Seismic reliability of traditional and innovative concentrically braced frames

Structural engineering problems are always affected by many sources of uncertainty, such as aleatory of material properties, applied loads and earthquake intensity, therefore, seismic assessment of structures should be based on probabilistic methods. Since PBSD (Performance‐based Seismic Design) philosophy was formulated, many researches have been conducted in this field in order to develop simple and accurate procedures for evaluating structural reliability. An important contribution has been provided by Jalayer and Cornell, who have developed a closed‐form expression to evaluate the mean annual frequency of exceeding a defined limit state. In this paper, by assuming the record‐to‐record variability as the only source of uncertainty, the seismic reliability of concentrically braced frames designed according to traditional and innovative methodologies is investigated, and a comparison between their performances is presented. In particular, two design methodologies have been applied: Eurocode 8 provisions and a new design methodology based on a rigorous application of ‘capacity design’ criteria. The innovative reduced section solution strategy, based on the reduction of cross sections at bracing member ends, has also been analysed. Copyright © 2011 John Wiley & Sons, Ltd.     

Groundwater flow analysis using different geothermal constraints: The case study of Acqui Terme area,northwestern Italy

We review some analytical techniques that use underground thermal data as tracers of groundwater flow. These techniques allow the evaluation of the Darcy velocity in shallow aquifers of mid-low permeability and the evaluation of heat gain/loss by conduction in deeper aquifers. Examples of application are then given for the Acqui Terme hydrothermal system, located in the Tertiary Piedmont Basin (northwestern Italy). The analysis of borehole temperatures allowed the inference of the hydraulic features of the sedimentary cover of the hydrothermal system. The results show the presence of a relatively weak flow, with upward and horizontal components, only in conglomerates occurring at the base of the marly impermeable cover. The analysis of the heat transported in the deep parts of the hydrothermal system was approached by splitting the water path into different sections, each with given shape, slope and hydraulic properties. The recharge area is situated in the upland, south of the discharge area. Meteoric water initially descends and then flows horizontally within the fractured metamorphic basement of the basin, heating by conduction. Finally, from a reservoir positioned at intermediate depths, hot water reaches rapidly the surface through a sub-vertical fault. This scheme of deep water flow is constrained by the regional surface heat flow and the local geothermal gradient, and it is consistent with data of rock–water equilibrium temperature.     

Lava stones from Neapolitan volcanic districts in the architecture of Campania region,Italy

Results of a research carried out on the lavas from Campi Flegrei and Somma-Vesuvius volcanic districts are reported here. The lavas have been widely employed, since Roman age, in several important monumental buildings of the Campania region, mainly in the town of Naples and in its province. They are classified as trachytes (Campi Flegrei products), tephri-phonolites and phono-tephrites (Somma-Vesuvius complex) from a petrographical point of view. Sampling was carried out from well-known exploitation districts. A substantial chemical difference between the products of the two sectors was confirmed, while petrophysical characterization evidenced similarity among the two different materials, although some differences were recorded even in samples coming from the same exploitation site.     

Distinctive Volcanic Material for the Production of Campana A Ware: The Workshop Area of Neapolis at the Duomo Metro Station in Naples,Italy

Recent transportation infrastructure works in Naples, Italy, provided important discoveries related to the production of pottery in the Hellenistic workshop area of Piazza Nicola Amore. A minero‐petrographic investigation was conducted on 35 samples belonging to the widespread Campana A ware and production indicators (clayey raw materials, unfired Graeco‐Italic amphorae, kiln wastes, workshop tools). Additional analysis was conducted on black‐glaze and common ware samples for comparison. The analyses reveal compositional and technological homogeneity of Campana A ware. Samples are characterized by low CaO content with evidence of both volcanic and sedimentary components, suggesting that different clay sources were properly mixed to prepare a standard recipe. Production indicators, black‐glaze and common wares, have a composition well consistent with the calcareous clays from the island of Ischia. Leucite‐ and garnet‐bearing temper from the Somma Volcano were used for the preparation of coarse‐grained pastes, unfired Graeco‐Italic amphorae, and clayey raw materials, thus suggesting that they represented the clay sources for amphorae production. Our results reveal new technological and socioeconomic aspects of Hellenistic pottery production in the Bay of Naples, in particular for the Campana A ware, now representing a new reference group: Neapolis.     

Estimation of mean spectral directions in random seas

A method for obtaining the directional spectrum, on assuming that the frequencies of the elementary waves are all different from one another, is re-proposed in a form suitable for applications to sea states near a coast. The method is applied to an interval of 10 h during which the sea state remained basically steady state off the beach at Reggio Calabria (east coast of the Straits of Messina). It is shown that the directional spectrum converges as the length of the time series data grows. A numerical simulation of a 10 h sea state confirms that the directional spectrum converges as the length of the time series grows, and the convergence is onto the known directional spectrum used to make the numerical simulation. Through the numerical simulation, it is proved that the method, generally, is suitable for applications even with short time series of wind waves (duration of about 100T_p). Finally, it is shown that the method is not necessarily inadequate even with short records of multimodal sea states with different modal directions, modal amplitude ratios and intermodal distances.     

Biomonitoring of Trace Metals by Different species of Lichens (Parmelia) in North-West Italy

The concentrations of Cd, Cu, Mn, Ni, Pb, V, and Zn were measured in four different species of lichens (Parmelia caperata, P. pastillifera, P. saxatilis, P. sulcata) sampled in North-West Italy, in order to obtain maps showing metal distribution and the degree of deviation from background (natural) conditions. Significant differences among the species were found for Zn, Mn, Pb and V, suggesting that the combined use of mixed species in biomonitoring surveys can affect the interpretation of results. Results obtained for Parmelia caperata samples have been compared with background (natural) levels, and maps showing the distribution of each metal expressed as deviation from background levels have been obtained. Overall such maps show a medium to high alteration degree in the study area.     

Processes controlling very low sedimentation rates on the continental slope of the Gonone-Orosei canyon system,NE Sardinia—terrestrial and oceanic significance

The narrow shelf and upper slope immediately above the Gonone canyon head off NE Sardinia represent areas of very low sedimentation rates. Along the sides of the canyon head (1,600 m water depth), the sediment deposits are homogeneous but show alternating light-grey intervals rich in carbonate and dark-grey ones rich in organic matter, possibly related to distal turbidite processes. Deposits older than 50,000 years are already encountered at core depths of 2.50 m, the sedimentation rates varying from 6–21 cm/10³ years in the lower parts of two cores and from 1.5–3 cm/10³ years in the upper parts. At about 35,000 years BP, both cores show a simultaneous drop in sedimentation rate by a factor of 3, probably in response to local mechanisms of channel avulsion. Lithological, mineralogical and geochemical properties reveal the environmental factors which are responsible for the extremely slow sediment accumulation. The southernmost sector of the coast, and partly also of the shelf, consists of Jurassic limestones which supply only small amounts of fine-grained material transported in suspension. During the last sea-level highstand, the accumulation of the Cedrino River pro-delta remained restricted to the coast, the low siliciclastic sediment yields resulting in poor shelf sediment trapping. The present morphology of the canyon head prevented the occurrence of gravity processes in the deeper part of the canyon system, including the coring sites. Accordingly, deposition was mainly fed by hemipelagic material of planktonic origin, together with only moderate terrigenous inputs. On a wider late Pleistocene timescale, seismic data indicate the occurrence of a coarse-grained, layered turbidite facies, implying a very different architecture of the canyon drainage system probably prior to 60,000 years BP.     

Statistical properties of dissipation bursts within turbulence: Solar flares and geomagnetic activity

We investigate some statistical properties of the solar soft X-ray flux and of the Auroral Electrojet (AE) index. For both these signals, the probability density functions (PDFs) of normalized differences are shown to display wide, non-Gaussian tails. The shape of the PDFs is nearly unchanged as the timelag, used to calculate differences, varies. Moreover, the two time series are characterized by a power-law distribution for waiting times between successive bursts and by a clear departure from an hypothesis of locally Poisson statistics. A similar behavior is found in a shell model of magnetohydrodynamic (MHD) turbulence.