Do river deltas in east India retreat? A case of the Krishna Delta

The construction of multiple dams and barrages in many Indian River basins over the last few decades significantly reduced river flow to the sea and affected the sediment regime. More reservoir construction is planned through the proposed National River Linking Project (NRLP), which will transfer massive amounts of water from the North to the South of India. The impacts of these developments on fertile and ecologically sensitive deltaic environments are poorly understood and quantified at present. In this paper an attempt is made to identify, locate and quantify coastal erosion and deposition processes in one of the major river basins in India—the Krishna—using a time series of Landsat images for 1977, 1990 and 2001 with a spatial resolution ranging from 57.0 m to 28.5 m. The dynamics of these processes are analyzed together with the time series of river flow, sediment discharge and sediment storage in the basin. Comparisons are made with similar processes identified and quantified earlier in the delta of a neighboring similarly large river basin—the Godavari. The results suggest that coastal erosion in the Krishna Delta progressed over the last 25 years at the average rate of 77.6 ha yr^− 1, dominating the entire delta coastline and exceeding the deposition rate threefold. The retreat of the Krishna Delta may be explained primarily by the reduced river inflow to the delta (which is three times less at present than 50 years ago) and the associated reduction of sediment load. Both are invariably related to upstream reservoir storage development.     

Early bronze in two Holocene archaeological sites in Gansu, NW China

Understanding of the origin and development of bronze technology in eastern Asia remains unresolved. Here we report on the distribution of copper and associated cations in sediments from Huoshiliang in northwestern Gansu, China, strontium and lead isotope analyses of ore and slag samples, and some artifact fragments at archaeological sites at Ganggangwa and Huoshiliang in the Black River valley.We conclude that bronze production began perhaps as early as 2135 BC and that the Baishantang modern mine site at Dingxin was a possible source of copper ore. There was at least one other, but currently unidentified, source of ore. The Bronze Age people were also farmers and planted cereals such as wheat, and they may have abandoned the region when wood was exhausted and desertification took over.     

Diamondiferous eclogites from Yakutia,Siberia: evidence for a diversity of protoliths

Major-element and REE compositions of 14 diamondiferous eclogites from the Udachnaya kimberlite in Yakutia, Siberia have been determined by electron microprobe and secondary ion mass spectrometer (SIMS). Based on previous clinopyroxene classification schemes (e.g., Taylor and Neal 1989), all of these eclogite xenoliths belong to Group B/C, although some of the garnet compositions and mineral REE abundances are inconsistent with the indicated groups. This demonstrates the inadequacy of the classification scheme based on African eclogites for application to Siberian samples. Because of the coarse grain size of the Udachnaya nodules, meaningful modal abundances could not be obtained. However, reconstructed REE compositions using various garnet: clinopyroxene ratios demonstrate relative insensitivity to changes in mode for common eclogitic assemblages. Many of these reconstructed REE compositions show LREE depletions. Some depletions are consistent with an origin (either directly or through partial melting) as normal or Type-I ocean floor basalt. Others, however, require material of eclogitic or pyroxenitic affinities to undergo partial melting; this facilitates the depletion of LREE while leaving the HREE at nearly original levels. Many of the eclogites of South Africa are consistent with a protolith of anomalous or Type II ocean floor basalt. This fundamental difference between the two regions is the likely cause of the inconsistencies with the chemicallybased classification.     

Fast-changing processes in a medium subject to loading as detected by resistivity measurements

Making measurements of electric resistivity at 16 s intervals, the authors noticed fast changes of this parameter prior to the occurrence of the main fracture. The changes are superposed on bay pulsations of increasing amplitude and decreasing period. This finding opens prospects for a wider use of an electric resistivity method and proves the high quality of automatic instruments, in particular their high resolution. It also gives evidence for the occurrence of short-period precursors in the fracture zone while the main fracture is being formed.     

P‐wave stacking‐velocity tomography for VTI media

A major complication caused by anisotropy in velocity analysis and imaging is the uncertainty in estimating the vertical velocity and depth scale of the model from surface data. For laterally homogeneous VTI (transversely isotropic with a vertical symmetry axis) media above the target reflector, P‐wave moveout has to be combined with other information (e.g. borehole data or converted waves) to build velocity models for depth imaging. The presence of lateral heterogeneity in the overburden creates the dependence of P‐wave reflection data on all three relevant parameters (the vertical velocity V_P0 and the Thomsen coefficients ε and δ) and, therefore, may help to determine the depth scale of the velocity field. Here, we propose a tomographic algorithm designed to invert NMO ellipses (obtained from azimuthally varying stacking velocities) and zero‐offset traveltimes of P‐waves for the parameters of homogeneous VTI layers separated by either plane dipping or curved interfaces. For plane non‐intersecting layer boundaries, the interval parameters cannot be recovered from P‐wave moveout in a unique way. Nonetheless, if the reflectors have sufficiently different azimuths, a priori knowledge of any single interval parameter makes it possible to reconstruct the whole model in depth. For example, the parameter estimation becomes unique if the subsurface layer is known to be isotropic. In the case of 2D inversion on the dip line of co‐orientated reflectors, it is necessary to specify one parameter (e.g. the vertical velocity) per layer. Despite the higher complexity of models with curved interfaces, the increased angle coverage of reflected rays helps to resolve the trade‐offs between the medium parameters. Singular value decomposition (SVD) shows that in the presence of sufficient interface curvature all parameters needed for anisotropic depth processing can be obtained solely from conventional‐spread P‐wave moveout. By performing tests on noise‐contaminated data we demonstrate that the tomographic inversion procedure reconstructs both the interfaces and the VTI parameters with high accuracy. Both SVD analysis and moveout inversion are implemented using an efficient modelling technique based on the theory of NMO‐velocity surfaces generalized for wave propagation through curved interfaces.     

Analysis of Thomsen parameters for finely layered VTI media

Since the work of Postma and Backus, much has been learned about elastic constants in vertical transversely isotropic (VTI) media when the anisotropy is due to fine layering of isotropic elastic materials. Nevertheless, there has continued to be some uncertainty about the possible range of Thomsen's anisotropy parameters ε and δ for such media. We use both Monte Carlo studies and detailed analysis of Backus' equations for both two- and three-component layered media to establish the results presented. We show that ε lies in the range ?3/8 ε ½[〈v²_p〉〈v^?2_p〉?1], for finely layered media; smaller positive and all negative values of ε occur for media with large fluctuations in the Lamé parameter λ in the component layers. We show that δ can also be either positive or negative, and that for constant density media, sign (δ) = sign (〈v^?2_p〉 ? 〈v^?2_s〉〈v²_s/v²_p〉). Monte Carlo simulations show that among all theoretically possible random media, positive and negative δ are equally likely in finely layered media. (Of course, the δs associated with real earth materials may span some smaller subset of those that are theoretically possible, but answering this important question is beyond our present scope.) Layered media having large fluctuations in λ are those most likely to have positive δ. This is somewhat surprising since ε is often negative or a small positive number for such media, and we have the general constraint that ε ? δ > 0 for layered VTI media. Since Gassmann's results for fluid-saturated porous media show that the mechanical effects of fluids influence only the Lamé parameter λ, not the shear modulus μ, these results suggest that small positive δ occurring together with small positive ε (but somewhat larger than δ) may be indicative of changing fluid content in a layered earth.     

Impact of waves on the sea drag: measurements in the Baltic sea and a model interpretation

Measurements from the Baltic Sea and a wind-over-wave coupled model are used to study the wave impact on the sea drag. The study has been carried out for different wave conditions, namely a pure wind-sea, following-swell/ mixed sea and cross-swell/ mixed sea. Measurements reveal the fact that the sea drag is dependent on the sea-state. In stationary conditions and in the absence of severe cross-swell, swell reduces drag compared to wind-sea at the same wind speed. The cross-swell enhances the drag as compared to the following-swell case and the magnitude of the drag coefficient is increased with increasing the angle of swell propagation to the wind. It is shown that the agreement between the model results and measurements is good for pure wind-sea and stationary mixed-sea cases. Discrepancies occur at light winds, where most of the data represent pure swell conditions. During these pure swell conditions the data are characterized by a large variation of the drag coefficient. The variation is caused by mesoscale variability in the stress co-spectra, wind-cross-swell effects and nonstationarity in the wave and wind fields not represented in the model.     

Bianchi-II Rotating World

Dynamical and kinematic properties of Bianchi-II cosmological models with rotation and expansion are investigated. Exact solutions of Einstein field equations are obtained which describe the evolution of a rotating Universe. Exact solutions of null, timelike and spacelike geodesics are constructed. Two new cosmological tests for rotating universes are discussed: cosmological lens effect and cosmological mirror effect.