Monitoring of atmospheric deposition in European forests and an overview on its implication on forest condition

Forest conditions in Europe have been monitored over 20 years jointly by the International Cooperative Programme on Assessment and Monitoring of Air Pollution Effects on Forests (ICP Forests) and the European Union (EU). Maps for mean bulk SO₄, NO₃ and NH₄ deposition at around 400 intensive monitoring plots in the years 1999–2001, as well as time trends for the period 1996–2001, are presented. Mean bulk SO₄ deposition at 169 plots mostly located in central Europe decreased from 7.4 to 5.8 kgS ha⁻¹ a⁻¹. Mean NH₄ bulk deposition decreased from 6.2 to 5.3 kgN ha⁻¹ a⁻¹. Nitrate bulk deposition fluctuated around 5 kgN ha⁻¹ a⁻¹. On average, throughfall deposition was considerably higher than bulk deposition. Time trends for mean tree crown defoliation as an overall indicator for forest condition show a peak in the mid 1990s for most of the monitored main tree species and a recent increase for the years 2003 and 2004. Multivariate linear regression analyses show some significant relations between deposition and defoliation. These relations depend on the tree species and site characteristics. Effects of deposition are moderated by the influence of biotic stress factors such as insects and fungi and by abiotic stress factors, such as weather.     

Eine pleistozäne Rutschung bei Kitzbühel/Tirol

ZusammenfassungEine pleistozäne Rutschung bei Kitzbühel/Tirol Bei einem Grabenaushub wurden in Grundmoräne zwei fossile Rutschkörper festgestellt. Ein Beispiel wird anhand von alten Bewegungsstrukturen beschrieben, die durch Oxydationsstreifen abgebildet wurden. Nach dem Geländeschnitt rissen z. T. die alten Schwächestellen infolge geringer Abweichungen der Scherfestigkeit des Materials wieder auf.

---

SummaryA Pleistocene Landslide near Kitzbühel/Tyrol During excavation of a ditch two fossil landslides have been ascertained. One example is described the structures of which are copied by oxide bands. After excavating the old joints have opened again.

---

RésuméUn glissement pléistocène près de Kitzbühel/Tyrol Pendant l'excavation d'un fossé deux glissements fossiles étaient constatés dans la moraine. Un glissement est décrit dont les structures sont illustrées par bandes d'oxydes. Les observations ont demontré que les fissures vieilles se sont ouvertes après l'excavation.

---

---

Mit 1 Abbildung     

Younger Dryas to mid-Holocene environmental history of the lowlands of NW Transylvania, Romania

Pollen, micro-charcoal and total carbon analyses on sediments from the Turbuta palaeolake, in the Transylvanian Basin of NW Romania, reveal Younger Dryas to mid-Holocene environmental changes. The chronostratigraphy relies on AMS ¹⁴C measurements on organic matter and U/Th TIMS datings of snail shells. Results indicate the presence of Pinus and Betula open woodlands with small populations of Picea, Ulmus, Alnus and Salix before 12,000 cal yr BP. A fairly abrupt replacement of Pinus and Betula by Ulmus-dominated woodlands at ca. 11,900 cal. yr BP likely represents competition effects of vegetation driven by climate warming at the onset of the Holocene. By 11,000 cal yr BP, the woodlands were increasingly diverse and dense with the expansion of Quercus, Fraxinus and Tilia, the establishment of Corylus and the decline of upland herbaceous and shrubs taxa. The marked expansion of Quercus accompanied by Tilia between 10,500 and 8000 cal yr BP could be the result of low effective moisture associated with both low elevation of the site and with regional change towards a drier climate. At 10,000 cal yr BP, Corylus spread across the region, and by 8000 cal yr BP it replaced Quercus as a dominant forest constituent, with only little representation of Picea abies. Carpinus became established around 5500 cal yr BP, but it was only a minor constituent in local woodlands until ca. 5000 cal yr BP. Results from this study also indicate that the woodlands in the lowlands of Turbuta were never closed.     

Paleoenvironmental evolution of the Paratethys in the Slovenian Basin during the Late Paleogene

Several sections from the uppermost Eocene and Oligocene of northern Slovenia have been investigated with respect to sedimentary facies, foraminiferal assemblages, stable isotopes, carbonate microfacies, and palynology. The main objective was to reconstruct the paleoenvironmental history of the Paleogene Paratethys in this region of the eastern Alpine realm. The sediments exhibit a transgressive succession beginning with conglomerates, sandstones, and mudstones of fluvial and lacustrine origin followed by carbonates and muddy marls indicating marine conditions. The foraminiferal faunal changes from brackish to shallow marine to deeper marine assemblages and the distribution of the palynofloras corroborate the sedimentological results. Microfacies analysis of the limestones shows a wide variation of shallow water, generally mud-rich facies dominated by coralline algae, foraminifera, and corals. Microfaunas adapted to low-oxygen conditions indicate temporal sluggish bottom-water circulation which can be associated with high fresh-water fluxes. These results are discussed as reflecting both the global sea-level rise during the Early Oligocene and the regional tectonic and climatic evolution.     

Towards the establishment of a reliable proxy for the reactive surface area of smectite

Reactive surface area is one of the key parameters for studying the kinetics of mineral dissolution. The common practice in experimental kinetics is to normalize the dissolution rate to the surface area measured by the BET method. The relationship between BET surface area and the reactive surface area is not trivial in minerals such as smectites, which possess both internal and external surface areas, and in which the dissolution is controlled by the chemical attack on the edge surface. The present study examines two proxies for the reactive surface area of the Clay Mineral Society reference smectite SAz-1: BET surface area and the edge surface area measured using AFM.Since smectites are very microporous, their BET surface area is strongly influenced by the degassing procedure. It is demonstrated that outgassing the smectite powder at 135°C in a 15 mL min⁻¹ N₂ gas flow for at least 24 hours minimizes contribution from micropores to less than 11% of the BET surface area.Following dissolution experiments in solutions with a low electrolyte concentration, the BET surface area increased from 34 ± 2 m² g⁻¹ in raw SAz-1 to 127 ± 13 m² g⁻¹ in SAz-1 sample recovered from dissolution experiments. This increase in BET surface area is explained by a decrease in the average size of the smectite aggregates, and by an increase in microporosity due to the depletion in the major interlayer cation, i.e., Ca²⁺. As the BET surface area of the raw smectite sample includes considerably less microporosity compared to the BET surface area of the smectite recovered from dissolution experiments, the former is a better approximation of the external surface area of the dried sample powder.AFM measurements show that there is no correlation between the specific external surface area of the sample and its specific edge surface area. This observation is explained by the platy morphology of the smectite particle in which the specific external surface area depends linearly on the height reciprocal, whereas the specific edge surface area is independent of the particles height and depends linearly on the sum of the reciprocals of the length of the axes. Therefore, there is no reason to expect a correlation between the BET and the edge surface area. Our results show that the edge surface area (4.9 ± 0.7 m² g⁻¹) of the smectite particles cannot be predicted based on its external surface area (136 ± 20 m² g⁻¹). Therefore, the BET surface area cannot serve as a proxy for the reactive surface area. We suggest using AFM measurements of the specific edge surface area as an alternative proxy for the reactive surface area of smectite.     

Climate impact of high northern vegetation: Late Miocene and present

The Late Miocene belongs to the late phase of the Cenozoic. Climate at that time was still warmer and more humid as compared to today, especially in the high latitudes. Corresponding to the climate situation, palaeobotanical evidences support that vegetation in the high northern latitudes changed significantly from the Late Miocene until today. To quantify the climate impact of this vegetation change, we analyse how vegetation in the high northern latitudes contribute to climate evolution. For that, we perform climate modelling sensitivity experiments for the present and for the Late Miocene (Tortonian, 11–7 Ma). For our present-day sensitivity experiment, we introduce the Tortonian vegetation in the high northern latitudes. For our Tortonian sensitivity experiment, we introduce the modern vegetation on the same grid cells. In the Tortonian and in the present, the modern vegetation leads to a strong cooling of the northern extratropics (up to −4°C). Nevertheless, the meridional heat transports remain nearly unchanged in both cases. In general, the vegetation impact on climate is similar in the Tortonian and in the present. However, some exceptions occur. Due to the Tethys Ocean in the Tortonian, temperatures decline only weakly in eastern Europe and western Asia. In the Tortonian climate, temperatures on the Sahara realm rise (up to +1.5°C), while the temperatures do not change remarkably in the present-day climate. This different behaviour is caused by a stronger and more sensitive hydrological cycle on the Sahara region during the Tortonian.     

Reconstructing palaeotemperatures for the Early and Middle Pleistocene using the mutual climatic range method based on plant fossils

A new approach is proposed to obtain quantitative temperature reconstructions from Early and Middle Pleistocene pollen and megafloral records. Utilizing the indicator species concept pioneered by Iversen (1944, Geologiska Föreningen Förhandlingar Stockholm 66, 463–483), the new methodology overcomes the problem of non-analogue plant communities by only taking into account the presence/absence of taxa rather than their relative abundances. Based on the present day thermal tolerances of the taxa from a fossil assemblage, the temperature interval in which all taxa from this assemblage can coexist is determined. A databank containing the climate tolerances of 85 taxa from European pollen records was established. To increase the temperature resolution of the method, procedures were developed to assess the most likely intervals for the actual temperatures within the calculated common thermospheres and the routine evaluation of the mean temperatures of the warmest and coldest months (MTW and MTC). After calibrating the approach on modern assemblages, it was applied to Tiglian and Holsteinian pollen sequences from Lieth (northern Germany) and Lac du Bourget (northern French Alps). For both records the method yields detailed temperature reconstructions of temperate and cold episodes. During the coldest episode of the Lieth section, the MTC may have been as low as −16°C. Corresponding MTW values range from 14.5 to 21°C, thus testifying to a strong continentality at that time. During the warmest period reconstructed for the Lieth section, the MTC was similar to the value as measured in the area today (1.5°C), whereas the MTW was probably higher than at present (20.1°C). For the coldest interval from the Lac du Bourget pollen sequence, the reconstructed MTC values reach a minimum of −15°C. Corresponding MTW values range from 15 to 22°C, again implying a strong continentality. For the warmest period our approach yields MTC values between −2 and 2°C and MTW values between 16.5 and 22°C. For both records, the resolution for the MTW and MTC reaches 1.5 and 2.5°C, respectively.     

Plate and intraplate processes of Hercynian Europe during the late paleozoic

It is speculated that until Late Carboniferous time the region of Hercynian Europe was occupied by an elongated island arc system underlain by a segment of continental crust. In the Upper Carboniferous, two subduction zones are assumed to have extended from the north and south beneath Hercynian Europe. An extensive zone of hot, partially molten upper mantle lay above and between these, and diapiric uprise of portions of this material led to separation of mafic magmas, widespread partial melting in the lower and middle crust, high temperature-low pressure metamorphism in crustal rocks, and regional uplift and extension of the crust, as indicated by intermontane troughs and their associated volcanic rocks.In Visean to Westphalian time Hercynian Europe collided with both the large neighbouring plates North America-Europe and Africa. During these diachronous collisions and owing to reduced rigidity of the relatively hot island arc crust, the irregular continental margins of the larger and thicker continental plates induced oroclinal bending of Hercynian Europe. After the collision processes had been terminated, processes of upper mantle activity continued, causing further crustal uplift and even, enhanced crustal extension for several tens of million years into the Lower Permian. Decline of the upper mantle activity beneath Hercynian Europe is indicated by crustal subsidence and formation of a peneplain in Permian time followed by the Upper Permian transgression of both the Zechstein sea and the Tethys sea which mark the end of the Hercynian geodynamic cycle.     

Geochemistry of Neogene quartz andesites from the Oaş and Gutâi Mountains,Eastern Carpathians (Romania): a complex magma genesis

The Neogene quartz andesites from the Oa? and Gutâi Mountains (Romania) are mid-K calc-alkaline rocks and contain plagioclase-orthopyroxene-clinopyroxene-amphibole-magnetite phenocrysts as well as quartz crystals. They are associated with a volcanic sequence ranging from basalts and basaltic andesites to dacites and rhyolites, but form a separate magma group, mostly in respect to the trace elements. Based on the geochemical data combined with inferences from complex zoning patterns in plagioclase and pyroxene, the evolution of quartz andesites is interpreted in terms of fractional crystallization, AFC and magma mixing. A parental magma deriving from a MORB- or OIB-type source modified by fluids and melts originating from sediments is envisaged.     

Stress induced time dependent behavior of clayey soils

It is shown that time compression curve obtained from one-dimensional consolidation curve in the laboratory may include six phases. These are initial compression, first primary compression, transition from first primary compression to second primary compression, second primary compression, and transition from second primary compression to creep and lastly creep. This paper attempts to identify the quantitative beginnings and characteristics of these phases. A mathematical characteristic of all the soils that follow primary consolidation as per Terzaghi’s one dimensional consolidation theory is derived. It is known as the constant of primary consolidation. It is used to study the beginning of secondary consolidation and its effects on primary consolidation. Another characteristic of soils for creep and total absence of primary compression is derived. Methods are suggested for the determination of coefficients of Primary and Secondary consolidations and the compression index.