite precipitates in the salina with ancient deposits are made.     

The use of WorldView-2 satellite imagery to model urban drainage system with low impact development (LID) Techniques

Within a wide range of best management practices for stormwater management in urban areas, there has been an increasing interest in source control measures. Source controls such as low-impact development (LID) techniques are potentially attractive as retrofit options for older developed areas that lack available land to implement conventional measures such as stormwater management ponds. Hence, distributed urban drainage models requiring detailed representation of developed drainage areas should be developed to accurately estimate the benefits that LIDs may provide. This study (1) presents a two-stage classification process on a high-resolution WorldView-2 image, and (2) demonstrates how to use the extracted land cover information in the subsequent hydrologic modelling and assessment of different LIDs’ performance. The proposed two-stage classification method achieved an overall accuracy of 80.6%, whereas a traditional pixel-based achieved 68.4% in classifying the same urban area into six land cover classes. From the classification results, the hydrologic properties of micro-subcatchments were imported in the United States Environmental Protection Agency Storm Water Management Model to assess the performance of LIDs. A reduction of run-off volume 18.2% and 37.1% was found with the implementation of porous pavement and bioretention, respectively, in a typical low-rise residential area located in the city of San Clemente, California, US. The study demonstrates the use of high-resolution remote sensing image to aid in evaluating LID retrofit options, and thus benefits in situations where detailed drainage area information is not available.     

An efficient application of fusion approach for hot spot detection with MODIS and PALSAR-1 data

Hot spot detection with satellite images, especially with synthetic aperture radar (SAR) images is still a challenging task. Several researchers have used TM/optical data for identification of hot spot but the use of SAR data is very limited for this type of application. The fusion of SAR data with TM/optical data may add additional information which in turn will lead for enhancement of detection capability of the hot spot. Therefore, this study explores the possibility of fusion of Moderate Resolution Imaging Spectroradiometer (MODIS) and Phased Array L-band Synthetic Aperture Radar (PALSAR) satellite images for the hot spot detection. Image fusion is emerging as a powerful tool where information of various sensors can be used for obtaining better results. For this purpose, vegetation greenness and roughness information which is obtained from MODIS and PALSAR satellite images, respectively, are used for fusion, and then, a contextual-based thresholding algorithm is applied to the fused image for hot spot detection. The proposed approach comprises of two steps: (1) application of genetic algorithm-based scheme for image fusion of MODIS and PALSAR satellite images, and (2) classification of the fused image as either hot spot or non-hot spot pixels by employing a contextual thresholding technique. The algorithm is tested over the Jharia Coal Field region of India, where hot spot is one of the major problems and it is observed that the proposed thresholding technique classifies the each pixel of the fused image into two categories: hot spot and non-hot spot and the proposed approach detects the hot spot with better accuracy and less false alarm.     

Environmental change detection in the central part of Iraq using remote sensing data and GIS

This study aims to assess the potential of several ancillary input data for the improvement of unsupervised land cover change detection in arid environments. The study area is located in Central Iraq where desertification has been observed. We develop a new scheme based on known robust indices. We employ Landsat (multispectral scanner, thematic mapper, and enhanced thematic mapper) satellite data acquired in 1976, 1990, and 2002. We use the Normalized Deferential Vegetation Index, Normalized Differential Water Index (NDWI), Salinity Index (SI), and Eolian Mapping Index. Two new equations were applied for the SI and the NDWI indices. Validation was performed using ground truth data collected in 16 days. We show that such an approach allows a robust and low-cost alternative for preliminary and large-scale assessments. This study shows that desertification has increased in the study area since 1990.     

Structural Setting and Kinematic Analysis of the Halaban Region,Eastern Arabian Shield,Saudi Arabia

The vorticity analysis technique was applied to measure the different lithological units,such as schist,metagranite and metavolcano-sedimentary rocks,which are present in the Halaban region.This work aims to interpret the relationship between the different lithologies and the tectonic setting,in order to elucidate the nature of kinematic analysis in the Halaban region.The kinematic analyses were applied to feldspar porphyroclasts,quartz and hornblende for twentysix samples.The kinematic vorticity number (W_m) for deformed rocks in the study area ranged from～0.6 to 0.9.The direction of the long axes for finite strain data (X axes) revealed a WNW trend with shallow dipping.The direction of the short axes for finite strain data (Z axes) were represented by vertical with associated horizontal foliation.The results of the kinematic vorticity and strain analyses are characterized by simple shear with different degrees of deformation in the Halaban region.Furthermore,our finite strain data shows no significant volume change during deformation.The subhorizontal foliation was synchronized with thrusting and deformation.Furthermore,throughout the overlying nappes,the same attitudes of tectonic contacts are observable,the nappes in the orogens being formed from simple shear deformation.     

Delineating low-arsenic groundwater environments in the Bengal Aquifer System, Bangladesh

Studies within the As-affected Bengal Basin have indicated that low-As groundwater can be found in a variety of geological and geomorphological settings. The hydrogeological environments that host low-As groundwater may be interpreted within a geological framework determined by the Quaternary evolution of the Bengal Aquifer System (BAS). This provides the basis for delineating the position and extent of shallow low-As groundwater, low-As groundwater in oxidised ‘red-bed’ sediments, and deep low-As groundwater. Data available on a national scale allow a preliminary delineation of these low-As groundwater environments across Bangladesh, based on empirical associations of low-As groundwater occurrences with topography, water table elevation, surface sediment lithology, geology and the screen depth of deep wells in low-As zones.     

Influence of Relative Density on Static Soil–Structure Frictional Resistance of Dry and Saturated Sand

Soil–structure frictional resistance is required while designing foundation systems and retaining walls. Although much more attention has been paid in recent years regarding soil–structure interaction for dynamic loading, highly conservative values of the static frictional resistance between soil and structure are used in design. Not much emphasis has been given lately to evaluate static frictional resistance between soil and structure. In this study, a well graded sand, as per USCS classification system, was prepared in the laboratory at different relative densities and moisture contents i.e. dry and saturated, and frictional resistances of those soils were measured. Those soil samples were also sheared against wood, concrete, and steel blocks and corresponding soil–structure frictional resistances were measured. Moreover, similar experiments were performed for saturated and loose poorly graded sand (SP), silty sand (SM) and poorly graded sand with silt (SP–SM). The study result shows that the difference between frictional resistance of soil and skin friction depends on the type of soil, relative density and the moisture content. Interestingly, shear envelopes for soil–soil and soil–structure shearing resistance exhibited curvature. The traditionally adopted soil–structure frictional resistance values adopted by various geotechnical manuals were found to be highly conservative.     

Removal of heavy metal ions from aqueous solutions with multi-walled carbon nanotubes: Kinetic and thermodynamic studies

Multi-walled carbon nanotubes were used successfully for the removal of Copper(II), Lead(II), Cadmium(II), and Zinc(II) from aqueous solution. The results showed that the % adsorption increased by raising the solution temperature due to the endothermic nature of the adsorption process. The kinetics of Cadmium(II), Lead(II), Copper(II), and Zinc(II) adsorption on Multi-walled carbon nanotubes were analyzed using the fraction power function model, Lagergren pseudo-first-order, pseudo-second-order, and Elovich models, and the results showed that the adsorption of heavy metal ions was a pseudo-second-order process, and the adsorption capacity increased with increasing solution temperature. The binding of the metal ions by the carbon nanotubes was evaluated from the adsorption capacities and was found to follow the following order: Copper(II) > Lead(II) > Zinc(II) > Cadmium(II). The thermodynamics parameters were calculated, and the results showed that the values of the free energies were negative for all metals ions, which indicated the spontaneity of the adsorption process, and this spontaneity increased by raising the solution temperature. The change in entropy values were positives, indicating the increase in randomness due to the physical adsorption of heavy metal ions from the aqueous solution to the carbon nanotubes’ surface. Although the enthalpy values were positive for all metal ions, the free energies were negative, and the adsorption was spontaneous, which indicates that the heavy metal adsorption of Multi-walled carbon nanotubes was an entropy-driving process.