Impact of hydrographic parameters and seasonal variation in sediment fluxes on coral status at Chumbe and Bawe reefs,Zanzibar, Tanzania

Coral reefs which are an important resource to coastal communities and nation at large are adversely affected by rate of sediment flux to the reefs. However, there is little information on seasonal trend in sediment flux and its impact at the reefs off Zanzibar. Two years’ monthly data on sedimentation at Chumbe and Bawe reefs were used to assess seasonal variability in sediment flux and its implication on the coral status. Sediment flux to the Bawe reefs for the duration of the study ranged from 0.2 to 41.5 mg cm⁻² d⁻¹, while it ranged from 0.8 to 65.8 mg cm⁻² d⁻¹ at the Chumbe reefs. Sediment fluxes at Bawe reefs were highest between November and March, while they were highest between April and September at Chumbe reefs. Generally, sediment fluxes at Bawe reefs were low compared to those at Chumbe. The total sediment input to the reefs ranged from 4615 to 123,403 kg d⁻¹ for Bawe reefs and 2750 to 79,636 kg d⁻¹ for Chumbe reefs. High sediment fluxes at Bawe reefs between November and March; and the Chumbe reefs between April and September can be attributed to water currents and wind pattern in the east African region which are under the influence of the monsoons. The observed trend suggests that the period for coral transplant as a management option for the two sites should be different. Coral transplant can be undertaken in such a way that stress of the corals due to sedimentation can be felt after they have overcome stress from transplant process and temperature. The results from this study contribute to the much needed information for coral transplant, restoration, and management.     

Herbaceous layer development during spring does not deplete soil nitrogen in the Portuguese montado

Nitrogen (N) content in the soil and in the herbaceous biomass were monitored during spring of 2004-2006 to determine how the herbaceous layer development influences soil N availability in the montado ecosystem of southern Portugal. Highest (246.6 ± 52.7 g m⁻²) and lowest (123.2 ± 89.5 g m⁻²) peak biomass occurred in 2006 and 2005 respectively. Total soil N within the top 20 cm soil profile ranged between 0.2 ± 0.1% in February and 0.41 ± 0.2% in May, while available soil N was lowest (5 ± 2 μg g⁻¹soil) in February but increased three-to-five fold in March and was >17.5 μg g⁻¹soil at senescence in May. Significant (p < 0.001) increase in total N in the aboveground pool occurred between February and May. There was however, no decay in soil N content. Instead, the herbaceous vegetation enhanced soil N input and N retention in the ecosystem. Most of the herbaceous plants were annuals with large reserves of organic N at senescence, which returned to the soil as detritus. The herbaceous vegetation is a critical component of the montado that contributes to N recharge and cycling within the ecosystem.     

Helical probe tests in residual soils of the Appalachian Piedmont

Helical probe tests (HPT) are a quick and economical means for manual field testing of soils to depths of 1.5 m with readings taken at 0.15-m intervals in only 10 min. The equipment is lightweight (only 2 kg) and thus amenable to deploy on initial site reconnaissance explorations, shallow pavement projects, earth retention walls, and/or compaction of fills. Although suitable for use in a variety of geomaterials: sands, silts, clays, and mixed soils, the specific application to residual fine sandy silts and silty fine sands of the Appalachian Piedmont and Blue Ridge geologic provinces is shown here. Existing relationships for converting the measured HPT torque reading to equivalent cone penetration testing (CPT) tip resistances are reviewed, as well as other trends.     

Workplace environmental demands and energizers at two Kuwait oil companies

The Work Compatibility Improvement Framework was developed and used to assess the environmental and ergonomic work conditions at two oil companies in Kuwait: One is a government-owned company, while the other is a private subcontractor of the government-owned company. The work compatibility presents demand–energizer environmental factors that act upon the individuals in the workplace. The reliability coefficients were tested and considered good (0.752) and excellent (0.855) for two domain conditions environment and ergonomics, respectively. Results reveal that in all of the three regions of the government-owned company (north, southwest, east) the ‘overall’ compatibility data for the ‘environment’ is perceived to be poor. The ‘ergonomics’ compatibility data seem to be average in the southeast and west, while it is considered to be poor in the north. As for the private subcontractor, the perceived ‘environment’ is considered to be poor for two departments out of four (slickline and wellhead maintenance), while considered moderate for the remaining two (maintenance and crude/chemical handling). The ‘ergonomics’ compatibility is reported to be poor for crude/chemical handling and wellhead maintenance jobs; while the conditions seem to be moderate for the maintenance and slickline jobs. The major conclusion extracted from this study is that the oil sector organizations in Kuwait are not managed as ergo-environmental enterprises where there is disharmony in the ergonomics system, environmental system, and the ergo-environmental interface interaction. These gaps in the enterprise-wide systems have a significant impact on work productivity and the environment conditions.     

Holocene profile changes along a California coastal stream

Walker Creek in Marin County, California is a coastal stream draining to Tomales Bay, which lies in the San Andreas Rift Zone. Its valley contains an alluvial fill with a basal gravel dated at 5000 years BP. In upstream parts of the watershed, channels are incised arroyo-like in the fill leaving the valley floor standing as a high terrace averaging 5·5 m (18 ft) high. Below this terrace is an inner terrace of historic age that stands 2·4 m (8 ft) above the streambed. The stratigraphy and morphology of this valley are seen in others nearby, and indicate that in the last half of Holocene time in this region a single episode of valley alluviation was followed by two episodes of valley cutting. The second episode of valley cutting is occurring in the present time. During the last 60 years the flow has become seasonal, the stream has incised 1·5 m (5 ft) below the inner terrace in upstream reaches, aggraded 1·2 m (4 ft) in downstream reaches, and extended its estuary. Incision upstream has begun to re-expose the bedrock valley floor and is associated with aggradation downstream that has caused the flood plain to overtop both terraces. This has decreased the stream's gradient. Using a stream that is currently effecting major changes in its valley and channel morphology, two aspects of hydraulic adjustment in fluvial systems are examined. The changes in the average slope of the longitudinal profile are small but measureable. Profile concavity has not changed measurably. The various profiles that have existed in Holocene time show that stream gradient can be, but is not necessarily, slightly adjusted during valley filling and cutting. Flow measurements at a high discharge show that the channel has begun to assume the hydraulic geometry of an ephemeral channel. Adjustments of depth, velocity, and roughness appear to be hydraulic adjustments in response to changing watershed conditions.     

Mathematical models for petroleum-forming processes: carbon isotope fractionation

A mathematical model has been developed in which carbon isotope fractionation during thermal cracking of n-paraffins can be simulated. The model has been calibrated based on data from laboratory cracking experiments carried out on n-octadecane. Relative rate constants for cleavage of C¹²-C¹², C¹²-C¹³ and C¹³-C¹³ bonds agree with the experimental values obtained by other workers.Application of this model to the process of petroleum formation gives good agreement with some existing experimental data, but suggests that a review of our understanding of isotope fractionation during thermal cracking may be necessary. The relative importance of the degree to which the organic material has been cracked and of the type of the organic material in influencing δC¹³ values is discussed.The present model predicts that cracking of n-paraffin distributions having initial odd or even carbon number predominances can induce isotopic inhomogeneity among the homologs of the resulting distribution. The model exhibits some deficiencies in explaining or predicting the δC¹³ values of ethane and propane in relation to methane in gases and of oils and associated methane. Explanations for these discrepancies may lie in the simplicity of our mathematical model, in our assumption of initial isotopic homogeneity within molecules and in our use of only n-paraffins as the source molecules for the cracking reactions.     

Stratification and bottom-water hypoxia in the Pamlico River estuary

Relationships among bottom-water dissolved oxygen (DO), vertical stratification, and the factors responsible for stratification-destratification in this shallow, low tidal-energy estuary were studied using a 15-yr set of biweekly measurements, along with some recent continuous-monitoring data. Hypoxia develops only when there is both vertical water-column stratification and warm water temperature (>15°C). In July, 75% of the DO readings were <5 mg 1^?1, and one-third were <1 mg 1^?1. Severe hypoxia occurs more frequently in the upper half of the estuary than near the mouth. Both the time series data and correlation analysis results indicate that stratification events and DO levels are tightly coupled with variations in freshwater discharge and wind stress. Stratification can form or disappear in a matter of hours, and episodes lasting from one to several days seem to be common. Estimated summertime respiration rates in the water and sediments are sufficient to produce hypoxia if the water is mixed only every 6–12 d. There has been no trend toward lower bottom water DO in the Pamlico River Estuary over the past 15 yr. *** DIRECT SUPPORT *** A01BY059 00002     

Melt extraction and melt refertilization in mantle peridotite of the Coast Range ophiolite: an LA–ICP–MS study

The middle Jurassic Coast Range Ophiolite (CRO) is one of the most important tectonic elements in western California, cropping out as tectonically dismembered elements that extend 700 km from south to north. The volcanic and plutonic sections are commonly interpreted to represent a supra-subduction zone (SSZ) ophiolite, but models specifying a mid-ocean ridge origin have also been proposed. These contrasting interpretations have distinctly different implications for the tectonic evolution of the western Cordillera in the Jurassic. If an SSZ origin is confirmed, we can use the underlying mantle peridotites to elucidate melt processes in the mantle wedge above the subduction zone. This study uses laser ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS) to study pyroxenes in peridotites from four mantle sections in the CRO. Trace element signatures of these pyroxenes record magmatic processes characteristic of both mid-ocean ridge and supra-subduction zone settings. Group A clinopyroxene display enriched REE concentrations [e.g., Gd (0.938–1.663 ppm), Dy (1.79–3.24 ppm), Yb (1.216–2.047 ppm), and Lu (0.168–0.290 ppm)], compared to Group B and C clinopyroxenes [e.g., Gd (0.048–0.055 ppm), Dy (0.114–0.225 ppm), Yb (0.128–0.340 ppm), and Lu (0.022–0.05 ppm)]. These patterns are also evident in orthopyroxene. The differences between these geochemical signatures could be a result of a heterogeneous upper mantle or different degrees of partial melting of the upper mantle. It will be shown that CRO peridotites were generated through fractional melting. The shapes of REE patterns are consistent with variable degrees of melting initiated within the garnet stability field. Models call for 3% dry partial melting of MORB-source asthenosphere in the garnet lherzolite field for abyssal peridotites and 15–20% further partial melting in the spinel lherzolite field, possibly by hydrous melting for SSZ peridotites. These geochemical variations and occurrence of both styles of melting regimes within close spatial and temporal association suggest that certain segments of the CRO may represent oceanic lithosphere, attached to a large-offset transform fault and that east-dipping, proto-Franciscan subduction may have been initiated along this transform.     

Radium uptake during barite recrystallization at 23 ± 2 °C as a function of solution composition: An experimental Ba and Ra tracer study

High-purity synthetic barite powder was added to pure water or aqueous solutions of soluble salts (BaCl₂, Na₂SO₄, NaCl and NaHCO₃) at 23 ± 2 °C and atmospheric pressure. After a short pre-equilibration time (4 h) the suspensions were spiked either with ¹³³Ba or ²²⁶Ra and reacted under constant agitation during 120-406 days. The pH values ranged from 4 to 8 and solid to liquid (S/L) ratios varied from 0.01 to 5 g/l. The uptake of the radiotracers by barite was monitored through repeated sampling of the aqueous solutions and radiometric analysis. For both ¹³³Ba and ²²⁶Ra, our data consistently showed a continuous, slow decrease of radioactivity in the aqueous phase.Mass balance calculations indicated that the removal of ¹³³Ba activity from aqueous solution cannot be explained by surface adsorption only, as it largely exceeded the 100% monolayer coverage limit. This result was a strong argument in favor of recrystallization (driven by a dissolution-precipitation mechanism) as the main uptake mechanism. Because complete isotopic equilibration between aqueous solution and barite was approached or even reached in some experiments, we concluded that during the reaction all or substantial fractions of the initial solid had been replaced by newly formed barite.The ¹³³Ba data could be successfully fitted assuming constant recrystallization rates and homogeneous distribution of the tracer into the newly formed barite. An alternative model based on partial equilibrium of ¹³³Ba with the mineral surface (without internal isotopic equilibration of the solid) could not reproduce the measured activity data, unless multistage recrystallization kinetics was assumed. Calculated recrystallization rates in the salt solutions ranged from 2.8 × 10⁻¹¹ to 1.9 × 10⁻¹⁰ mol m⁻² s⁻¹ (2.4-16 μmol m⁻² d⁻¹), with no specific trend related to solution composition. For the suspensions prepared in pure water, significantly higher rates (∼5.7 × 10⁻¹⁰ mol m⁻² s⁻¹ or ∼49 μmol m⁻² d⁻¹) were determined.Radium uptake by barite was determined by monitoring the decrease of ²²⁶Ra activity in the aqueous solution with alpha spectrometry, after filtration of the suspensions and sintering. The evaluation of the Ra uptake experiments, in conjunction with the recrystallization data, consistently indicated formation of non-ideal solid solutions, with moderately high Margules parameters (W_AB = 3720-6200 J/mol, a₀ = 1.5-2.5). These parameters are significantly larger than an estimated value from the literature (W_AB = 1240 J/mol, a₀ = 0.5).In conclusion, our results confirm that radium forms solid solutions with barite at fast kinetic rates and in complete thermodynamic equilibrium with the aqueous solutions. Moreover, this study provides quantitative thermodynamic data that can be used for the calculation of radium concentration limits in environmentally relevant systems, such as radioactive waste repositories and uranium mill tailings.