河北南部地区资源、环境、发展初析

河北南部地区山前平原区农业气候条件适于夏玉米的生长 ,黑龙港地区适于棉花的生长。本区水资源匮乏 ,地下水超采严重。浅层地下水超采模数为 8.0 1× 1 0 4 m3/( km2 ·a) ,深层地下水为 2 .5 8× 1 0 4 m3/( km2·a)。全区水资源利用的综合边际效益以廊坊市最高 ( 2 6.68元 /t) ,保定市最低 ( 1 4.85元 /t) ,两者之比为 1 .80。区内地下水降落漏斗与地面沉降等环境地质灾害频繁 ,1 998年浅层地下水漏斗区面积为 0 .5 4× 1 0 4 km2 ,深层地下水为 1 .5 9× 1 0 4 km2。地下水、粮食和蔬菜受到农药残留、过量化肥的污染。本区 2 0 1 0水平年外流域调水将占可供水量的 2 3.9% ,但缺水率仍达 36.2 %。若全区通过发展工程节水 (提高综合节水率 3.2 % )、实施适水种植 (冬小麦播种面积下调 7% ) ,利用水分胁迫处理 (减少一次灌溉 )等节水措施 ,则比 1 999年节水 1 7.2 %。     

西安翠华山山崩地质遗迹资源保护

文论述了西安翠华山山崩地质遗迹资源保护的目的，进行了保护分区，将其分为核心保护区、缓冲区和视域保护区三个区，重点分析了核心保护区的保护现状，并在此基础上提出了相应的保护内容和对策，以实现山崩地质遗迹资源的可持续利用和发展。     

Windows95下帮助系统的开发策略和技巧

Ｈｅｌｐ是能够为用户提供快捷访问的联机帮助信息。现在，研制联机Ｈｅｌｐ帮助系统已成为软件开发过程中必不可少的项目之一。正如其它的任何工程项目一样，Ｈｅｌｐ的制作也需要精心地策划和编排，需要充分发挥Ｈｅｌｐ开发软件的功能，以制作出满足用户要求的高水平的联机帮助系统。笔者就这些方面的内容，论述了开发Ｗｉｎｄｏｗｓ９５下的联机帮助系统的基本原则及使用Ｈｅｌｐ开发工具的一些技巧。     

Pall型摩擦阻尼支撑内力计算方法

从Pall摩擦阻尼器四连杆机构的几何非线性变形特征出发，分析框架位移、支撑刚度、阻尼器摩擦力、阻尼器大小、支撑倾角、支撑屈曲力等对一种改进的Pall摩擦阻尼器-T形芯板摩擦阻尼器支撑的受力特点，拟合出可供设计人员使用的实用计算公式。     

城市防震减灾信息管理系统之研究

城市防震减灾信息系统是“数字福建”的一个组成内容。该文结合福建省城市防震减灾信息系统的建设工作 ,探讨了地理信息系统与防震减灾数值模型的集成方法 ,论述了城市防震减灾信息系统的结构、内容、功能和组织方式 ,分析了地震风险评估、建筑物易损性评价、生命与财产损失估算、救援与救灾管理调度等模型的集成方法 ,设计了城市防震减灾信息系统。     

电法在探测岩溶上的应用

通过对电法中几种常用方法的分析，说明其在岩溶探测中有效，并提出了七种确定岩溶的方法。     

鄂尔多斯盆地中生代晚期以来大地热流的变化及其对生态环境格局和演变的影响

鄂尔多斯盆地的西北部、东北部和南部三个区域现今大地热流平均值分别为56．3、67．3和65．3mW／m^2，对应的生态环境格局也有明显的差异。研究表明，大地热流每增加4～5mW／m^2可使年均地表温度升高约l℃，使最低月均地表温度升高2。C以上。鄂尔多斯盆地东北部的平均大地热流比西北部高出11mW／m^2，东北部年均地表温度可能比西北部高出2～3℃，其最低月均地表温度可能比西北部高出4～6℃。西北部的大地热流平均值已经低于维持地表生态系统延续所需大地热流的临界值(57mW／m^2)，其自然生态系统整体上已经处于脆弱境地；东北部和南部的大地热流均大于57mW／m^2，自然生态系统均尚较稳健。东北部的沙漠化可能是风沙侵入的结果，其生态应该是可以恢复的。整个西北部作为一个整体看，72万年以前大地热流就已衰减到临界值以下，区域生态系统渐趋脆弱，开始整体上向荒漠化演变。     

高速公路软基加固质量的瑞利波检测与小波分析技术

论述了用瑞利波检测高速公路软基加固的一些主要技术问题,应用新兴的小波分析技术,改善和提高检测的质量,并通过福宁高速公路的实际检测结果,说明了其思路和方法的正确性、实用性.     

Study of statistically correcting model CMAQ-MOS for forecasting regional air quality

Based on analysis of the air pollution observational data at 8 observation sites in Beijing including outer suburbs during the period from September 2004 to March 2005, this paper reveals synchronal and in-phase characteristics in the spatial and temporal variation of air pollutants on a city-proper scale at deferent sites; describes seasonal differences of the pollutant emission influence between the heating and non-heating periods, also significantly local differences of the pollutant emission influence between the urban district and outer suburbs, i.e. the spatial and temporal distribution of air pollutant is closely related with that of the pollutant emission intensity. This study shows that due to complexity of the spatial and temporal distribution of pollution emission sources, the new generation Community Multi-scale Air Quality (CMAQ) model developed by the EPA of USA produced forecasts, as other models did, with a systematic error of significantly lower than observations, albeit the model has better capability than previous models had in predicting the spatial distribution and variation tendency of multi-sort pollutants. The reason might be that the CMAQ adopts average amount of pollutant emission inventory, so that the model is difficult to objectively and finely describe the distribution and variation of pollution emission sources intensity on different spatial and temporal scales in the areas, in which the pollution is to be forecast. In order to correct the systematic prediction error resulting from the average pollutant emission inventory in CMAQ, this study proposes a new way of combining dynamics and statistics and establishes a statistically correcting model CMAQ-MOS for forecasts of regional air quality by utilizing the relationship of CMAQ outputs with corresponding observations, and tests the forecast capability. The investigation of experiments presents that CMAQ-MOS reduces the systematic errors of CMAQ because of the uncertainty of pollution emission inventory and improves the forecast level of air quality. Also this work employed a way of combining point and area forecasting, i.e. taking the products of CMAQ for a center site to forecast air pollution for other sites in vicinity with the scheme of model products "reanalysis" and average over the "area".     

Chemical forms of heavy metal contaminants in sediments of Miyun reservoir

The chemical forms, spatial distribution and sources of As, Hg, Cd, Pb and Zn in sediments of the Miyun reservoir were studied. The results of sequential extraction demonstrate that most of As, Pb and Zn were bound to the residual fraction, Hg was associated with the sulfide fraction while Cd was associated with the carbonate fraction and the residual fraction. On the vertical profiles the concentrations of the heavy metals in total and each fractions mostly decreased with increasing depths in sediments, suggesting that the heavy metals input from the upstream watershed increases yearly. Summation of the residual fraction, the sulfide fraction and the carbonate fraction accounts for 60.03%―85.60% of the total heavy metal contents in the sediments, which represent the geochemical background values of the elements and relate closely to soil erosion. Results of the main factor analysis show that most sediments of the reservoir come from the upstream soil erosion, the point source pollution and domestic waste. Moreover, the microbial activities taking place on the sediment-water interface are also one of the major factors to cause the increasing content of the organic matter fraction and the iron-manganese oxide fraction. Environmental change of the reservoir water could make the removability of the heavy metals increase, leading to the increase of their concentrations in pore water in sediments, and imperiling water quality of the reservoir.