High cadmium concentrations in Jurassic limestone as the cause for elevated cadmium levels in deriving soils: a case study in Lower Burgundy,France

Cadmium (Cd) is a highly toxic element and its presence in the environment needs to be closely monitored. Recent systematic surveys in French soils have revealed the existence of areas in eastern and central France, which show systematically high cadmium concentrations. It has been suggested that at least part of these anomalous levels are of natural origin. For the Lower Burgundy area in particular, a direct heritage from the Jurassic limestone bedrock is highly suspected. This potential relationship has been studied in several localities around Avallon and this study reports new evidence for a direct link between anomalously elevated cadmium contents of Bajocian and Oxfordian limestone and high cadmium concentrations in deriving soils. Soils in this area show cadmium concentrations generally above the average national population values, with contents frequently higher than the ‘upper whisker’ value of 0.8 μg g⁻¹ determined by statistical evaluation. In parallel, limestone rocks studied in the same area exhibit cadmium concentrations frequently exceeding the mean value of 0.030–0.065 μg g⁻¹ previously given for similar rocks by one order of magnitude, with a maximum of 2.6 μg g⁻¹. Mean ratios between the cadmium concentrations of limestone bedrock and deriving soils (Cd_soil/Cd_rock), calculated for different areas, range from 4.6 to 5.7. Calculations based on the analyses of both soils from a restricted area and fragments of bedrock sampled in the immediate vicinity of high-concentration soils are around 5.5–5.7. Cd_soil/Cd_rock is useful in determining the potential of soils in Lower Burgundy to reflect and exacerbate the high concentrations of cadmium present in parent bedrocks.     

A TEM study of four particles extracted from the Stardust track 80

Abstract— Four particles extracted from track 80 at different penetration depths have been studied by analytical transmission electron microscopy (ATEM). Regardless of their positions within the track, the samples present a comparable microstructure made of a silica rich glassy matrix embedding a large number of small Fe‐Ni‐S inclusions and vesicles. This microstructure is typical of strongly thermally modified particles that were heated and melted during the hypervelocity impact into the aerogel. X‐ray intensity maps show that the particles were made of Mg‐rich silicates (typically 200 nm in diameter) cemented by a fine‐grained matrix enriched in iron sulfide. Bulk compositions of the four particles suggest that the captured dust particle was an aggregate of grains with various iron sulfide fraction and that no extending chemical mixing in the bulb occurred during the deceleration. The bulk S/Fe ratios of the four samples are close to CI and far from the chondritic meteorites from the asteroidal belt, suggesting that the studied particles are compatible with chondritic‐porous interplanetary dust particles or with material coming from a large heliocentric distance for escaping the S depletion.     

A two‐step process for the reflooding of the Mediterranean after the Messinian Salinity Crisis

The Messinian Salinity Crisis is well known to have resulted from a significant drop of the Mediterranean sea level. Considering both onshore and offshore observations, the subsequent reflooding is generally thought to have been very sudden. We present here offshore seismic evidence from the Gulf of Lions and re‐visited onshore data from Italy and Turkey that lead to a new concept of a two‐step reflooding of the Mediterranean Basin after the Messinian Salinity Crisis. The refilling was first moderate and relatively slow accompanied by transgressive ravinement, and later on very rapid, preserving the subaerial Messinian Erosional Surface. The amplitude of these two successive rises of sea level has been estimated at ≤500 m for the first rise and 600–900 m for the second rise. Evaporites from the central Mediterranean basins appear to have been deposited principally at the beginning of the first step of reflooding. After the second step, which preceeded the Zanclean Global Stratotype Section and Point, successive connections with the Paratethyan Dacic Basin, then the Adriatic foredeep, and finally the Euxinian Basin occurred, as a consequence of the continued global rise in sea level. A complex morphology with sills and sub‐basins led to diachronous events such as the so‐called ‘Lago Mare’.This study helps to distinguish events that were synchronous over the entire Mediterranean realm, such as the two‐step reflooding, from those that were more local and diachronous. In addition, the shoreline that marks the transition between these two steps of reflooding in the Provence Basin provides a remarkable palaeogeographical marker for subsidence studies.     

The drainage of Lake Ojibway in glaciolacustrine sediments of northern Ontario and Quebec,Canada

Physical evidence for the drainage of glacial lakes remains relatively rare in depositional records, giving rise to much debate on the location of outlets and discharge pathways, as well as on the climate impact of the attendant meltwater forcing. Lake Ojibway developed following the withdrawal of the Laurentide Ice Sheet in northern Ontario and Quebec, Canada. The late‐stage evolution of this large ice‐dammed lake was influenced by the complex dynamics of the retreating ice margin, which highly complicates the identification of the termination of Lake Ojibway in glaciolacustrine sediment records. Here, we document the composition of sections of rhythmites that contain in their upper part an anomalously thick and whitish bed (10–15 cm) that is in turn overlain by ～1 m of faintly bedded rhythmites. Grain‐size analyses showed that the thick whitish bed consists primarily of fine to coarse silt (2–63 μm), contrasting with the lower and upper rhythmites that are largely dominated by clay (<2 μm). The detrital carbonate content of the thick silt bed is characterized by consistently high values (2.5 to 2.8%), whereas the bounding rhythmites show lower and highly variable values. Oxygen isotope measurements further show a marked change going from typical glacial meltwater values (～ ?29.6 to ?27.7‰; VSMOW) for the lower rhythmites and the silt bed to modern‐like meteoric values (?18.4 to ?14.6‰) for the uppermost rhythmites. These data suggest that this marker bed may be associated with a major drawdown event that possibly corresponds to the final drainage of Lake Ojibway. AMS radiocarbon dating of ostracods extracted from the drainage bed also documents an important hardwater effect within the Ojibway basin.     

Sedimentary markers in the Provençal Basin (western Mediterranean): a window into deep geodynamic processes

Deep Earth dynamics impact so strongly on surface geological processes that we can use sediment palaeo‐markers as a window into the deeper Earth. Derived from climatic and tectonic erosive actions on the continents, and related to eustasy, subsidence and isostasy, the sediment in a deep basin is the main recorder of these processes. Nevertheless, defining and quantifying the relative roles of parameters that interact to give the final sedimentary architecture is not a simple task. Using a 3D‐grid of seismic and wide‐angle data, boreholes and numerical stratigraphic modelling, we propose here a quantification of post‐rift vertical movements in the Provençal Basin (West Mediterranean) involving three domains of subsidence: seaward tilting on the platform and the slope and purely vertical subsidence in the deep basin. These domains fit the deeper crustal domains highlighted by previous geophysical data. Post‐break‐up sedimentary markers may therefore be used to identify the initial hinge lines of the rifting phase and the subsidence laws.     

The Minorca Basin: a buffer zone between the Valencia and Liguro‐Provençal Basins (NW Mediterranean Sea)

Detailed analyses of seismic profiles and boreholes in the Valencia Basin (VB) reveal a differentiated basin, the Minorca Basin (MB), lying between the old Mesozoic Valencia Basin sensu strico (VBss) and the young Oligocene Liguro‐Provençal Basin (LPB). The relationship between these basins is shown through the correlation of four Miocene‐to‐present‐day megasequences. The Central and North Balearic Fracture Zones (CFZ and NBFZ) that border the MB represent two morphological and geodynamical thresholds that created an accommodation in steps between the three domains. Little to no horizontal Neogene movements are found for the Ibiza and Majorca Islands. In contrast, the counterclockwise movement of the Corso‐Sardinian blocks induced a counterclockwise movement of the Minorca block towards the SE along the CFZ and NBFZ, during the exhumation of lower continental crust in the LPB. This new understanding implies pure Neogene vertical subsidence in the VBss and places the AlKaPeCa northeastward of the present‐day Alboran Area.     

Interest of quality-based policies for Integrated Coastal Zone Management implementation: Lessons learnt from a French case study

This article shows how quality-based policies can support the effective implementation of Integrated Coastal Zone Management. It is based upon the analysis of the trial that is currently being conducted by the Marennes Oléron District on the Atlantic coast of France through the implementation of the Oléron Coastal Quality Action Plan. The author emphasizes three main aspects. At first, she exposes the general process that supported the emergence of the ICZM project of this district, highlighting the major role of early public participation, territorial planning and the design of operational action plans. She demonstrates that the implementation of coastal quality action plans can follow the integration building process of the ICZM iterative cycle, and thus support ICZM implementation. Then, she highlights the major role of science/management integration in the implementation of quality-based policies, showing in which way scientists can provide useful knowledge to practitioners at various stages of the decision-making process and contribute both to the development of public participation and success of these policies. At last, the author presents and discusses the lessons learnt from the follow up and analysis of the implementation of this action plan. She emphasizes its strengths and weaknesses by putting it into the perspective of other French ICZM projects, and shows in which way the resolution of the problems faced by stakeholders in it realization contributes to the strengthening of their management capacity. The main benefits of this process for a quality-based policy are outlined.     

Weathering features in shocked quartz from the Ries impact crater,Germany

Abstract— Shocked quartz from the ejecta of the Ries impact structure has been investigated by analytical transmission electron microscopy (ATEM). Quartz grains display numerous planar fractures (PFs) and planar deformation features (PDFs). Both are partly or fully replaced by a mineral of the kaolinite group (likely halloysite). Its formation involves fluid circulation into the dense fracture networks, dissolution and removal of the amorphous phase initially present in PDFs, and finally, precipitation and crystallization of the kaolinite group mineral from solutions resulting from the chemical alteration of adjacent minerals (feldspars and biotite). Kaolinite group minerals are typical of hydrothermal alteration at low temperature, in humid climate, and under moderately acid conditions and, thus, this alteration may not be directly related to the impact event itself. However, the weathering features were strongly enhanced by the shock‐generated microstructure, in particular by fractures that provided pathways for fluid circulation.     

Pyroxene microstructure in the Northwest Africa 856 martian meteorite

Abstract— Transmission electron microscopy was used to examine pyroxene microstructure in the Northwest Africa (NWA) 856 martian meteorite to construct its cooling and shock histories. All pyroxenes contain strained coherent pigeonite/augite exsolution lamellae on (001). The average width and periodicity of lamellae are 80 and 400 nm, respectively, indicating a cooling rate below 0.1 °C/hr for the parent rock. Pigeonite and augite are topotactic, with strained coherent interfaces parallel to (001). The closure temperature for Ca‐Fe, Mg interdiffusion, estimated from the composition at the augite pigeonite interface, is about 700 °C. Tweed texture in augite reveals that a spinodal decomposition occurred. Locally, tweed evolved toward secondary pigeonite exsolutions on (001). Due to the decreasing diffusion rate with decreasing temperature, “M‐shaped” concentration profiles developed in augite lamellae. Pigeonite contains antiphase boundaries resulting from the C2/c to P2₁/c space group transition that occurred during cooling. The reconstructive phase transition from P2₁/c clinopyroxene to orthopyroxene did not occur. The deformation (shock) history of the meteorites is revealed by the presence of dislocations and mechanical twins. Dislocations are found in glide configuration, with the [001](100) glide system preferentially activated. They exhibit strong interaction with the strained augite/pigeonite interfaces and did not propagate over large distances. Twins are found to be almost all parallel to (100) and show moderate interaction with the augite/pigeonite interfaces. These twins are responsible for the plastic deformation of the pyroxene grains. Comparison with microstructure of shocked clinopyroxene (experimentally or naturally shocked) suggests that NWA 856 pyroxenes are not strongly shocked.