Temperature and precipitation trends in Canada during the 20th century

Abstract

Trends in Canadian temperature and precipitation during the 20th century are analyzed using recently updated and adjusted station data. Six elements, maximum, minimum and mean temperatures along with diurnal temperature range (DTR), precipitation totals and ratio of snowfall to total precipitation are investigated. Anomalies from the 1961–1990 reference period were first obtained at individual stations, and were then used to generate gridded datasets for subsequent trend analyses. Trends were computed for 1900–1998 for southern Canada (south of 60°N), and separately for 1950–1998 for the entire country, due to insufficient data in the high arctic prior to the 1950s.

From 1900–1998, the annual mean temperature has increased between 0.5 and 1.5°C in the south. The warming is greater in minimum temperature than in maximum temperature in the first half of the century, resulting in a decrease of DTR. The greatest warming occurred in the west, with statistically significant increases mostly seen during spring and summer periods. Annual precipitation has also increased from 5% to 35% in southern Canada over the same period. In general, the ratio of snowfall to total precipitation has been increasing due mostly to the increase in winter precipitation which generally falls as snow and an increase of ratio in autumn. Negative trends were identified in some southern regions during spring. From 1950–1998, the pattern of temperature change is distinct: warming in the south and west and cooling in the northeast, with similar magnitudes in both maximum and minimum temperatures. This pattern is mostly evident in winter and spring. Across Canada, precipitation has increased by 5% to 35%, with significant negative trends found in southern regions during winter. Overall, the ratio of snowfall to total precipitation has increased, with significant negative trends occurring mostly in southern Canada during spring.

Indices of abnormal climate conditions are also examined. These indices were defined as areas of Canada for 1950–1998, or southern Canada for 1900–1998, with temperature or precipitation anomalies above the 66th or below the 34th percentiles in their relevant time series. These confirmed the above findings and showed that climate has been becoming gradually wetter and warmer in southern Canada throughout the entire century, and in all of Canada during the latter half of the century.     

Roughness length in the turbulent Ekman layer above the sea bed

Roughness lengths were determined from average current profiles in the logarithmic boundary layer at a site in the southern North Sea. Grab samples indicated that the bed configuration controlling the bed roughness was unlikely to change even at maximum spring tides, but the measured roughness lengths were found to decrease as the speed of the flow 10 m above the bed increased. This has been qualitatively interpreted in terms of the size of the turbulent eddies within the flow and their effectiveness at “feeling” the size of the elements forming the bed roughness. It is also shown that the dependence of the observed drag coefficient on the Rossby number follows closely the theoretical form when the roughness length decreases with increasing flow speed.     

A roadmap for a dedicated Earth Science Grid platform

Due to its intensive data processing and highly distributed organization, the multidisciplinary Earth Science applications community is uniquely positioned for the uptake and exploitation of Grid technologies. Currently Enabling Grids for E-sciencE, and other large Grid infrastructures are already deployed and capable of operational services. So far however, the adoption and exploitation of Grid technology throughout the Earth Science community has been slower than expected. The Dissemination and Exploitation of GRids in Earth sciencE project, proposed by the European Commission to assist and accelerate this process in a number of different ways, had between its main goals the creation of a roadmap towards Earth Science Grid platform. This paper presents the resulting roadmap.     

Partially standing wave measurement in the presence of steady current by use of coincident velocity and/or pressure data

In recent years, instrumentation for field flow measurements has become more and more sophisticated. In particular, local pressure and velocity are measured at frequency rates up to at least 2 Hz, which gives information on wave energy. The present work describes the methods for partially standing wave measurement in the presence of current by use of coincident measurements of both horizontal velocity and pressure, or vertical velocity. Reflection calculated from either coincident horizontal and vertical velocities or three-gauge methods are compared. They are based on existing experiments carried out in an ocean wave basin for both regular and irregular waves in the presence of current. Applications to field measurements, out of and in the breaking zones are then presented. In the nearshore, coincident horizontal and vertical velocities far from the bottom, and coincident horizontal velocity and pressure close to the bottom give relevant information concerning partially standing waves.     

Rocking strong earthquake accelerations

In this paper, the method presented by Lee and Trifunac (1985) for generating synthetic torsional accelerograms has been extended to the estimation of synthetic rocking accelerograms and of their response spectra. Results from our previous regression analyses for the characterization of strong shaking in terms of (1) earthquake magnitude and epicentral distance, or (2) Modified Mercalli Intensity at the site are utilized here again. The effects of geologic environment, in terms of site parameters or the representative depth of sediments, which influence amplification, and the dispersive properties of ground motion are also included. The synthetic rocking accelerogram is then constructed from the horizontal and vertical acceleration components.     

Mono- and dicyclic unsaturated triterpenoid hydrocarbons in sediments from Lake Masoko (Tanzania) widely extend the botryococcene family

A mixture of C₃₃–C₃₇ botryococcenes and partially reduced derivatives was isolated from ca. 32,000 year old sediment from Lake Masoko, a freshwater crater lake in the Rungwe Range area (Tanzania). Botryococcenes and derivatives accounted for 246 μg/g dry sediment and for >92% of the hydrocarbon fraction; 1D and 2D nuclear magnetic resonance spectroscopy (NMR) and mass spectrometry allowed the structure of the dominant botryococcene (43% of hydrocarbon fraction) to be established, after purification using high performance liquid chromatography (HPLC). The compound is a novel tetraunsaturated dicyclic C₃₄ botryococcene and is named C₃₄ masokocene. Overall, the structures of six other novel botryococcenes and four partially reduced derivatives were tentatively assigned. The structures of the new biomarkers, three dicyclic C₃₄–C₃₆ botryococcenes (or masokocenes) and seven monocyclic C₃₄–C₃₇ analogues are discussed along with their biosynthetic relationship. The high abundance of such polyunsaturated compounds preserved in 32,000 year old sediment from the lake indicates an aquatic ecosystem dominated at the time by the green alga Botryococcus braunii, as well very good preservation of the organic matter.     

The Decline and Restoration of a Coastal Lagoon (Lake Veere) in the Dutch Delta

The former tidal inlet Lake Veere was turned into a stagnant brackish lake in 1961. Ever since, the system has shown a continuous degradation. The current study shows the monitoring results for the macrozoobenthic communities and the abiotic conditions for the period 1990–2008. This includes the first step to remediation, the restoration of the exchange between the tidal marine Eastern Scheldt and Lake Veere in 2004. A continuous decline in water clearance co-occurring with decreasing macrofauna densities and richness was observed till 2004. Water quality (e.g., secchi depth, nutrient levels, and oxygen conditions) improved significantly after the measure at a higher salinity level with less variation. But the macrofauna densities, biomass, and diversity did not improve yet. First indications of changes in the benthic communities by arrival of new and returning species are however observed and show that restoration at macrofauna level follows the improved abiotic conditions with a delay of several years.     

Surface motion of a semi-cylindrical hill for incident plane SV waves： Analytical solution

Introduction Scattering of incident waves by local topographies is one of the most attractive topics in the field of engineering seismology. They can be resolved by either a numerical method or an analyti-cal method. The numerical methods include finite difference method, finite element method, boundary element method, etc. The analytical method is the wave function expansion method. Al-though numerical methods can be used for arbitrary-shaped topographies, the analytical solutions are still …     

Nonparametric Estimates of the Sea State Bias for the Jason-1 Radar Altimeter

The Jason-1 sea state bias (SSB) is analyzed in depth from the first year of GDR products. Compared to previous missions, this work benefits from two aspects of the empirical determination of the SSB from the altimetric data themselves. First, from a methodological point of view, a nonparametric technique (NP) has been developed and largely tested on TOPEX/Poseidon 1, GFO and Envisat data. The NP estimator has proven to be a useful tool in the SSB estimation, and it is now mature enough to be used for a refined analysis. On the other hand, the SSB can be extracted from three different data sets (crossovers, collinear data, and residuals) with different characteristics. It is then possible to cross calibrate various estimations of the SSB models and to determine the most accurate one. A systematic comparison is made between these different estimates for the Jason-1 altimeter. The collinear and crossover data sets yield very similar estimates despite their difference of spatial and temporal distributions. These SSB models assure consistency with the TOPEX mission when comparing Jason-1 and TOPEX residuals during the tandem phase. Thanks to the present work, the impact of the short wavelengths filtering on the SSB estimation is evidenced. More generally, our understanding of potential errors affecting the sea surface height and their impact onto the SSB estimation is also improved.