Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Methodology of hydrogeological characterization of deep carbonate aquifers as potential reservoirs of groundwater. Case of study: the Jurassic aquifer of <Emphasis Type="Italic">El Maestrazgo</Emphasis> (Castellón,Spain)

A methodology for the characterization of deep carbonate aquifers has been developed and applied to El Maestrazgo Jurassic aquifer in Castellón, Spain. Characterization of these aquifer formations, located at more than 300 m deep, consisted of a previous phase of compilation, analysis and synthesis of the existing information about the area, followed by a coordinated combination of different speciality studies: geology, stratigraphy, structural analysis, hydrogeology, hydrochemistry, geophysics and remote sensing. Geological studies included geological mapping, definition of stratigraphical units and facies and structural analysis. The aim of the hydrogeology study was to define aquifer formations, recharge area, aquifer points inventory and groundwater flow directions for the establishment of piezometric and water quality observation nets. Special techniques were applied, like thermal infrared aerial images and the evaluation of submarine groundwater discharge by means of natural radium isotopes. Hydrochemical techniques, including majority elements characterization and stable isotopes (¹⁸O, ²H and ³H) determination, allowed classifying hydrochemical facies and establishing a renewal pattern for water within the system. Geophysics was useful in determining the aquifer geometry, the features of the basement and the petrophysical characteristics of the geological formations. Preliminary results show an important tectonic complexity and the possibilities for groundwater uses in the area of study.     

Flexural isostatic response of the Alps to increased Quaternary erosion recorded by foreland basin remnants,SE France

We test the hypothesis that flexural isostatic compensation of the mass removed by enhanced Quaternary erosion is responsible for uplift of the Western European Alps and their forelands. We use two well‐preserved and well‐dated (1.8 Ma) abandonment surfaces of foreland basin remnants in SE France (the Chambaran and Valensole plateaux) as passive benchmarks for tilting of the foreland. Estimating their initial slope from morphometric scaling relationships, we determine bulk post‐depositional tilting of 0.5–0.8% for these surfaces. The calculated isostatic response of the Alpine lithosphere to erosional unloading, using the method recently proposed by Champagnac et al. [Geology 35 (2007) 195–198] , yields a predicted tilting of 0.3–0.4% in the considered areas, explaining approximately half of the determined post‐depositional tilting. Such long‐term deformation being insensitive to cyclic loading/unloading because of glaciations, we suspect the other half to be related to as yet undetermined long‐wavelength and long‐lived tectonic process(es).     

Waveform Shaping of Sonar Transducers for Improving the Vertical Resolution in Sub-bottom Sediments Profiling

Vertical resolution is of fundamental importance in sonar exploration and is directly related to the duration of the acoustic pulse generated by the transducer. The shorter the radiated pulse, the higher the vertical resolution. Many sub-bottom profiling sonar systems use piezoelectric transducers because they are reversible and well understood. Piezoelectric projectors are normally resonant transducers, which are intrinsically narrowband. A piezoelectric transducer is usually driven by a tone-burst. However, it is possible to use Fourier techniques to find a pre-compensated electrical driving function so that the transducer radiates a prescribed wider band acoustic waveform. This technique can be applied to synthesize zero-phase cosine-magnitude, Gaussian, and bionic pulses, with a conventional sandwich transducer. Zero-phase cosine-magnitude waveforms provide minimum length pulses (and therefore maximum resolution) within a prescribed frequency band.The aim of this paper is to illustrate the synthesis of wideband acoustic pulses using an underwater piezoelectric projector. The conventional acoustic waveform radiated when a Tonpiltz transducer is transiently excited using a “click” and allows its frequency response function to be measured. This function is used to design the electrical signal which then drives the transducer so that it radiates the shortest pulse compatible with its mechanical response. The significant resolution enhancement of the waveform shaping process is illustrated by its application to a sediment wedge model.     

A comparative mineralogical study of gas-related sediments of the Gulf of Cádiz

The Gulf of Cádiz area has been extensively surveyed in recent years and several gas-related fluid escape seafloor structures have been identified. In this study, gravity cores, collected during the ANASTASYA/00 and ANASTASYA/01 cruises, on mud volcanoes, hemipelagic sediments and dredged material from diapiric structures, have been studied. A comparative mineralogical analysis by XRD and SEM of samples from different areas has been performed in order to determine whether there is a characteristic mineralogy related to these fluid escape structures, and also to determine the origin of the mud matrix and constrain the depth of the parent units. The mineralogical analysis reflects the different origins of the different units described in the cores: hemipelagic material of the slope, clays that underlie the mud volcanoes and are discharged at the sea bottom surface, and authigenic and diagenetic minerals possibly involved in the anaerobic oxidation of methane in the mud volcano sediments.     

Onshore Neogene stratigraphy in the North of the Alboran Sea (Betic Internal Zones): Paleogeographic implications

The Neogene is the period in which the Betic Cordillera, the Rif, and the Alboran Sea acquired their present configuration. The Neogene sediments of the Betic Internal Zones (located directly to the North of the Alboran Sea) show the effects of important periods of deformation. Deposition was clearly controlled by tectonics. Therefore the generation, evolution, and total or partial destruction of basins and the formation of new, often superimposed, basins are common phenomena, according to the locations of the basins in the Betic Cordillera and to the different geodynamic situations.     

Manganese and iron distributions off central California influenced by upwelling and shelf width

In July 2002, a combination of underway mapping and discrete profiles revealed significant along-shore variability in the concentrations of manganese and iron in the vicinity of Monterey Bay, California. Both metals had lower concentrations in surface waters south of Monterey Bay, where the shelf is about 2.5 km wide, than north of Monterey Bay, where the shelf is about 10 km wide. During non-upwelling conditions over the northern broad shelf, dissolvable iron concentrations measured underway in surface waters reached 3.5 nmol L⁻¹ and dissolved manganese reached 25 nmol L⁻¹. In contrast, during non-upwelling conditions over the southern narrow shelf, dissolvable iron concentrations in surface waters were less than 1 nmol L⁻¹ and dissolved manganese concentrations were less than 5 nmol L⁻¹. A pair of vertical profiles at 1000 m water depth collected during an upwelling event showed dissolved manganese concentrations of 10 decreasing to 2 nmol L⁻¹, and dissolvable iron concentrations of 12–20 nmol L⁻¹ in the upper 100 m in the north, compared to 3.5–2 nmol L⁻¹ Mn and 0.6 nmol L⁻¹ Fe in the upper 100 m in the south, suggesting the effect of shelf width influences the chemistry of waters beyond the shelf.These observations are consistent with current understanding of the mechanism of iron supply to coastal upwelling systems: Iron from shelf sediments, predominantly associated with particles greater than 20 μm, is brought to the surface during upwelling conditions. We hypothesize that manganese oxides are brought to the surface with upwelling and are then reduced to dissolved manganese, perhaps by photoreduction, following a lag after upwelling.Greater phytoplankton biomass, primary productivity, and nutrient drawdown were observed over the broad shelf, consistent with the greater supply of iron. Incubation experiments conducted 20 km offshore in both regions, during a period of wind relaxation, confirm the potential of these sites to become limited by iron. There was no additional growth response when copper, manganese or cobalt was added in addition to iron. The growth response of surface water incubated with bottom sediment (4 nmol L⁻¹ dissolvable Fe) was slightly greater than in control incubations, but less than in the presence of 4 nmol L⁻¹ dissolved iron. This may indicate that dissolvable iron is not as bioavailable as dissolved iron, although the influence of additional inhibitory elements in the sediment cannot be ruled out.     

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies: A New Device

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).     

Aquatic surface microlayer contamination in chesapeake bay

The aquatic surface microlayer (SMIC), 50 μm thick, serves as a concentration point for metal and organic contaminants that have low water solubility or are associated with floatable particles. Also, the eggs and larvae of many fish and shellfish species float on, or come in contact with, the water surface throughout their early development. The objectives of this study were (1) to determine the present degree of aquatic surface microlayer pollution at selected sites in Chesapeake Bay, and (2) to provide a preliminary evaluation of sources contributing to any observed contamination.Twelve stations located in urban bays, major rivers, and the north central bay were sampled three times, each at 5-day intervals during May 1986. Samples of 1.4–4.1 each were collected from the upper 30–60-μm water surface (surface microlayer, SMIC) using a Teflon-coated rotating drum microlayer sampler. One sample of subsurface water was collected in the central bay.At all stations, concentrations of metals, alkanes, and aromatic hydrocarbons in the SMIC were high compared with one bulk-water sample and with typical concentrations in water of Chesapeake Bay and elsewhere. SMIC contamination varied greatly among the three sampling times, but high mean contaminant levels (total polycyclic aromatic hydrocarbons, 1.9–6.2 μg 1⁻¹; Pb, 4.9–24 μg 1⁻¹; Cu, 4–16 μg 1⁻¹; and Zn, 34–59 μg 1⁻¹) were found at the upper Potomac and northern bay sites. Three separate areas were identified on the basis of relative concentrations of different aromatic hydrocarbons in SMIC samples - the northern bay, the Potomac River, and the cleaner southern and eastern portions of the sampling area.Suspected sources of surface contamination include gasoline and diesel fuel combustion, coal combustion, and petroleum product releases. Concentrations of metals and hydrocarbons, at approximately half the stations sampled, are sufficient to pose a threat to the reproductive stages of some fish and shellfish. Sampling and analysis of the surface microlayer provides a sensitive tool for source identification and monitoring of potentially harmful aquatic pollution.     

The role of collisions with interplanetary particles in the physical evolution of comets

Effects of collisions with interplanetary particles are investigated. To this purpose, collision probabilities for comets with different orbital elements are computed. It is found that collisions may have a non-negligible effect on the physical evolution of comets. In this connection, it is shown that under certain conditions collisional lifetimes may be shorter than dynamical or vaporization lifetimes. In particular, collisional lifetimes are on average shorter for comets in retrograde orbits than those for direct ones. It is further suggested that catastrophic collisions may contribute to prevent long-period comets in retrograde orbits from reaching short-period orbits by orbital diffusion. Collisions may also produce irregularities of the nucleus brightness by leaving exposed regions of fresh volatile material and may in this way lead to a rejuvenation of old dusty short-period comets. Catastrophic collision probabilities are too low to account for the observed comet splittings, so other trigger mechanisms should be at work. However, it is shown that collisional mini-bursts (increases in brightness of one magnitude or so) caused by decimeter-sized bodies may occur rather frequently on short-period comets when they pass through the asteroid belt. The burst observed in comet Tempel-2 at 3 AU in December, 1978 could be an example of such collisional mini-bursts. The systematic observation of periodic comets when they pass through the asteroid belt could give valuable information about the spatial density of decimeter and meter-sized bodies. In particular, collisional effects for comet Halley, for which a continuous surveillance is planned, are evaluated.