Semisubmersible response to transient ice forces

The paper presents an analytical and experimental study on the transient response of semisubmersibles to bergybit impact and the strength of bergybit ice to high strain-rate loadings. Two approaches have been proposed for the solution of the semisubmersible-bergybit interaction problem, one using the energy approach and the other using the conventional structural dynamics approach with initial velocity conditions. In addition the local behaviour of the impacted regions have been analysed for deformation and failure. Numerical results have been given for local behaviour of an impacted column and global behaviour of semisubmersible-bergybit system. Experimental study has been reported on the impact strength of iceberg ice at strain rates of 10⁻³, 10⁻² and 10⁻¹; the indentation impact strength of ice is found to be 3–4 times the unaixial compressive strength, at the same strain rate.     

Distributions of dissolved and particulate biogenic thiols in the subartic Pacific Ocean

Dissolved and particulate concentrations of the biogenic thiols cysteine (Cys), arginine–cysteine (Arg–Cys), glutamine–cysteine (Gln–Cys), γ-glutamate–cysteine (γ-Glu–Cys) and glutathione (GSH) were measured in the subartic Pacific Ocean in the summer of 2003 using high performance liquid chromatography (HPLC) with precolumn derivatization as reported in previous work. In this study, a preconcentration protocol for the derivatized thiols was utilized to extend detection limits of dissolved thiols to picomolar levels. The measured concentrations of particulate and dissolved thiols were uncoupled, with distinctive depth profiles and large differences in the particulate to dissolved ratios between individual compounds. Glutathione was the most abundant particulate thiol whereas the most abundant dissolved thiol was γ-Glu–Cys, with concentrations as high as 15 nM. Given the relatively small pool of intracellular γ-Glu–Cys and the very low dissolved concentrations of GSH, we hypothesize that glutathione released from cells is rapidly converted to the potentially degradation resistant γ-Glu–Cys outside the cell. The relatively high concentrations of other dissolved thiols compared to particulate concentrations implies both biological exudation and slow degradation rates. Some thiols appear to vary with changes in nutrient availability but this effect is difficult to decouple from changes in community structure inferred from pigment analyses. Dissolved thiol concentrations also exceed typical metal concentrations in the subartic Pacific, supporting previous arguments that they may be important in metal speciation.     

Effects of variable winds on biological productivity on continental shelves in coastal upwelling systems

The production and distribution of biological material in wind-driven coastal upwelling systems are of global importance, yet they remain poorly understood. Production is frequently presumed to be proportional to upwelling rate, yet high winds can lead to advective losses from continental shelves, where many species at higher trophic levels reside. An idealized mixed-layer conveyor (MLC) model of biological production from constant upwelling winds demonstrated previously that the amount of new production available to shelf species increased with upwelling at low winds, but declined at high winds [Botsford, L.W., Lawrence, C.A., Dever, E.P., Hastings, A., Largier, J., 2003. Wind strength and biological productivity in upwelling systems: an idealized study. Fisheries Oceanography 12, 245–259]. Here we analyze the response of this model to time-varying winds for parameter values and observed winds from the Wind Events and Shelf Transport (WEST) study region. We compare this response to the conventional view that the results of upwelling are proportional to upwelled volume. Most new production per volume upwelled available to shelf species occurs following rapid increases in shelf transit time due to decreases in wind (i.e. relaxations). However, on synoptic, event time-scales shelf production is positively correlated with upwelling rate. This is primarily due to the effect of synchronous periods of low values in these time series, paradoxically due to wind relaxations. On inter-annual time-scales, computing model production from wind forcing from 20 previous years shows that these synchronous periods of low values have little effect on correlations between upwelling and production. Comparison of model production from 20 years of wind data over a range of shelf widths shows that upwelling rate will predict biological production well only in locations where cross-shelf transit times are greater than the time required for phytoplankton or zooplankton production. For stronger mean winds (narrower shelves), annual production falls below the peak of constant wind prediction [Botsford et al., 2003. Wind strength and biological productivity in upwelling systems: an idealized study. Fisheries Oceanography 12, 245–259], then as winds increase further (shelves become narrower) production does not decline as steeply as the constant wind prediction.     

Analysis of seawater for dissolved cadmium, copper and lead: An intercomparison of voltammetric and atomic absorption methods

An intercomparison study of voltammetric and atomic absorption spectrometric methods for determining cadmium, lead and copper in seawater samples was conducted. The voltammetric approach utilizes differential pulse anodic stripping voltammetry using a rotating, glassy carbon, mercury film electrode under conditions developed to minimize contamination sources and to enhance sensitivity for seawater matrices. The atomic absorption approach involves a concentration step using either an organic solvent extraction of metal dithiocarbamate chelates or a Chelex-100 column with detection by graphite furnace atomic absorption spectrometry. Similar and consistent results were obtained using both methods for the three trace metals studied on a wide range of natural seawater samples. Both methods are comparable in sensitivity for cadmium and copper, however the voltammetric method is better suited for the analysis of lead in seawater because of its enhanced sensitivity and low blank. An advantage of the voltammetric approach is its amenability towards real-time shipboard analysis.     

Bioerosion by chemosynthetic biological communities on Holocene submarine slide scars

Geomorphic, stratigraphic, and faunal observations of submarine slide scars that occur along the flanks of Monterey Canyon in 2.0–2.5 km water depths were made to identify the processes that continue to alter the surface of a submarine landslide scar after the initial slope failure. Deep-sea chemosynthetic biological communities and small caves are common on the sediment-free surfaces of the slide scars, especially along the headwall. The chemosynthetic organisms observed on slide scars in Monterey Canyon undergo a faunal succession based in part on their ability to maintain their access to the redox boundaries in the sediment on which they depend on as an energy source. By burrowing into the seafloor, these organisms are able to follow the retreating redox boundaries as geochemical re-equilibration occurs on the sole of the slide. As these organisms dig into the seafloor on the footwall, they often generate small caves and weaken the remaining seafloor. While chemosynthetic biological communities are typically used as indicators of fluid flow, these communities may be supported by methane and hydrogen sulfide that are diffusing out of the fresh seafloor exposed at the sole of the slide by the slope failure event. If so, these chemosynthetic biological communities may simply mark sites of recent seafloor exhumation, and are not reliable fluid seepage indicators.     

Application of wavelet transforms to the decoupling of free-roll decay data

This study presents the results of the decoupling of a free-roll decay test by wavelet transforms. A free-roll decay test was performed to determine the coefficients of damping terms in equations of motion. No motion of the model was restricted during the experiment. A slight yaw motion was found while the model was in the free-roll decay motion. It was necessary to extract a pure roll motion from the experimental data. Wavelet transforms were applied to the signals to extract the pure roll motion. The results were compared to those found through the Fourier transform. Discrete wavelet transforms were able to efficiently decouple the test signals, while the continuous wavelet transform and the Fourier transform could not.     

Copper, lead and cadmium in coastal waters of the western North Sea

Cadmium, lead and copper have been determined in both dissolved and particulate phases for 130 surface-water samples from the coastal zone of Scotland and England in the western North Sea. The concentrations reported are, in general, lower than those published previously for the same area.The distribution of total metal concentration between the dissolved and particulate phases varies for the three elements. The lead distribution is dominated by its associations with particulate material while cadmium shows the reverse behaviour, existing almost totally in the dissolved phase. Copper is intermediate in behaviour, with the dissolved phase generally being dominant.An inverse relationship between salinity and dissolved copper concentration suggests a freshwater origin for this element. It is suggested that sedimentary and/or anthropogenic sources affect dissolved copper concentrations in coastal waters. The dissolved lead distribution reveals plumes of contaminated coastal water. The lead distribution is, however, dominated by associations with particulate material and sediments which produce a sharp concentration gradient close to the coast. The Humber estuary is identified as a significant source of cadmium to the North Sea.     

Problems with biogenic silica measurement in marginal seas

Surface sediment samples from the Bohai, Yellow Sea, and the Pacific were used to assess biogenic silica (BSi) content and to study uncertainties in BSi measurements. The contents of BSi in the Bohai and Yellow Sea are all less than 1%. The dissolution of BSi in sediments from the Bohai and Yellow Sea is very important to maintain high levels of silicate in the water column. The non-biogenic silica from clay minerals has an obvious effect on BSi of sediment samples in the Bohai and Yellow Sea with low BSi and high clay minerals. The solid to solution ratio was found to have a great influence on BSi measurement, which can induce uncertainties up to 75%. The effect of loss by sorption and centrifugation is negligible. Interlaboratory comparison of techniques for BSi measurement by the wet alkaline extraction technique of Mortlock and Froelich [Deep-Sea Res. 36 (1989) 1415-1426] with clay correction was suggested to give no significant differences. However, differences in sediment compositions and reagent to sample ratio may limit the application of the wet alkaline extraction method.     

The Equatorial Atlantic Mid-Ocean Channel: An Ultra High-Resolution Image of Its Burial History Based on TOPAS Profiles

Multibeam bathymetric and ultra high-resolution seismic data reveal that the distal course of the Equatorial Atlantic Mid-Ocean Channel (EAMOC) extends further east and south than was previously known, and is controlled by the presence of morphologic highs related to the Fernando de Noronha Fracture Zone. Distal course of the EAMOC is buried by sediments, and does not have bathymetric expression on the seafloor. The channel fill consists of three seismic sequences, suggesting that the recent geological evolution of the channel is composed of successive phases of decreasing sedimentary activity that finally resulted in its complete burial. Tectonic and volcanic activity related to the Fernando de Noronha Fracture Zone and Ridge, together with the effect of strong pulses of the Antarctic bottom water current during the upper Pliocene are suggested to have contributed to the progressive burial and the final abandonment of the EAMOC.