Application of Accelerometer Data in Precise Orbit Determination of GRACE -A and -B

We investigate how well the GRACE satellite orbits can be determined using the onboard GPS data combined with the accelerometer data.The preprocessing of the accelerometer data and the methods and models used in the orbit determination are presented.In order to assess the orbit accuracy,a number of tests are made,including external orbit comparison,and through Satellite Laser Ranging (SLR) residuals and K-band ranging (KBR) residuals.It is shown that the standard deviations of the position differences between the so-called precise science orbits (PSO) produced by GFZ,and the single-difference (SD) and zero-difference (ZD) dynamic orbits are about 7 cm and 6 cm,respectively.The independent SLR validation indicates that the overall root-mean-squared (RMS) errors of the SD solution for days 309-329 of 2002 are about 4.93cm and 5.22cm,for GRACE-A and B respectively; theoverall RMS errors of the ZD solution are about 4.25 cm and 4.71 cm,respectively.The relative accuracy between the two GRACE satellites is validated by the KBR data to be on a level of 1.29 cm for the SD,and 1.03 cm for the ZD solution.     

Shock waves and type II radiobursts in the interplanetary medium

The planetary radio astronomy experiment on the Voyager spacecraft observed several type II solar radiobursts at frequencies below 1.3 MHz; these correspond to shock waves at distances between 20R and 1 AU from the Sun. We study the characteristics of these bursts and discuss the information that they give on shock waves in the interplanetary medium and on the origin of the high energy electrons which give rise to the radioemission. The relatively frequent occurence of type II bursts at large distances from the Sun favors the hypothesis of the emission by a longitudinal shockwave. The observed spectral characteristics reveal that the source of emission is restricted to only a small portion of the shock. From the relation between type II bursts, type III bursts and optical flares, we suggest that some of the type II bursts could be excited by type III burst fast electrons which catch up the shock and are then trapped.     

Surface-deformation monitoring in the permafrost regions over the Tibetan Plateau,using Sentinel-1 data

Differential Interferometric Synthetic Aperture Radar(D-In SAR) has been widely used to measure surface deformation over the Tibetan Plateau. However, the accuracy and applicability of the D-In SAR method are not well estimated due to the lack of in-situ validation. In this paper, we mapped the seasonal and long-term displacement of Tanggula(TGL) and Liangdaohe(LDH) permafrost regions with a stack of Sentinel-1 acquisitions using the Small Baseline Subset In SAR(SBAS-In SAR) method. In the TGL region, with its dry soils and sparse vegetation, the In SAR-derived surface-deformation trend was consistent with ground-based leveling results; long-term changes of the active layer showed a settlement rate of around 1 to 3 mm/a due to the melting of ground ice, indicating a degrading permafrost in this area. Around half of the deformation was picked up on monitoring, in contrast with in-situ measurements in LDH, implying that the D-In SAR method remarkably underestimated the surface-deformation. This phenomenon may be induced by the large soil-water content, high vegetation coverage, or a combination of these two factors in this region. This study demonstrates that surface deformation could be mapped accurately for a specific region with Sentinel-1 C-band data, such as in the TGL region.Moreover, although the D-In SAR technology provides an efficient solution for broad surface-deformation monitoring in permafrost regions, it shows a poor performance in the region with high soil-water content and dense vegetation coverage.     

A Refined Model for Solid Particle Rock Erosion

A procedure for the estimation of distribution parameters of a Weibull distribution model K₁ = f(K_Ic^12/4/σ_C^23/4) for solid particle erosion, as recently suggested in Rock Mech Rock Eng, doi: 10.1007/s00603-014-0658-x, 2014, is derived. The procedure is based on examinations of elastic–plastically responding rocks (rhyolite, granite) and plastically responding rocks (limestone, schist). The types of response are quantified through SEM inspections of eroded surfaces. Quantitative numbers for the distribution parameter K₁ are calculated for 30 rock materials, which cover a wide range of mechanical properties. The ranking according to the parameter K₁ is related to qualitative rock classification schemes. A modified proposal for the erosion of schist due to solid particle impingement at normal incidence is introduced.     

Chemical denudation rates in Kärkevagge, Swedish Lapland

This study examines the spatial and temporal variability of chemical denudation rates in Kärkevagge, northern Sweden. The chemical flux rates within the valley are strongly influenced by the local geology. Chemical denudation rates determined for the study period are more than double those previously reported in the literature for this valley. Rates of greater than 46t km⁻² a⁻¹ were measured at the valley mouth over the course of the melt season. This difference is likely due to differences in measurement technique compared to that used by past researchers. This rate is also much higher than for other arctic and alpine watersheds. Chemical denudation in Kärkevagge is comparable to larger temperate rivers. The rapid chemical denudation in Kärkevagge is likely due to sulfide weathering creating acid solutions.     

Lyman-alpha observations of Comet West (1975n)

Images of Comet West in atomic hydrogen (1216 Å) emission were obtained from a sounding rocket on 1976 March 5.5 (R = 0.38 AU). The hydrogen production rate derived from the fit of a simple radial-outflow model to the observed inner isophotes was 3.2 × 10³⁰ atoms/sec. The outer isophotes did not fit the predictions of the complex dynamic model of Keller and Meier, partly because of optical depth effects, but also because the nucleus was breaking up at about this time and it is quite possible that additional hydrogen was being emitted from smaller chunks of the nucleus distributed along the orbit. The above production rate, taken with data on C and O obtained simultaneously by Feldman and Brune, gives Q_H: Q_o: Q_c = 8:3.5:1. For Comet Kohoutek we obtained the ratio 7:1.7:1. The difference, if real, may be due to minor differences in composition or evolution, but in any case it appears that the two comets are similar.     

Improving efficiency in radio surveys for gravitational lenses

Many lens surveys have hitherto used observations of large samples of background sources to select the small minority which are multiply imaged by lensing galaxies along the line of sight. Recently surveys such as SLACS and OLS have improved the efficiency of surveys by pre-selecting double-redshift systems from SDSS. We explore other ways to improve survey efficiency by optimum use of astrometric and morphological information in existing large-scale optical and radio surveys. The method exploits the small position differences between FIRST radio positions of lensed images and the SDSS lens galaxy positions, together with the marginal resolution of some larger gravitational lens systems by the FIRST beam. We present results of a small pilot study with the VLA and MERLIN, and discuss the desirable criteria for future surveys.     

Anomalous luminescence of subglacial sediment at Haut Glacier d'Arolla,Switzerland – a consequence of resetting at the glacier bed?

Swift, D. A., Sanderson, D. C. W., Nienow, P. W., Bingham, R. G. & Cochrane, I. C. 2010: Anomalous luminescence of subglacial sediment at Haut Glacier d'Arolla, Switzerland – a consequence of resetting at the glacier bed? Boreas, Vol. 40, pp. 446–458. 10.1111/j.1502‐3885.2010.00196.x. ISSN 0300‐9483. Luminescence has the potential to elucidate glacial geomorphic processes because primary glacial sediment sources and transport pathways are associated with contrasting degrees of exposure to light. Most notably, sediment entrained from extraglacial sources should be at least partially reset, whereas sediment produced by glacial erosion of subglacial bedrock should retain substantial luminescence commensurate with a geological irradiation history. We set out to test the validity of this assumption at Haut Glacier d'Arolla, Switzerland using sediment sampled extraglacially and from the glacier bed. Contrary to our expectations, the subglacial samples exhibited natural signals that were substantially lower than those of other sample groups, and further (albeit limited) analyses have indicated no obvious differences in sample‐group luminescence characteristics or behaviour that could account for this observation. For glaciological reasons, we can eliminate the possibilities that the subglacial sediment has been extraglacially reset or exposed in situ to heat or light. We therefore advocate investigation of possible resetting processes related to subglacial crushing and grinding, and speculate that such processes, if more generally present, may enable the dating of subglacially deposited tills using luminescence‐based techniques.