Evolution of tuff ring-dome complex: the case study of Cerro Pinto, eastern Trans-Mexican Volcanic Belt

Cerro Pinto is a Pleistocene rhyolite tuff ring-dome complex located in the eastern Trans-Mexican Volcanic Belt. The complex is composed of four tuff rings and four domes that were emplaced in three eruptive stages marked by changes in vent location and eruptive character. During Stage I, vent clearing produced a 1.5-km-diameter tuff ring that was then followed by emplacement of two domes of approximately 0.2 km³ each. With no apparent hiatus in activity, Stage II began with the explosive formation of a tuff ring ~2 km in diameter adjacent to and north of the earlier ring. Subsequent Stage II eruptions produced two smaller tuff rings within the northern tuff ring as well as a small dome that was mostly destroyed by explosions during its growth. Stage III involved the emplacement of a 0.04 km³ dome within the southern tuff ring. Cerro Pinto’s eruptive history includes sequences that follow simple rhyolite-dome models, in which a pyroclastic phase is followed immediately by effusive dome emplacement. Some aspects of the eruption, however, such as the explosive reactivation of the system and explosive dome destruction, are more complex. These events are commonly associated with polygenetic structures, such as stratovolcanoes or calderas, in which multiple pulses of magma initiate reactivation. A comparison of major and trace element geochemistry with nearby Pleistocene silicic centers does not show indication of any co-genetic relationship, suggesting that Cerro Pinto was produced by a small, isolated magma chamber. The compositional variation of the erupted material at Cerro Pinto is minimal, suggesting that there were not multiple pulses of magma responsible for the complex behavior of the volcano and that the volcanic system was formed in a short time period. The variety of eruptive style observed at Cerro Pinto reflects the influence of quickly exhaustible water sources on a short-lived eruption. The rising magma encountered small amounts of groundwater that initiated eruption phases. Once a critical magma:water ratio was exceeded, the eruptions became dry and sub-plinian to plinian. The primary characteristic of Cerro Pinto is the predominance of fall deposits, suggesting that the level at which rising magma encountered water was deep enough to allow substantial fragmentation after the water source was exhausted. Isolated rhyolite domes are rare and are not currently viewed as prominent volcanic hazards, but the evolution of Cerro Pinto demonstrates that individual domes may have complex cycles, and such complexity must be taken into account when making hazard risk assessments.     

Data reporting norms for 40Ar/39Ar geochronology

Data reported in ⁴⁰Ar/³⁹Ar geochronology studies are commonly insufficient to allow computation of ages. This deficiency renders it difficult to compare ages based on different standards or constants, and often hinders critical evaluation of the results. Herein are presented an enumeration of the data that should be reported in all ⁴⁰Ar/³⁹Ar studies, including a discussion in support of these requirements. The minimum required data are identified and distinguished from parameters that are useful but may be derived from them by calculation. Finally, recommendations are made for metadata needed to document age calculations (e.g., from age spectrum or isochron analyses).     

A novel mobile multipole system (MUCEP) for shallow (0–3 m) geoelectrical investigation: the ‘Vol-de-canards’ array

The aim of this paper is to point out the advantages of multipoles for the exploration of the very near subsurface (0–3 m) by continuous profiling. We propose a new geometry with eight poles for a MUltipole Continuous Electrical Profiling (MUCEP) measuring system, where the array has a V-shape and is thus called ‘Vol-de-canards’. A series of criteria including 3D numerical simulations are performed (direct and inverse modelling) to determine the optimal geometry and to compare its performance (in terms of depth of investigation and resolution of the geometry of the targets) with the other arrays (quadrupoles or rectangular-type multipoles). This multipole was built together with a real-time acquisition system. The multidepth maps obtained confirm the characteristics predicted by numerical simulations.     

Petrology and geochronology of basalt breccia from the 1996 earthquake swarm of Loihi seamount, Hawaii: magmatic history of its 1996 eruption

 Samples of basalt were collected during the Rapid Response cruise to Loihi seamount from a breccia that was probably created by the July to August 1996 Loihi earthquake swarm, the largest swarm ever recorded from a Hawaiian volcano. ²¹⁰Po–²¹⁰Pb dating of two fresh lava blocks from this breccia indicates that they were erupted during the first half of 1996, making this the first documented historical eruption of Loihi. Sonobuoys deployed during the August 1996 cruise recorded popping noises north of the breccia site, indicating that the eruption may have been continuing during the swarm. All of the breccia lava fragments are tholeiitic, like the vast majority of Loihi's most recent lavas. Reverse zoning at the rim of clinopyroxene phenocrysts, and the presence of two chemically distinct olivine phenocryst populations, indicate that the magma for the lavas was mixed just prior to eruption. The trace element geochemistry of these lavas indicates there has been a reversal in Loihi's temporal geochemical trend. Although the new Loihi lavas are similar isotopically and geochemically to recent Kilauea lavas and the mantle conduits for these two volcanoes appear to converge at depth, distinct trace element ratios for their recent lavas preclude common parental magmas for these two active volcanoes. The mineralogy of Loihi's recent tholeiitic lavas signify that they crystallized at moderate depths (∼8–9 km) within the volcano, which is approximately 1 km below the hypocenters for earthquakes from the 1996 swarm. Taken together, the petrological and seismic evidence indicates that Loihi's current magma chamber is considerably deeper than the shallow magma chamber (∼3–4 km) in the adjoining active shield volcanoes. Received: 21 August 1997 / Accepted: 15 February 1998     

Model study of the effect of the main ionospheric trough on oblique HF radiowave propagation

The purpose of this paper is to study the effect of the main ionospheric trough location on the form of oblique sounding ionograms on the Murmansk-St. Petersburg subauroral radio path. Using a mathematical model of the high-latitude ionosphere, we have calculated four different distributions of electron density along the radio path. One of the distributions has been obtained when the trough is absent, and the remaining three distributions contain troughs of approximately identical depth and width but located at different distances from the ends of the radio path. Using the program of two-dimensional ray tracing, we numerically synthesized oblique-incidence ionograms for each of the four obtained distributions of electron density. The calculations have shown that the location of the main ionospheric trough affects considerably the shape of oblique-incidence ionograms.     

The composition of nutrient fluxes from contrasting UK river basins

Accurate estimates of N and P loads were obtained for four contrasting UK river basins over a complete annual cycle. The fractionation of these loads into dissolved and particulate, and inorganic and organic components allowed a detailed examination of the nutrient load composition and of the factors influencing both the relative and absolute magnitude of these components. The particulate phosphorus (TPP) loads account for 26–75% of the annual total phosphorus (TP) transport and are predominantly inorganic. The inorganic (PIP) and organic (POP) fractions of the TPP loads represent 20–47% and 6–28% of the annual TP transport, respectively. In contrast, the particulate nitrogen loads (TPN) represent 8% or less of the annual total nitrogen (TN) loads and are predominately organic. For dissolved P transport, the dissolved inorganic fraction (DIP) is more important, representing 15–70% of the TP loads, whereas the dissolved organic fraction (DOP) represents only 3–9% of the TP loads. The TN loads are dominated by the dissolved component and more particularly the total oxidized fraction (TON), which is composed of nitrate and nitrite and represents 76–82% of the annual TN transport. The remaining dissolved N species, ammonium (NH₄-N) and organic N (DON) account for 0·3–1·2% and 13–16% of the annual TN transport, respectively. The TPN and TPP fluxes closely reflect the suspended sediment dynamics of the study basins, which are in turn controlled by basin size and morphology. The dissolved inorganic nutrient fluxes are influenced by point source inputs to the study basins, especially for P, although the TON flux is primarily influenced by diffuse source contributions and the hydrological connectivity between the river and its catchment area. The dissolved organic fractions are closely related to the dissolved organic carbon (DOC) dynamics, which are in turn influenced by land use and basin size. The magnitude of the NH₄-N fraction was dependent on the proximity of the monitoring station to point source discharges, because of rapid nitrification within the water column. However, during storm events, desorption from suspended sediment may be temporarily important. Both the magnitude and relative contribution of the different nutrient fractions exhibit significant seasonal variability in response to the hydrological regime, sediment mobilization, the degree of dilution of point source inputs and biological processes. © 1998 John Wiley & Sons, Ltd.     

Konzepte zur Mobilitätsabschätzung von Schadstoffen in Boden- und Abfallmaterialien

Concepts for the Evaluation of Contaminant Mobility in Soil and Waste Materials Elution tests (S4, pH_stat, and SDS test) are presented, enabling the evaluation of the mobility of hydrophilic/hydrophobic and inorganic/organic contaminants in soil and waste materials. While elution tests for estimation of the mobilization potential of hydrophilic substances are performed following the pH_stat method, for hydrophobic species surfactant-containing eluents are used. The individual parameters of the elution process are selected assuming a "worst-case" scenario. In principle, because of economic reasons, detailed analytical investigations should be preceded by relevant screening tests.     

Precise Relative Location of 25-ton Chemical Explosions at Balapan Using IMS Stations

—?We test how well low-magnitude (m _bLg 1.8 to 2.6), 25-ton chemical explosions at Balapan, Kazakhstan, can be located using IMS stations and standard earth models, relying on precisely determined relative arrival times of nearly similar, regional and teleseismic waveforms. Three 1997 Balapan explosions were recorded by a number of currently reporting and surrogate IMS stations. Three regional stations and two teleseismic arrays yielded consistent waveforms appropriate for relative picking. Master-event locations based on the AK135 model and ground-truth information from the first, shallowest and best-recorded explosion, fell under 1 km from known locations, for depths constrained to that of the master event. The resulting 90% confidence ellipses covered 12–13?km² and contained the true locations; however, results for depth constrained to true depth were slightly less satisf actory. From predictions based on ground truth, we found a P _g -coda phase at Makanchi, Kazakhstan to be misidentified and poorly modeled. After accounting for this, 90% ellipses shrank to 2–3?km² and true-depth mislocation vectors became more consistent with confidence-ellipse orientations. These results suggest that a high level of precision could be provided by a tripartite array of calibration shots in cases where models are poorly known. We hope that the successful relocation of these small Balapan shots will support the role of calibration explosions in verification monitoring and special event studies, including on-site inspection.