Significance of vertical flux as a sink for surface water DMSP and as a source for the sediment surface in coastal zones of northern Europe

In April 1997 and 1998 the significance of sedimentation as a sink for epipelagic dimethylsulphoniopropionate (DMSP) production and as a source for marine sediments was reassessed using a newly designed sediment trap. The behaviour of the traps in immersion was monitored continuously and the collection efficiency was evaluated with ²³⁴Th measurements. Net DMS(P) fluxes were corrected for some physical and biological losses during the whole sedimentation process providing reliable estimates of gross DMSP fluxes. It is shown that daily losses by sedimentation account for between 0.1% and 16% of seawater particulate DMSP (DMSPp) standing stocks, and between 3% and 75% of daily DMSPp production. In the Malangen fjord we observed temporal increases of DMSP production and standing stocks which resulted also in increases of DMSP vertical fluxes and DMS(P) concentrations at the sediment surface. This result illustrates how tight the coupling can be between pelagos and benthos, and confirms that DMS(P) concentration in the sediment was a reliable diagnostic indicator of vertical export from overlying waters in Malangen fjord. In Ullsfjord, however, DMS(P) concentrations in the sediment were poorly indicators of Phaeocystis pouchetii export during the early stage of growth of a bloom. The high load of DMS(P) in Balsfjord's sediments could neither be attributed to local vertical sedimentation nor to short-term lateral advection of fresh DMSP-containing phytoplanktonic material, and provides indication that this tracer sometimes also can be misleading. The highest loads of DMS(P) in sediments and the fastest rates of sedimentation occurred in the Southern Bight of the North Sea.     

Th sorption and export models in the water column: A review

Over the past few decades, the radioisotope pair of ²³⁸U / ²³⁴Th has been widely and increasingly used to describe particle dynamics and particle export fluxes in a variety of aquatic systems. The present paper is one of five review articles dedicated to ²³⁴Th. It is focused on the models associated with ²³⁴Th whereas the companion papers (same issue) are focused on present and future methodologies and techniques (Rutgers van der Loeff et al.), C / ²³⁴Th ratios (Buesseler et al.), ²³⁴Th speciation (Santschi et al.) and present and future applications of ²³⁴Th [Waples, J.T., Benitez-Nelson, C.R., Savoye, N., Rutgers van der Loeff, M., Baskaran, M., Gustafsson, Ö., this issue. An Introduction to the application and future use of ²³⁴Th in aquatic systems. Marine Chemistry, FATE special issue]. In this paper, we review current ²³⁴Th scavenging models and discuss the relative importance of the non-steady state and physical terms associated with the most commonly used model to estimate ²³⁴Th flux. Based on this discussion we recommend that for future work the use of models should be accompanied by a discussion of the effect that model and data uncertainty have on the model results. We also suggest that future field work incorporate repeat occupations of sample sites on time scales of 1–4 weeks in order to evaluate steady state versus non-steady state estimates of ²³⁴Th export, especially during high flux events (> ca. 800 dpm m^− 2 d^− 1). Finally, knowledge of the physical oceanography of the study area is essential, particularly in ocean margins and in areas of established upwelling (e.g., Equatorial Pacific). These suggestions will greatly enhance the application of ²³⁴Th as a tracer of particle dynamics and flux in more complicated regimes.     

Spectral evolution of bursts of star formation superimposed on old populations

We simulate the occurrence of star formation bursts, during the past 3×10⁹ yr, superimposed on old populations, by combining visible and near-infrared integrated spectra of star clusters with those of red galaxy nuclei. We track the resultant spectral evolution of the composite object for burst to old population mass ratios of 10, 1, and 0.1%. If a star formation burst uses 10% of the galaxy mass, the underlying old population will be undetectable, at least by means of integrated spectra, during 5×10⁷ yr. At intermediate ages, 2×10⁹ yr, the burst will still contribute around 20% of the total optical flux. For a 1% mass, the burst becomes barely visible at intermediate ages; and, finally, for an 0.1% mass, the burst will affect the galaxy spectrum during 2×10⁷ yr only.     

The GeoForschungsZentrum Potsdam/Groupe de Recherche de Gèodésie Spatiale satellite-only and combined gravity field models: EIGEN-GL04S1 and EIGEN-GL04C

The recent improvements in the Gravity Recovery And Climate Experiment (GRACE) tracking data processing at GeoForschungsZentrum Potsdam (GFZ) and Groupe de Recherche de Géodésie Spatiale (GRGS) Toulouse, the availability of newer surface gravity data sets in the Arctic, Antarctica and North-America, and the availability of a new mean sea surface height model from altimetry processing at GFZ gave rise to the generation of two new global gravity field models. The first, EIGEN-GL04S1, a satellite-only model complete to degree and order 150 in terms of spherical harmonics, was derived by combination of the latest GFZ Potsdam GRACE-only (EIGEN-GRACE04S) and GRGS Toulouse GRACE/LAGEOS (EIGEN-GL04S) mean field solutions. The second, EIGEN-GL04S1 was combined with surface gravity data from altimetry over the oceans and gravimetry over the continents to derive a new high-resolution global gravity field model called EIGEN-GL04C. This model is complete to degree and order 360 and thus resolves geoid and gravity anomalies at half- wavelengths of 55 km at the equator. A degree-dependent combination method has been applied in order to preserve the high accuracy from the GRACE satellite data in the lower frequency band of the geopotential and to form a smooth transition to the high-frequency information coming from the surface data. Compared to pre-CHAMP global high-resolution models, the accuracy was improved at a spatial resolution of 200 km (half-wavelength) by one order of magnitude to 3 cm in terms of geoid heights. The accuracy of this model (i.e. the commission error) at its full spatial resolution is estimated to be 15 cm. The model shows a reduced artificial meridional striping and an increased correlation of EIGEN-GL04C-derived geostrophic meridional currents with World Ocean Atlas 2001 (WOA01) data. These improvements have led to select EIGEN-GL04C for JASON-1 satellite altimeter data reprocessing. Electronic Supplementary Material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Photometric investigation of the evolved contact binary system DN Aur

We present here the photometric light curve analyses of the eclipsing binary star DN Aur. The CCD photometry, performed at the Behlen observatory using the 0.76 m automated telescope gave 646 individual data points inV andR bandpass filters. From this data we have determined a new epoch and an orbital period of 0.6168891 days. The published spectral classification is F3.The Wilson-Devinney model was used to derive the photometric solutions. DN Aur is a W UMa type contact binary system. The mass ratio, (q=m ₂/m ₁0.210, where star 2 is eclipsed at the primary minimum) suggests that the system has A-type configuration. The computed light curve has a third light of about 22 percent and a total eclipse in the secondary minimum. A solution with a cool spot on the secondary component is also found. We recommend spectroscopic study of DN Aur even though the light curve analysis show it to be a single line spectroscopic system. Generally contact systems of spectral type F3 have periods ranging from 0.25 to 0.5 days. The longer period of DN Aur suggests that it is an evolved contact system with case A mass transfer.     

The solubility of [4H]Si defects in α-quartz and their role in the formation of molecular water and related weakening on heating

The nature of the solubility of water as [4H]_Si defects in quartz, and their role in providing a source of molecular water on heating, is investigated. Existing ab inito energy calculations on the incorporation of water in quartz are used to show that energetically 4H for Si substitution is likely to constitute the most prevalent mode of water uptake on the atomic scale in quartz under equilibrium conditions, and that the planar defects previously observed by a number of different authors by electron microscopy in wet quartz are likely to be planar rafts of aggregated [4H]_Si defects which are formed on supersaturation. These new conclusions call into question the previous identification of the planar defects as high pressure water clusters and require that their role in the production of molecular water in the context of recent theories of hydrolytic weakening be re-assessed. Accordingly the existing ab initio results have been used to establish the characteristics of the phase diagram for the system quartz-water in the temperature and pressure range of interest in hydrolytic weakening. Additional electron-optical experiments on wet quartz show that, on annealing at temperature in the electron microscope, similar planar defects develop in wet quartz by a diffusion process. In the context of existing theories of hydrolytic weakening it is now proposed that the conversion of [4H]_Si defects to molecular water, where this is dictated by the equilibrium phase diagram, leads to a relatively large increase in volume and to the appearance of the bubbles of free water and the nucleation of associated prismatic dislocation loops of Burgers vector b=1/3 a $\langle 11\bar 20\rangle $ as previously observed. Ultimately the development of these loops leads to dislocation-induced plasticity.     

The main problem of lunar theory solved by the method of Brown

Brown's method for solving the main problem of lunar theory has been adapted for the computation by machine with the help of an algebraic processor. Brown's results are first recovered and refined. The solution is then expanded to include most terms of order nine. The terms in the series for the longitude and latitude are listed with an accuracy of 0.000 01 and of 0.000 001 for the parallax.This research was supported in parts by the National Science Foundation grant MCS 78-01425.