Temporal vP/vS variation characteristics in different zones of China’s Capital Circle area before and after Wen’an earthquake

On July 4, 2006, an earthquake of MS5.1 took place in Wen’an, Hebei Province, just at the south center of China’s Capital Circle area digital seismograph network. It is the strongest event recorded ever since the network went into operation in 2002. We processed the vast amounts of phase data yielded by the 107 digital seismic stations between 2002~2007 using Wadati method. In order to improve the precision and stability of shear and compressional wave velocities (vP/vS) calculation, we impose a number of restrictions on the computation environment and condition, e.g., the earthquakes are densely concentrated, selected stations are limited in range, the number of stations in- volved in the computation is larger than 5 and linear fitting features high precision and small error. Under these restrictions, the study shows that vP/vS in and around Wen’an and Tangshan underwent a normal-low-normal proc- ess one year before Wen’an earthquake, vP/vS became obviously low and the low ratio lasted for about one year, meanwhile, little variation of vP/vS was seen in Xingtai, northwest of Beijing, southwest of Beijing, Beijing-Tianjin and Beijing; after the quake, the vP/vS returned normal in Wen’an and Tangshan. Error and stability analysis of the calculated result for vP/vS shows it is convincible that anomaly appeared in and around Wen’an and Tangshan be- fore Wen’an earthquake.     

Data Assimilation (4D-VAR) for Shallow-Water Flow: The Case of the Chicoutimi River

This is a web presentation of the work presented at the 10th Annual Conference of the CFD Society of Canada, “CFD 2002”, at the University of Windsor on June 9-11, 2002. This discussion paper presents the four-dimensional variational data assimilation (4D-VAR) technique as a tool to forecast floods. This discussion will be limited to hydrological forecast. We assume that the weather, here a large rainstorm, had already been forecasted by the meteorological services. In the 4D-VAR technique, we need to minimize, in the sense of Lagrange, a cost function which measures the difference between the forecast and the observations. The physical equations acts as a set of constraints. Here, the model is the shallow-water equations modified to include sediment transport. The minimum was found by using the steepest descent algorithm. This is made possible because the gradient of the cost function can be calculated analytically by using the adjoint equations of the model. To illustrate the 4D-VAR technique, the bypass of a simple theoretical dam as well as the more complex overflowing of the Chicoutimi River at the Chute-Garneau dam (during the 1996 flood) are investigated.     

Unconventional geometric phase gate and multiqubit entanglement for hot ions with a frequency-modulated field

We present an alternative scheme for implementing the unconventional geometric two-qubit phase gate and preparing multiqubit entanglement by using a frequency-modulated laser field to simultaneously illuminate all ions. Selecting the index of modulation yields selective mechanisms for coupling and decoupling between the internal and the external states of the ions. By the selective mechanisms, we obtain the unconventional geometric two-qubit phase gate, multiparticle Greenberger--Horne--Zeilinger states and highly entangled cluster states. Our scheme is insensitive to the thermal motion of the ions.     

Some limitations to measurements of turbulence micro-structure with hot and cold wires

Some of the problems associated with measurements of the small-scale characteristics of dynamic and thermal fully developed turbulence are considered in the context of a study of the tendency-towards-isotropy assumption, Taylor's hypothesis, and internal intermittency, taking advantage of the possibilities offered by the I.M.S.T. Air-Sea Interaction Simulation Tunnel. The paper reviews and discusses the choices of probes and operating parameters for hot-wire anemometers and cold-wire thermometers. A detailed study of the most important characteristic, the spectral signal-to-noise ratio, is presented. Problems specific to measurements with several wires are studied, especially the true resolution of one-point multi-wire probes and the errors due to calibration uncertainties for two-point measurements. Serious doubts are raised on the validity of gradient-probe data.     

深海沉积物分类与命名的参数指标和主成分分析

对于南海中部(118个表层沉积物样,水深82~4 420 m)、东部(106个表层沉积物样,水深700~4 508 m)海域的表层沉积物的粒度资料按小于200 m,200~2 000 m,大于2 000 m水深段对水深、平均粒径、黏土含量进行统计分析,结果表明从陆架到陆坡再到深海,平均粒径和黏土含量随水深增加呈非常有规律的变化;把大于2 000 m水深区域再细分为大于2 500 m,大于3 000 m,大于3 500 m,结果表明平均粒径和黏土含量随水深增加几乎无变化,在南海中部水深大于2 000 m海域平均粒径为3.39~3.54μm,黏土平均含量为54.91%~55.47%;在南海东部水深大于2 000 m海域平均粒径为3.25~3.37μm,黏土平均含量为53.91%~54.56%。研究表明2 000 m水深具有划分深海沉积物的指示意义。南海中部水深大于2 000 m海域黏土平均含量为55.19%,平均粒径为3.39μm;在南海东部水深大于2 000 m海域黏土平均含量为53.91%,平均粒径为3.37μm;在南海中部、东部水深大于2 000 m海域平均粒径均小于4μm,黏土平均含量均大于50%,表明深海沉积物粒度特征是平均粒径小于4μm和黏土平均含量大于50%。黏土含量是非生物组分的代表和划分深海沉积物类型的一个独立参数,钙质生物和硅质生物组分是另外两个独立参数。南海东部海域表层沉积物中55种元素总含量为47.50%,硅、铝、钛、钠、钾、磷、钙、镁、铁、锰十种主元素含量为47.03%,其他45种元素含量为0.47%,虽然沉积物来源复杂、成因不同,但沉积物化学主成分并不复杂,主要由前10种主元素和氧元素组成。沉积物主元素铝、钙、硅分别富集于黏土、钙质沉积、硅质沉积中。通过建立沉积物生源组分与碳酸钙、三氧化二铝、二氧化硅的量化关系,可把碳酸钙、生物二氧化硅作为钙质生物和硅质生物的两个替代参数。     

Structure of the Mount Raymond transverse zone at the southern end of the Wyoming salient, Sevier fold-thrust belt, Utah

The Mount Raymond transverse zone (MRTZ) forms the east-west-trending boundary between the Wyoming salient of the Sevier fold-thrust belt and the Uinta/Cottonwood arch in north-central Utah. Major faults in the zone dip 40° to 45° north. Our structural analysis indicates that the MRTZ contains both contractional and extensional structures. The contractional structures (thrusts and related folds) initially formed as part of a southeast-verging, northeast-trending thrust system. This system gradually curved and merged to the north with the east-verging Absaroka thrust system in the apex of the Wyoming salient. The contrast in trend between structures in the MRTZ and those in the apex of the Wyoming salient reflects the initial curvature of the salient. This curve formed because the stratigraphic sequence involved in thrusting thinned gradually southward, toward the axis of a proto-Uinta arch. The present east-west trend of the MRTZ developed during Laramide uplift of the Unita/Cottonwood arch, an event which tilted the faults into their present position. Cenozoic crustal extension subsequently reactivated segments of the MRTZ. In sum, the evolution of the MRTZ illustrates how post-thrusting processes can affect the map-view geometry of thrust belts to create transverse zones.     

THE STABILITY OF ROCK-VENEERED HILLSLOPES

1　ＩＮＴＲＯＤＵＣＴＩＯＮ　Ｕｎｄｅｒｓｔａｎｄｉｎｇｈｉｌｌｓｌｏｐｅｄｅｖｅｌｏｐｍｅｎｔｒｅｍａｉｎｓａｎｅｌｕｓｉｖｅｇｏａｌｆｏｒｅａｒｔｈｓｃｉｅｎｔｉｓｔｓ.Ｔｈｅｏｒｉｅｓｂａｓｅｄｕｐｏｎｏｂｓｅｒｖａｔｉｏｎ,ｌｏｇｉｃ,ａｎｄｓｐ...     

西天山东塔尔别克金矿区安山岩LA-ICP-MS锆石U-Pb年代学、元素地球化学与岩石成因

东塔尔别克金矿区位于西天山吐拉苏盆地内阿希金矿区南侧,构造上属于伊犁-中天山微板块与准噶尔板块之间的博罗科努早古生代岛弧带西段。东塔尔别克矿区出露有一些安山岩,这些岩石具有典型高镁安山岩特征,如高硅（SiO₂=58.94%~63.85%),具有较高的MgO含量(3.75%~6.59%)和Mg^#(58~69)、高的Cr（94.2×10^-6~241×10^-6）、和Ni（54.5×10^-6~126 ×10^-6）含量,以及低的FeO^T/MgO比值。除了Sr含量略微偏低（235×10^-6~696×10^-6）之外,这些岩石基本显示了埃达克岩的地球化学特征：高的Al₂O₃（15.39%~16.65%）,低Y（9.86×10^-6~14.9×10^-6）含量,以及高的Sr/Y比值(23.8~48.1),无Eu异常,Nb、Ta、Ti亏损等。LA-ICP-MS锆石U-Pb测年结果显示安山岩的年龄为347.2±1.6Ma,为早石炭世。安山岩富集Rb、Th、U 等大离子亲石元素,相对亏损Nb、Ta、Ti等高场强元素,轻重稀土元素分馏明显,具有俯冲带岛弧岩浆的特征。东塔尔别克安山岩可能形成于岛弧环境中,并可能由俯冲的晚古生代北天山洋洋壳以及少量上覆沉积物熔融形成,产生的熔体在上升过程中与地幔橄榄岩发生了相互作用. 熔体-地幔相互作用对区内金矿的形成具有重要意义。     

Stepwise Conditional Transformation for Simulation of Multiple Variables

Most geostatistical studies consider multiple-related variables. These relationships often show complex features such as nonlinearity, heteroscedasticity, and mineralogical or other constraints. These features are not handled by the well-established Gaussian simulation techniques. Earth science variables are rarely Gaussian. Transformation or anamorphosis techniques make each variable univariate Gaussian, but do not enforce bivariate or higher order Gaussianity. The stepwise conditional transformation technique is proposed to transform multiple variables to be univariate Gaussian and multivariate Gaussian with no cross correlation. This makes it remarkably easy to simulate multiple variables with arbitrarily complex relationships: (1) transform the multiple variables, (2) perform independent Gaussian simulation on the transformed variables, and (3) back transform to the original variables. The back transformation enforces reproduction of the original complex features. The methodology and underlying assumptions are explained. Several petroleum and mining examples are used to show features of the transformation and implementation details.