基于可移动角点的航空和地面LiDAR数据配准

针对航空和地面LiDAR数据配准中点云数据的共轭特征较少且精度差异较大的问题,提出了一种基于可移动角点的航空和地面LiDAR数据配准方法:从航空和地面LiDAR数据中分别提取相应的建筑物角点,采用6参数模型对角点进行初始配准;以地面角点为参照,利用迭代移动方法对误差较大的航空角点进行修正;最后根据移动后的航空和地面角点计算获得点云配准关系。实验结果表明,该文方法可取得较好的点云配准效果,角点修正后能有效提升点云配准精度,适合于含有角点特征的航空和地面LiDAR数据配准。     

黑龙江饶河枕状玄武岩地质、地球化学特征及其构造属性

为了确定饶河玄武岩的构造属性,在野外地质观察的基础上,对玄武岩进行岩石学研究和地球化学分析。玄武岩具有典型的枕状构造、淬冷边、中空骸晶和鬣刺结构等特征,反映其形成于海底喷发环境。化学分析样品具有高TiO_2、MgO和低Al_2O_3、CaO、P_2O_5、K_2O等特征,富集大离子亲石元素(Rb、Sr和Ba),微量元素蛛网图呈向上隆起形态,稀土元素配分曲线为右倾型(∑LREE/∑HREE为5.8~6.5),无δEu异常(0.92~0.97),表明样品具有洋岛玄武岩特征。主量和微量元素构造环境判别图指示了样品形成于洋岛或板内环境。样品与亚速尔型和夏威夷型洋岛玄武岩地球化学特征对比,表现出明显的夏威夷型洋岛玄武岩特征。岩石源区分析揭示出岩浆具有地幔热柱起源,并有先期交代地幔熔体的混入,岩浆源区还受壳幔循环的影响。研究表明,饶河枕状玄武岩为夏威夷型洋岛玄武岩,形成于洋壳消减阶段的洋中脊轴外板内喷发环境,为饶河地区存在成熟的洋盆提供直接证据。结合区域研究成果,认为饶河地区经历了古太平洋板块的扩张、洋中脊轴外板内地幔柱上涌、洋壳俯冲消减以及向佳木斯地块仰冲增生的构造演化过程。     

敦密断裂带白垩纪两期重要的变形事件

本文报道了敦密断裂带糜棱岩中黑云母~(40)Ar/~(39)Ar定年结果和大规模走滑-逆冲断裂的几何学、运动学特征及其形成时代,以便揭示断裂带两期变形事件的构造属性。黑龙江省密山市花岗质糜棱岩中黑云母~(40)Ar/~(39)Ar加权平均年龄为132.2±1.2Ma,它是敦密断裂带经历伸展事件的冷却年龄,也是东北亚大陆边缘在早白垩世Hauterivian期-Albian期发生强烈区域伸展作用的产物。密山市至辽宁省清原县系列大型走滑-逆冲断层和断层相关褶皱揭示出在晚白垩世晚期-末期发生右旋走滑-逆冲事件,该事件规模大,影响范围广,导致整个断裂带遭受到强烈改造,形成对冲式断裂系统。将研究区走滑-逆冲断裂与山东省郯庐断裂带中段挤压构造对比,认为郯庐断裂带北段和中段在晚白垩世末期都发生了强烈的走滑-逆冲事件,它们具有相同的构造特征和构造属性。     

一种底座式ADCP流量自动监测探头支撑装置的研制与应用

在流量自动监测系统中,底座式ADCP设备探头位于河底,维修极为不便。该研制装置采用304不锈钢支架配合滑轮、钢索、绞盘等手摇传动系统,将底座式ADCP设备探头从河底传送到水上岸边检修台,实现对设备探头的维护、检修、更换、安装、调试等操作,再通过该装置将底座式ADCP设备探头传送到河底原位,经十里长街等站实际应用,运行稳定可靠,运用极为方便;该装置防磁、防锈、防腐性能良好,为底座式ADCP探头提供一个很好的工作环境,且结构简单,运输方便,可作为中小河流永久流量自动监测站装置使用。     

青鱼(Mylopharyngodon piceus)新发病病原类志贺邻单胞菌(Plesiomonas shigelloides)的分离鉴定

为研究青鱼暴发性死亡原因,从病症典型青鱼(Mylopharyngodon piceus)肌肉、肝脏和肾脏处进行细菌接种,分离获得一株细菌(HZ2015),对其进行了形态观察、生化特性检测和16S r RNA序列分析,通过动物回归实验、毒力检测和药敏试验了解其对青鱼的致病性、毒力及药物敏感性。所得菌株为类志贺邻单胞菌(Plesiomonas shigelloides),动物回归实验能复制出类似症状,且能从体内再次分离到该菌株;分离株对小鼠的半数致死量(LD50)为106.6 CFU;对头孢呋辛、头孢哌酮、庆大霉素、卡那霉素、复达欣高度敏感。研究表明,菌株HZ2015为青鱼体表溃烂病病原,本研究系类志贺邻单胞菌致青鱼体表溃烂病的首次报道。     

A Method for Automatically Selecting Aids to Navigation Based on their Spatial Influence Domains

To address the limitations of manually selecting aids to navigation (AtNs) on charts, a method for automatically selecting AtNs based on their spatial influence domains (SIDs) is proposed. First, the associations between the spatial attributes of an AtN are analyzed. Second, an SID of the AtN is defined, and a model of the SID is constructed based on the associations between the spatial attributes. Third, the importance of the location of the AtN is weighted based on the SID model. Fourth, an algorithm to automatically select AtNs based on the maximum coverage of the SIDS of preselected AtNs is developed. Finally, several AtNs are selected automatically using the algorithm. The experimental results demonstrate that (1) the proposed method can automatically select AtNs and the results comply with the requirements; (2) the automatic selection can eliminate the human-induced errors or the inconsistent results of manual selections from different operators; and (3) the efficiency of the proposed method is higher than that of current manual methods.     

南海西南部海盆附近中尺度涡及其水文特征

根据"东方红2"于2011年9月在南海西南部11°N~15°N、111°E~114°E海域测得的CTD资料及据此的地转流计算结果,结合南海的海流数值计算结果的对比分析,得出南海西南部海盆附近水域中尺度涡的基本分布规律及其水文特征:(1)以12°N~13°N附近宽约100km的条带作为分界,其北部是气旋式运动,南部是反气旋式运动。(2)气旋涡中心产生上升流,底层水上升,中心密度大。表层表现为低温高盐高密特征;200m层表现为低温低盐高密特征;1 000m层则表现为低温高盐高密特征。(3)在反气旋涡中心产生下降流,海水密度小。表层表现为高温低盐低密特征;200m层表现为高温高盐低密特征;1 000m层则表现为高温低盐低密特征。(4)在8~9月,上述北气旋、南反气旋的分布流态基本不变;(5)季风的影响是因素之一,而地形影响更是调查区域双涡旋流动结构的重要动力机制。     

Numerical Investigation of Submarine Hydrodynamics and Flow Field in Steady Turn

This paper presents numerical simulations of viscous flow past a submarine model in steady turn by solving the Reynolds-Averaged Navier?Stokes Equations (RANSE) for incompressible, steady flows. The rotating coordinate system was adopted to deal with the rotation problem. The Coriolis force and centrifugal force due to the computation in a body-fixed rotating frame of reference were treated explicitly and added to momentum equations as source terms. Furthermore, velocities of entrances were coded to give the correct magnitude and direction needed. Two turbulence closure models (TCMs), the RNG model with wall functions and curvature correction and the Shear Stress Transport (SST) model without the use of wall functions, but with curvature correction and low-Re correction were introduced, respectively. Take DARPA SUBOFF model as the test case, a series of drift angle varying between 0° and 16° at a Reynolds number of 6.53×106 undergoing rotating arm test simulations were conducted. The computed forces and moment as a function of drift angle during the steady turn are mostly in close agreement with available experimental data. Though the difference between the pressure coefficients around the hull form was observed, they always show the same trend. It was demonstrated that using sufficiently fine grids and advanced turbulence models will lead to accurate prediction of the flow field as well as the forces and moments on the hull.     

胶东金翅岭金矿构造控矿规律及找矿预测

金翅岭金矿是胶东招远北部的一个典型石英脉型金矿,构造是金矿最为重要的控矿因素。在前人资料的基础上,综合分析了矿区构造控矿特征,总结了构造控矿规律:矿脉分支复合,表现为NE向矿脉产生SN,NNE向次级矿脉,NNE向矿脉产生NE向次级矿脉;矿体厚度与金品位呈负相关,深部次级矿脉群在P4脉下盘出现;矿脉侧伏角和倾伏向变化处矿体富集,表现为SW向侧伏的P4矿脉,矿体富集于-240 m,侧伏角变大,同时倾伏向由SW向转变为NW向的部位。最后建立了平面和剖面P4矿脉的波形函数,并对深部进行了预测。