Continental subduction and exhumation of UHP rocks. Structural and geochronological insights from the Dabieshan (East China)

In the Dabieshan, the available models for exhumation of ultrahigh-pressure (UHP) rocks are poorly constrained by structural data. A comprehensive structural and kinematic map and a general cross-section of the Dabieshan including its foreland fold belt and the Northern Dabieshan Domain (Foziling and Luzenguang groups) are presented here. South Dabieshan consists from bottom to top of stacked allochtons: (1) an amphibolite facies gneissic unit, devoid of UHP rocks, interpreted here as the relative autochton; (2) an UHP allochton; (3) a HP rock unit (Susong group) mostly retrogressed into greenschist facies micaschists; (4) a weakly metamorphosed Proterozoic slate and sandstone unit; and (5) an unmetamorphosed Cambrian to Early Triassic sedimentary sequence unconformably covered by Jurassic sandstone. All these units exhibit a polyphase ductile deformation characterized by (i) a NW–SE lineation with a top-to-the-NW shearing, and (ii) a southward refolding of early ductile fabrics.

The Central Dabieshan is a 100-km scale migmatitic dome. Newly discovered eclogite xenoliths in a Cretaceous granitoid dated at 102 Ma by the U–Pb method on titanite demonstrate that migmatization post-dates HP–UHP metamorphism. Ductile faults formed in the subsolidus state coeval to migmatization allow us to characterize the structural pattern of doming. Along the dome margins, migmatite is gneissified under post-solidus conditions and mylonitic–ultramylonitic fabrics commonly develop. The north and west boundaries of the Central Dabieshan metamorphics, i.e. the Xiaotian–Mozitan and Macheng faults, are ductile normal faults formed before Late Jurassic–Early Cretaceous. A Cretaceous reworking is recorded by synkinematic plutons.

North of the Xiaotian–Mozitan fault, the North Dabieshan Domain consists of metasediments and orthogneiss (Foziling and Luzenguang groups) metamorphosed under greenschist to amphibolite facies which never experienced UHP metamorphism. A rare N–S-trending lineation with top-to-the-south shearing is dated at 260 Ma by the ⁴⁰Ar/³⁹Ar method on muscovite. This early structure related to compressional tectonics is reworked by top-to-the-north extensional shear bands.

The main deformation of the Dabieshan consists of a NW–SE-stretching lineation which wraps around the migmatitic dome but exhibits a consistently top-to-the-NW sense of shear. The Central Dabieshan is interpreted as an extensional migmatitic dome bounded by an arched, top-to-the-NW, detachment fault. This structure may account for a part of the UHP rock exhumation. However, the abundance of amphibolite restites in the Central Dabieshan migmatites and the scarcity of eclogites (found only in a few places) argue for an early stage of exhumation and retrogression of UHP rocks before migmatization. This event is coeval to the N–S extensional structures described in the North Dabieshan Domain. Recent radiometric dates suggest that early exhumation and subsequent migmatization occurred in Triassic–Liassic times. The main foliation is deformed by north-verging recumbent folds coeval to the south-verging folds of the South Dabieshan Domain. An intense Cretaceous magmatism accounts for thermal resetting of most of the ⁴⁰Ar/³⁹Ar dates.

A lithosphere-scale exhumation model, involving continental subduction, synconvergence extension with inversion of southward thrusts into NW-ward normal faults and crustal melting is presented.     

APPLICATION OF SOME MECHANICAL CONCEPTS TO STRUCTURAL GEOLOGY

This paper discusses some mechanical concepts that have been largely applied to structural geology and tectonics, and addresses the problems and misunderstandings in use of these mechanical terms. The purpose is to stimulate the interests for structural geologists in using the mechanical principles and methods correctly to solve the geodynamic problems.     

Paleoclimate Changes during the Early Oiigocene in the Hoh Xil Region, Northern Tibetan Plateau

Sedimentological, cyclic-stratigraphic, paleomagnetic, and clay-mineralogical studies on the early Oligocene Yaxicuo Group in the Hoh Xil Basin, the largest Cenozoic sedimentary basin in the hinterland of the Tibetan Plateau, provide abundant information of paleoclimate changes. A 350-m thick section in the middle-lower Yaxicuo Group was analyzed to reveal the climatic history that occurred in the Hoh Xil region during the early Oligocene interval 31.30-30.35 Ma, dated with the paleomagnetic chronostratigraphy. The results indicate that add and cold climate dominated the Hoh Xil region during the early Oligocene in general, being related to the global cooling and drying events that occurred in the earliest Oligocene. Within this period, relatively warm and wet climate accompanied by strong tectonic activity occurred in the 31.05-30.75 Ma interval; while add and cold climate and relatively inactive tectonics occurred in the 31.30-31.05 and 30.75-30.35 Ma intervals. Furthermore, spectral analyses of high-temporal resolution paleoclimatic records show orbital periods including eccentricity, obliquity, and precession. It is concluded that paleoclimate changes during the early Oligocene in the Hoh Xil region were forced by both tectonic activity and orbital periods.     

Cretaceous deformation history of the middle Tan-Lu fault zone in Shandong Province, eastern China

Based on field analysis of fault-slip data from different rock units of the Cretaceous basins along the middle part of the Tan-Lu fault zone (Shandong Province, eastern China), we document polyphase tectonic stress fields and address the changes in sense of motion of the Tan-Lu fault zone during the Cretaceous. The Cretaceous deformation history of the Tan-Lu fault zone can be divided into four main stages. The first stage, during the earliest Cretaceous, was dominated by N-S extension responsible for the formation of the Jiaolai basin. We interpret this extension to be related to dextral strike-slip pull-apart opening guided by the Tan-Lu fault zone. The second stage, during the middle Early Cretaceous, was overwhelmingly rift-dominated and characterized by widespread silicic to intermediate volcanism, normal faulting and basin subsidence. It was at this stage that the Tan-Lu-parallel Yi-Shu Rift was initiated by E-W to WNW-ESE extension. The tectonic regime then changed during the late Early Cretaceous to NW-SE-oriented transpression, causing inversion of the Early Cretaceous rift basin and sinistral slip along the Tan-Lu fault zone. During the Late Cretaceous, dextral activation of the Tan-Lu fault zone resulted in pull-apart opening of the Zhucheng basin, which was subsequently deformed by NE-SW compression. This deformation chronology of the Tan-Lu fault zone and the associated Cretaceous basins allow us to constrain the regional kinematic models as related to subduction along the eastern margin of Asia, or related to collision in the Tibet region.     

日光温室低温寡照灾害指标

文章根据1965～2000年河北省日光温室试验观测资料及各地历年低温寡照对蔬菜的影响程度，确定了低温寡照灾害等级指标，分析了低温寡照的时空分布规律，20世纪80年代以后，河北省各市低温寡照发生次数比60、70年代明显增多；随着纬度增高，河北省低温寡照发生次数明显减少，危害程度明显减轻。     

用非线性多因子动态组合方法作降水概率预报

将逐时段定点降水预报这个以往一般作为非连续量处理的预报问题转化为对一个连续的降水可能函数的预报问题。降水可能函数为一由实况值确定的函数。因为现在模式变化较快，且许多因子和降水可能函数为非线性关系，文章采用一种新的非线性多因子动态组合方法，通过对降水可能函数的预报，作客观分站降水概率预报。     

全球观测应力场的短波分量分析

世界应力图(WSM，World Stress Map)计划的应力指标，目前已累积数据共计10 920个，这些应力指标代表了该地区最大水平主应力的实际观测方向；与此同时，可以假定全球各个板块的绝对运动方向表征了相应各板块的最大水平主应力方向的长波分量．根据应力场的叠加原理，得到由该地区局部构造运动等因素贡献的短波分量的相对大小和方向．将全球划分成2.52.5的基本单元，对每个单元的WSM数据进行加权统计分析，得到其平均应力观测取向，利用HS2-NUVEL1全球绝对板块运动模型计算应力场的长波分量；平均观测应力取向和长波分量取向之间的夹角，决定了相应短波分量相对于观测应力场的大小及其取向的范围，并反映了特定研究地区局部应力场对总应力场的贡献程度．本文的计算结果表明，全球板块的绝大部分地区及各板块的平均效果，长波分量与短波分量对观测应力场的贡献程度相当．对于某些大陆板块内部，局部构造活动对观测应力场的贡献起到重要作用，因而控制着地震的孕育与发生．      

1906年玛纳斯7.7级地震孕震过程的数值模拟研究

根据玛纳斯 7 7级强震区的构造格架 ,利用三维有限元方法对 190 6年玛纳斯 7 7级地震的强震区进行了应力模拟研究。结果表明 ,玛纳斯地震的震源区不仅位于应力集中的部位 ,而且该部位集中的应力还会随着时间的增长而增大。数值模拟较好地再现了 190 6年玛纳斯 7 7级地震震源区的应力积累过程     

做好基层防震减灾宣传工作的几点对策

当前，城市防震减灾宣传工作卓有成效，但在存在诸多困难的广大基层，特别是农村地区的防震减灾宣传工作还有很多不尽人意的地方。作者在借鉴一些基层地震部门工作经验的基础上，结合自身工作实际总结出了做好基层防震减灾宣传工作的几点对策。     

数字遥测地震台网数据管理与服务系统(MASS系统)的系统方案

介绍了基于Internet／Intranet标准的数字遥测地震台网数据管理与服务系统(MASS系统)通过互联网信息发布实现的方案。该方案采用Windows2000server和ⅡS5．0平台，利用ASP技术和脚本语言JavaScript，VbScript及HTML技术，响应浏览器端的动态请求，实现诸如数据管理、数据服务和在线评比等功能，并根据用户请求完成波形数据和相应处理软件的下载。