The activity of silica in kimberlites,revisited

The activity of silica in a silicate liquid in equilibrium with olivine and orthopyroxene decreases with increasing pressure. In contrast, the activity of silica in an unbuffered silicate liquid changes little with pressure. Although the implications of these pressure dependencies have been considered by previous authors in terms of inferring pressures of origin of magmas, less consideration has been given to the implications of these dependencies on the evolution of the magma en route to the surface, or to the mantle through which the magma passes. In this paper, a combination of Schreinemakers’ analysis in isothermal section and calculated reactions in space is used to (a) rationalize the absence of orthopyroxene xenocrysts in kimberlites and the relative abundance of olivine “megacrysts” therein, (b) propose another reason for the paucity of xenocrystic mantle-derived carbonates in kimberlites, (c) explain why clinopyroxene is much less reactive in the kimberlite melt than is orthopyroxene, and (d) explore the implications of the relative stabilities of olivine, orthopyroxene, and clinopyroxene in kimberlitic magma for the mantle through which the magma transits.

---

Diffusion of divalent cations in garnet: multi-couple experiments

We demonstrate the possibility of studying several diffusion couples in a single run, i.e. under almost similar P–T–t– conditions, allowing direct comparison of the diffusion rates in different diffusion couples. Thus the duration of experimental study and the risk of failure of expensive experimental equipment can be decreased considerably. The diffusion experiments were carried out in piston-cylinder apparatus. Gem-quality garnets of almandine, spessartine and grossular compositions together with inclusion-rich eclogitic garnets were embedded in a powder of natural pyrope and annealed together under dry conditions at P = 1.9–3.2 GPa and T = 1,070–1,400°C. Diffusion profiles were measured by electron microprobe and fitted numerically on the basis of multicomponent diffusion theory. The datasets derived from different diffusion couples yields parameters of the Arrhenius equation for Ca, Mg and Fe in natural eclogitic garnets and Mg, Mn and Fe in gem-quality garnets. We have also studied the effect of grain-boundary diffusion in the sintered pyrope matrix on interdiffusion on the basis of 2D modeling. Under conditions analogous to those of our experimental runs, we show that observed irregularities in some measured diffusion profiles (not applied for the diffusion modeling) can be directly related to the superposition of local grain-boundary diffusion on dominant volume diffusion.     

The dissolved Beryllium isotope composition of the Arctic Ocean

We present the first comprehensive set of dissolved ¹⁰Be and ⁹Be concentrations in surface waters and vertical profiles of all major sub-basins of the Arctic Ocean, which are complemented by data from the major Arctic rivers Mackenzie, Lena, Yenisey and Ob. The results show that ¹⁰Be and ⁹Be concentrations in waters below 150 m depth are low and only vary within a factor of 2 throughout the Arctic Basin (350-750 atoms/g and 9-15 pmol/kg, respectively). In marked contrast, Be isotope compositions in the upper 150 m are highly variable and show systematic variations. Cosmogenic ¹⁰Be concentrations range from 150 to 1000 atoms/g and concentrations of terrigenous ⁹Be range from 7 to 65 pmol/kg, resulting in ¹⁰Be/⁹Be ratios (atom/atom) between 0.5 and 14 × 10⁻⁸. Inflowing Atlantic water masses in the Eurasian Basin are characterized by a ¹⁰Be/⁹Be signature of 7 × 10⁻⁸. The inflow of Pacific water masses across the Bering Strait is characterized by lower ratios of 2-3 × 10⁻⁸, which can be traced into the central Arctic Ocean, possibly as far as the Fram Strait. A comparison of the high dissolved surface ¹⁰Be and ⁹Be concentrations (corresponding to low ¹⁰Be/⁹Be signatures of ∼2 × 10⁻⁸) in the Eurasian Basin with hydrographic parameters and river data documents efficient and rapid transport of Be with Siberian river waters across the Siberian Arctic shelves into the central Arctic Basin, although significant loss and exchange of Be on the shelves occurs. In contrast, fresh surface waters from the Canada Basin also show high cosmogenic ¹⁰Be contents, but are not enriched in terrigenous ⁹Be (resulting in high ¹⁰Be/⁹Be signatures of up to 14 × 10⁻⁸). This is explained by a combination of efficient scavenging of Be in the Mackenzie River estuary and the shelves and additional supply of cosmogenic ¹⁰Be via atmospheric fallout and melting of old sea ice. The residence time of Be in the deep Arctic Ocean estimated from our data is 800 years and thus similar to the average Be residence time in the global ocean.     

The El Teniente porphyry Cu–Mo deposit from a hydrothermal rutile perspective

Mineralogical, textural, and chemical analyses (EPMA and PIXE) of hydrothermal rutile in the El Teniente porphyry Cu–Mo deposit help to better constrain ore formation processes. Rutile formed from igneous Ti-rich phases (sphene, biotite, Ti-magnetite, and ilmenite) by re-equilibration and/or breakdown under hydrothermal conditions at temperatures ranging between 400°C and 700°C. Most rutile nucleate and grow at the original textural position of its Ti-rich igneous parent mineral phase. The distribution of Mo content in rutile indicates that low-temperature (∼400–550°C), Mo-poor rutile (5.4 ± 1.1 ppm) is dominantly in the Mo-rich mafic wallrocks (high-grade ore), while high-temperature (∼550-700°C), Mo-rich rutile (186 ± 20 ppm) is found in the Mo-poor felsic porphyries (low-grade ore). Rutile from late dacite ring dikes is a notable exception to this distribution pattern. The Sb content in rutile from the high-temperature potassic core of the deposit to its low-temperature propylitic fringe remains relatively constant (35 ± 3 ppm). Temperature and Mo content of the hydrothermal fluids in addition to Mo/Ti ratio, modal abundance and stability of Ti-rich parental phases are key factors constraining Mo content and provenance in high-temperature (≥550°C) rutile. The initial Mo content of parent mineral phases is controlled by melt composition and oxygen fugacity as well as timing and efficiency of fluid–melt separation. Enhanced reduction of SO₂-rich fluids and sulfide deposition in the Fe-rich mafic wallrocks influences the low-temperature (≤550°C) rutile chemistry. The data are consistent with a model of fluid circulation of hot (>550°C), oxidized (ƒO₂ ≥ NNO + 1.3), SO₂-rich and Mo-bearing fluids, likely exsolved from deeper crystallizing parts of the porphyry system and fluxed through the upper dacite porphyries and related structures, with metal deposition dominantly in the Fe-rich mafic wallrocks.     

Zircon U–Pb age, trace element and Hf isotope composition of Kongling terrane in the Yangtze Craton: refining the timing of Palaeoproterozoic high-grade metamorphism

U–Pb age, trace element and Hf isotope compositions of zircon were analysed for a metasedimentary rock and two amphibolites from the Kongling terrane in the northern part of the Yangtze Craton. The zircon shows distinct morphological and chemical characteristics. Most zircon in an amphibolite shows oscillatory zoning, high Th/U and ¹⁷⁶Lu/¹⁷⁷Hf ratios, high formation temperature, high trace element contents, clear negative Eu anomaly, as well as HREE-enriched patterns, suggesting that it is igneous. The zircon yields a weighted mean ²⁰⁷Pb/²⁰⁶Pb age of 2857 ± 8 Ma, representing the age of the magmatic protolith. The zircon in the other two samples is metamorphic. It has low Th/U ratios, low trace element concentrations, variable HREE contents (33.8 ≥ Lu_N≥2213; 14.7 ≤ Lu_N/Sm_N ≤ 354) and ¹⁷⁶Lu/¹⁷⁷Hf ratios (0.000030–0.001168). The data indicate that the zircon formed in the presence of garnet and under upper amphibolite facies conditions. The metamorphic zircon yields a weighted mean ²⁰⁷Pb/²⁰⁶Pb age of 2010 ± 13 Ma. These results combined with previously obtained Palaeoproterozoic metamorphic ages suggest a c. 2.0 Ga Palaeoproterozoic collisional event in the Yangtze Craton, which may result from the assembly of the supercontinent Columbia. The zircon in two samples yields weighted mean two-stage Hf model ( T _DM2) ages of 3217 ± 110 and 2943 ± 50 Ma, respectively, indicating that their protoliths were mainly derived from Archean crust.     

A Distributed Geoprocessing Concept for Enhancing Terrain Analysis for Environmental Modeling

Geographic Information Systems (GIS) are well suited to support environmental modeling for dealing with space. However, some of the limitations of current GIS are the lack of tools for comprehensive documentation of the models, the inadequate representation of fields, and the deficient methodology for comprehensive management of uncertainty. Using Digital Terrain Modeling and Analysis as an example, this paper proposes an enhanced approach to overcome these drawbacks. It suggests implementing sophisticated functionality for modeling and analysis of fields in special-purpose modules outside monolithic GIS. These modules include three components: (1) an extensive framework for metainformation that allows a sound assessment of the fitness-for-use of digital field representations for environmental modeling applications, (2) an explicit digital representation of the field phenomenon equipped with the appropriate tools for the derivation of data, and (3) the methods to assess the quality of derived data. A standardized interface enables communication between the module and other software components. The presented modular approach combines the functionality of common GIS with highly specialized modeling and analysis tools encapsulating expert knowledge about the represented phenomena.     

HYDROLOGIC TEST SYSTEM FOR FRACTURE FLOW STUDIES IN CRYSTALLINE ROCK

Abstract. A hydrologic test system has been designed to measure the intrinsic permeabilities of individual fractures in crystalline rock. This report contains the design schematics and specifications necessary to build and/or modify this test system for other similar field applications. This system is used to conduct constant pressure/declining flow rate and pressure pulse hydraulic tests. The system is composed of four distinct units: (1) The Packer System, (2) Injection System, (3) Collection System, and (4) Electronic Data Acquisition System. The apparatus is built in modules so it can be easily transported and reassembled. It is also designed to operate over a wide range of pressures (0–300 psig) and flow rates (0.2–1.0 gal/min). This system has proved extremely effective and versatile in its use at the Climax Facility, Nevada Test Site.     

Watching meteors on Triton

The thin atmosphere of Neptune's moon Triton is dense enough to ablate micrometeoroids as they pass through. A combination of Triton's orbital velocity around Neptune and its orbital velocity around the Sun gives a maximum meteoroid impact velocity of approximately 19 km s⁻¹, sufficient to heat the micrometeoroids to visibility as they enter. The ablation profiles of icy and stony micrometeoroids were calculated, along with the estimated brightness of the meteors. In contrast to the terrestrial case, visible meteors would extend very close to the surface of Triton. In addition, the variation in the meteoroid impact velocity as Triton orbits Neptune produces a large variation in the brightness of meteors with orbital phase, a unique Solar System phenomenon.     

Analysis of seawater for dissolved cadmium, copper and lead: An intercomparison of voltammetric and atomic absorption methods

An intercomparison study of voltammetric and atomic absorption spectrometric methods for determining cadmium, lead and copper in seawater samples was conducted. The voltammetric approach utilizes differential pulse anodic stripping voltammetry using a rotating, glassy carbon, mercury film electrode under conditions developed to minimize contamination sources and to enhance sensitivity for seawater matrices. The atomic absorption approach involves a concentration step using either an organic solvent extraction of metal dithiocarbamate chelates or a Chelex-100 column with detection by graphite furnace atomic absorption spectrometry. Similar and consistent results were obtained using both methods for the three trace metals studied on a wide range of natural seawater samples. Both methods are comparable in sensitivity for cadmium and copper, however the voltammetric method is better suited for the analysis of lead in seawater because of its enhanced sensitivity and low blank. An advantage of the voltammetric approach is its amenability towards real-time shipboard analysis.