Particle recycling in volcanic plumes

We have developed a new theoretical model of an eruption column that accounts for the re-entrainment of particles as they fall out of the laterally spreading umbrella cloud. The model illustrates how the mass flux of particles in the plume may increase with height in the plume, by a factor as large as 2.5 because of this recycling. Three important consequences are that (1) the critical velocity required to generate a buoyant eruption column for a given mass flux increases, (2) the total height of rise of the column may decrease, and (3) we infer that in relatively wind-free environments, for eruption columns near the conditions for collapse, the recycling of particles may lead to an unsteady oscillating motion of the plume, which, in time, may lead to the formation of interleaved fall and flow deposits.     

Modelling Seismic Waves Around Underground Openings in Fractured Rock

—?The potential for large excavation-induced seismic events may be recognised, even if the timing of an event may be inherently unpredictable. In this case, modelling the wave propagation from a potential event could allow the dynamic motions around an excavation to be projected, and for areas of danger to be anticipated. However, the above and other potential applications require accurate models of wave interaction with the openings, as well as with the fractured rock which surrounds such excavations. This paper considers real recorded waveforms and how well these waveforms are modelled by explicit mechanical models of the source, the medium and the excavation. Models of experiments at three different scales of the problem are presented: small and large amplitude waveforms recorded around a deep-level mining tunnel in a synthetic rockburst experiment; waveforms from laboratory experiments of waves through plates of steel representing fractures; waveforms from active pulses in an acoustic emission experiment in a small volume of fractured rock at the surface of an underground excavation. The results show that elastic wave propagation around an excavation was a first approximation for small amplitude waves, but was less successful for modelling large amplitude waves and more fractured rock. Fractures in the models were represented explicitly with displacement discontinuities. Waveforms through known fracture geometries were particularly well-reproduced, and indicate the importance of fracture stiffness, the in situ stress state, and stress-dependence of the fractures in such models. Overall, the models are sufficiently successful at representing recorded behaviour, to be encouraging for the goal of representing accurate wave motions around excavations.     

Efficacy of Annual Bacteria Monitoring and Shock Chlorination in Wells Finished in a Floodplain Aquifer

Public health authorities generally recommend annual water-quality monitoring of rural water wells and shock chlorination if coliforms are detected. It is implicitly assumed that shock chlorination is effective in ridding most wells of bacteriological pathogens for months to years. Neither annual monitoring nor shock chlorination was effective in addressing coliform contamination of selected water wells in a small town developed on an alluvial aquifer where septic system effluents are impacting well water quality. Considerable temporal variation in total and fecal coliforms was observed in water wells monitored for a six-month period. Individual wells intermittently met and exceeded the drinking water criteria, indicating annual sampling was insufficient. Shock chlorination of three contaminated wells and their associated distribution systems proved ineffective because colonies apparently originated from outside the wells and reappeared over relatively short time periods (ranging from less than one week up to 21 weeks). The relatively fast and similar rate of recovery of total heterotrophic bacteria suggested they are related to biofilm formation in the wells and not to ground water contamination.     

"EFFECTS OF FLOW INTENSITY, OBSTACLE ALIGNMENT AND CROSS-SECTION GEOMETRY ON SCOUR AT BRIDGE ABUTMENTS" CARDOSO, A.H., SANTOS, J.S. and ROCA, M.

The authors present new measurements of maximum (equilibrium) local scour depth at bridge abutments, the new data being analysed in terms of the multiplying factors given in Melville (1992,1997) and Melville and Coleman (2000). The design method presented in these publications is referred to here as the University of Auckland (UoA) Method. The authors' data apply to the following factors:∏f (flow intensity), ∏θ (abutment alignment) and ∏g (approach channel geometry).     

Induced Microearthquake Patterns in Hydrocarbon and Geothermal Reservoirs: Six Case Studies

—?The injection or production of fluids can induce microseismic events in hydrocarbon and geothermal reservoirs. By deploying sensors downhole, data sets have been collected that consist of a few hundred to well over 10,000 induced events. We find that most induced events cluster into well-defined geometrical patterns. In many cases, we must apply high-precision, relative location techniques to observe these patterns. At three sedimentary sites, thin horizontal strands of activity are commonly found within the location patterns. We believe this reflects fracture containment between stratigraphic layers of differing mechanical properties or states of stress. At a massive carbonate and two crystalline sites, combinations of linear and planar features indicate networks of intersecting fractures and allow us to infer positions of aseismic fractures through their influence on the location patterns. In addition, the fine-scale seismicity patterns often evolve systematically with time. At sedimentary sites, migration of seismicity toward the injection point has been observed and may result from slip-induced stress along fractures that initially have little resolved shear. In such cases, triggering events may be critical to generate high levels of seismic activity. At one crystalline site, the early occurrence of linear features that traverse planes of activity indicate permeable zones and possible flow paths within fractures. We hope the continued development of microseismic techniques and refinement of conceptual models will further increase our understanding of fluid behavior and lead to improved resource management in fractured reservoirs.     

A New Model for Heat Flow in Extensional Basins: Estimating Radiogenic Heat Production

Radiogenic heat production (RHP) represents a significant fraction of surface heat flow, both on cratons and in sedimentary basins. RHP within continental crust—especially the upper crust—is high. RHP at any depth within the crust can be estimated as a function of crustal age. Mantle RHP, in contrast, is always low, contributing at most 1 to 2 mW/m² to total heat flow. Radiogenic heat from any noncrystalline basement that may be present also contributes to total heat flow. RHP from metamorphic rocks is similar to or slightly lower than that from their precursor sedimentary rocks. When extension of the lithosphere occurs—as for example during rifting—the radiogenic contribution of each layer of the lithosphere and noncrystalline basement diminishes in direct proportion to the degree of extension of that layer. Lithospheric RHP today is somewhat less than in the distant past, as a result of radioactive decay. In modeling, RHP can be varied through time by considering the half lives of uranium, thorium, and potassium, and the proportional contribution of each of those elements to total RHP from basement. RHP from sedimentary rocks ranges from low for most evaporites to high for some shales, especially those rich in organic matter. The contribution to total heat flow of radiogenic heat from sediments depends strongly on total sediment thickness, and thus differs through time as subsidence and basin filling occur. RHP can be high for thick clastic sections. RHP in sediments can be calculated using ordinary or spectral gamma-ray logs, or it can be estimated from the lithology.     

Groundwater regime and calculation of yield response in North China Plain: a case study of Luancheng County in Hebei Province

The groundwater table has been declining at a rate of 0.65 m/yr in Luancheng County since large scale groundwater extraction carried out in the 1960s. The drop of precipitation, substantial increase in agricultural output, variations of crop planting structure and construction of water conservancy projects in the headwater area all tie up with the decline of the groundwater table. On the basis of analyzing the hydrogeological conditions and the water resources utilization of Luancheng County, a three-dimensional groundwater flow model was developed to simulate the county’s groundwater flow through finite-difference method using Visual Modflow software. We divide the research field into four parts after analyzing the hydrogeological condition. Based on parameter calibration and adjustment using measured data, the hydraulic conductivity and specific yield were simulated. Using the calibrated model, we analyze the agricultural water saving potentiality and its influence on the groundwater. The results are as follows: (1) if we decrease the amount of water extracted by 0.14xl0⁸ m³, the average groundwater table of the five observation wells in December will rise by 0.33 m; (2) if we decrease the water by 0.29x 10⁸m³, the average groundwater table of the five observation wells in December will rise by 0.64 m; and (3) if we increase the water by 0.29 x 10⁸m³, the average groundwater table of the five observation wells in December will decline by 0.45 m. So we can draw a conclusion that controlling the agricultural water use is an important way to prevent the decline of groundwater table.     

Total N,total P and organic matters content in floodplain soils of Xianghai Nature Reserve

Soil sediment samples of 10 layers with a spacing of 10 cm each were collected in different floodplain zones adjacent to Huolin River in the Xianghai Nature Reserve, and contents of total N, total P and organic matters were analyzed. The results showed that contents of total N, total P and organic matters were generally decreasing with the increase of distance from sample locations to the river channel, and contents of the three items were generally higher in the upper soil layer than that in the lower soil layer. The content variations displayed how flooding functions influenced nutrient matter content variations in floodplain soils since the flood inundation frequencies of the sample locations varied. The correlation analysis displayed that there were remarkable relativities between total N, total P and organic matters within definite spatial distance from the Huolin River channel.     

Participatory selection process for indicators of rangeland condition in the Kalahari

To develop indicator–based management tools that can facilitate sustainable natural resource management by non–specialists, meaningful participation of stakeholders is essential. A participatory framework is proposed for the identification, evaluation and selection of rangeland condition indicators. This framework is applied to the assessment of rangeland degradation processes and sustainable natural resource management with pastoralists in the southern Kalahari, Botswana. Farmer knowledge focused on vegetation and livestock, with soil, wild animal and socio–economic indicators playing a lesser role. Most were indicators of current rangeland condition; however 'early warning' indicators were also identified by some key informants. This demonstrates that some local knowledge is process–based. Such knowledge could be used to improve indicator–based management tools and extension advice on the livelihood adaptations necessary to prevent or reduce ecological change, capable of threatening livelihood sustainability. There is evidence that social background influences indicator use. Communal farmers rely most heavily on vegetation and livestock indicators, whilst syndicate and land–owning pastoralists cite wild animal and soil–based indicators most frequently. These factors must be considered if indicator–based management tools are to meet the requirements of a diverse community.