Petroleum and PAH contamination of the Black Sea

Concern has been expressed regarding the extent of contamination of the Black Sea. Analyses of coastal sediments taken from throughout the region indicate, however, that levels of petroleum hydrocarbons (2-300 microg g(-1) dry wt total hydrocarbons) are generally comparable to those encountered in the Mediterranean and are lower than concentrations reported for highly contaminated areas such as the Gulf, Hong Kong, Taiwan and New York Bight. Highest concentrations of total hydrocarbons (>100 microg g(-1) dry wt) were associated with discharges from Odessa, Sochi and the River Danube. Chronic/degraded petroleum was the major contributor at these sites. Samples from the Ukrainian coastline were comparatively clean (<10 microg g(-1) dry wt total hydrocarbons). Major contributions of fresh oil (as indicated by sigma n-C14-34) occur through the River Danube. Concerning total PAH, concentrations (7-638 ng g(-1) dry wt) compare to relatively unpolluted locations in the Mediterranean and are much lower than levels reported for polluted UK estuaries (e.g. Mersey, Tyne, Thames). Both pyrolytic and petrogenic PAH are present in most samples, although petroleum derived PAH are dominant at Sochi and pyrolytic sources are prevalent in the Bosphorus region. The absence of a correlation between total hydrocarbons and PAH (R2 = 0.04) indicates different primary sources for the two.     

Time-scales of assembly and thermal history of a composite felsic pluton: constraints from the Emerald Lake area, northern Canadian Cordillera, Yukon

Knowledge of the time-scales of emplacement and thermal history during assembly of composite felsic plutons in the shallow crust are critical to deciphering the processes of crustal growth and magma chamber development. Detailed petrological and chemical study of the mid-Cretaceous, composite Emerald Lake pluton, from the northern Canadian Cordillera, Yukon Territory, coupled with U–Pb and ⁴⁰Ar/³⁹Ar geochronology, indicates that this pluton was intruded as a series of magmatic pulses. Intrusion of these pulses produced a strong petrological zonation from augite syenite, hornblende quartz syenite and monzonite, to biotite granite. Our data further indicate that multiple phases were emplaced and cooled to below the mineral closure temperatures over a time-scale on the order of the resolution of the ⁴⁰Ar/³⁹Ar technique (1 Myr), and that emplacement occurred at 94.3 Ma. Simple thermal modelling and heat conduction calculations were used to further constrain the temporal relationships within the intrusion. These calculations are consistent with the geochronology and show that emplacement and cooling were complete in less than 100 kyr and probably 70±5 kyr. These results demonstrate that production, transport and emplacement of the different phases of the Emerald Lake pluton occurred essentially simultaneously, and that these processes must also have been closely related in time and space. By analogy, these results provide insights into the assembly and petrogenesis of other complex intrusions and ultimately lead to an understanding of the processes involved in crustal development.     

Fission track and fault kinematics analyses for new insight into the Late Cenozoic tectonic regime changes in West-Central Sulawesi (Indonesia)

A 3-D density model for the Cretan and Libyan Seas and Crete was developed by gravity modelling constrained by five 2-D seismic lines. Velocity values of these cross-sections were used to obtain the initial densities using the Nafe–Drake and Birch empirical functions for the sediments, the crust and the upper mantle. The crust outside the Cretan Arc is 18 to 24 km thick, including 10 to 14 km thick sediments. The crust below central Crete at its thickest section, has values between 32 and 34 km, consisting of continental crust of the Aegean microplate, which is thickened by the subducted oceanic plate below the Cretan Arc. The oceanic lithosphere is decoupled from the continental along a NW–SE striking front between eastern Crete and the Island of Kythera south of Peloponnese. It plunges steeply below the southern Aegean Sea and is probably associated with the present volcanic activity of the southern Aegean Sea in agreement with published seismological observations of intermediate seismicity. Low density and velocity upper mantle below the Cretan Sea with ρ  3.25 × 10³ kg/m³ and V_p velocity of compressional waves around 7.7 km/s, which are also in agreement with observed high heat flow density values, point out at the mobilization of the upper mantle material here. Outside the Hellenic Arc the upper mantle density and velocity are ρ ≥ 3.32 × 10³ kg/m³ and V_p = 8.0 km/s, respectively. The crust below the Cretan Sea is thin continental of 15 to 20 km thickness, including 3 to 4 km of sediments. Thick accumulations of sediments, located to the SSW and SSE of Crete, are separated by a block of continental crust extended for more than 100 km south of Central Crete. These deep sedimentary basins are located on the oceanic crust backstopped by the continental crust of the Aegean microplate. The stretched continental margin of Africa, north of Cyrenaica, and the abruptly terminated continental Aegean microplate south of Crete are separated by oceanic lithosphere of only 60 to 80 km width at their closest proximity. To the east and west, the areas are floored by oceanic lithosphere, which rapidly widens towards the Herodotus Abyssal plain and the deep Ionian Basin of the central Mediterranean Sea. Crustal shortening between the continental margins of the Aegean microplate and Cyrenaica of North Africa influence the deformation of the sediments of the Mediterranean Ridge that has been divided in an internal and external zone. The continental margin of Cyrenaica extends for more than 80 km to the north of the African coast in form of a huge ramp, while that of the Aegean microplate is abruptly truncated by very steep fractures towards the Mediterranean Ridge. Changes in the deformation style of the sediments express differences of the tectonic processes that control them. That is, subduction to the northeast and crustal subsidence to the south of Crete. Strike-slip movement between Crete and Libya is required by seismological observations.     

La structure du Rift Africain dans la Région du Lac Kivu (Zaïre oriental)

In the Kivu lake region, the faults of the rift are concentrated in three netting following three main directions NE-SW, N-S and NW-SE. Some small tectonics trenchs. aligned along these three directions are intersecting in a zone lengthening in the N-S direction and 100–200 km wide. It does not look as if there was a chronological and regular succession in the coming out of faults belonging to a netting defined by a certain direction with regard to the faults of another netting; for, on the occasion of short tectonics events (eruptions, earthquakes), it is noticeable than any of these three nettings, are reactivated.     

Magnesium isotopes constraints on the origin of Mg-rich olivines from the Allende chondrite: Nebular versus planetary?

High precision Mg isotope measurements by multi-collector ion microprobe show that refractory olivines from the Allende chondrite, either olivines isolated in the matrix (2 samples studied) or olivines in type I chondrules (6 samples studied), have variable δ²⁶Mg* enrichments and deficits (calculated in permil as the ²⁶Mg deviation from the instrumental mass fractionation line) relative to the Earth. Most average δ²⁶Mg* (noted δ²⁶Mg*_av) values (between 10 and 20 analyses per chondrule) are negative but the total range is from ?0.029 (± 0.010) ‰ (2 sigma errors) to + 0.011 (± 0.011) ‰ with an exception of one olivine at + 0.043 (± 0.023) ‰. These variations in δ²⁶Mg*_av reflect the formation of the olivines from reservoirs enriched in various amounts of ²⁶Mg by the decay of short-lived ²⁶Al (T_1/2 = 0.73 Ma). Similarly, 30 analyses of olivines from the Eagle Station pallasite show a δ²⁶Mg*_av value of ?0.033 ± 0.008‰, as negative as some olivines from Allende chondrules and the Solar system initial δ²⁶Mg* value of ?0.038 ± 0.004‰ (defined at the time of formation of type B Ca–Al-rich inclusions – CAIs – when ²⁶Al/²⁷Al = 5.23 × 10^?5, Jacobsen et al., 2008).Because olivines are Al-poor and because their Mg isotopic compositions are not reset during the chondrule forming events, their δ²⁶Mg*_av can be used to calculate model crystallization ages relative to various theoretical Mg isotope growth curves. The two end-member scenarios considered are (i) a “nebular” growth in which the Al/Mg ratio remains chondritic and (ii) a “planetary” growth in which a significant increase of the Al/Mg ratio can be due to, for instance, olivine magmatic fractionation. The low δ²⁶Mg*_av value of olivines from the Eagle Station pallasite demonstrate that metal-silicate differentiation occurred as early as ~ 0. 15_- 0. 23^+ 0. 29 Ma after CAIs in either of the growth scenarios. Similarly the variable δ²⁶Mg*_av values of refractory olivines can be understood if they were formed in planetesimals which started to differentiate as early as the Eagle Station parent body. Accretion of these planetesimals must have been coeval to the formation of CAIs and their disruption could explain why their fragments (Mg-rich olivines) were distributed in the chondrule forming regions of the disk.     

Méthodologie de l'extraction des hydrocarbures aromatiques polycycliques. Application à des sédiments de la lagune de Bizerte (Tunisie)Methodology of extraction of polycyclic aromatic hydrocarbons. Application to sediment from the Bizerte Lagoon (Tunisia)

The marine environment is very complex, with several important chemical, biological, and sedimentological interactions. Sediments constitute a reservoir for numerous pollutants, including polycyclic aromatic hydrocarbons (PAHs). PAHs are known by their mutagenic and/or carcinogenic effect. This study evaluates contamination levels in Bizerte Lagoon with respect to PAHs. The extraction efficiency of PAHs from sediment has been evaluated using Soxhlet or ultrasonic procedures, based on the recovery of an internal standard (9,10-dihydroanthracene). Several PAHs were found, including sixteen that are reported in the priority list of pollutants of the US Environmental Protection Agency (EPA). PAHs analysis was carried out by GC–FID and GC–MS for 16 samples sampled in two seasons: summer and winter. Results permit an assessment of PAHs pollution in the Bizerte Lagoon. To cite this article: N. Mzoughi et al., C. R. Geoscience 334 (2002) 893–901.     

Polychlorinated biphenyls in the Mediterranean Sea

Although concentrations of polychlorinated biphenyls (PCBs) in biota, sediment and water of the Mediterranean Sea have been determined, most available data are for samples collected within the narrow coastal zone at relatively few locations. PCB concentrations in samples from the open Mediterranean Sea have not previously been reported. We report here the concentrations of PCBs in surface and sub-surface water from 36 locations. Analysis of our data indicate that there may be some correlation between PCB concentration in Mediterranean seawater and certain demographic and oceanographic features of the region.     

Distribution of petroleum hydrocarbons and organochlorinated contaminants in marine biota and coastal sediments from the ROPME Sea Area during 2005

The composition and spatial distribution of various petroleum hydrocarbons (PHs), comprising both aliphatic and polycyclic aromatic hydrocarbons (PAHs), and selected chlorinated pesticides and PCBs were measured in biota and coastal sediments from seven countries in the Persian Gulf and the Gulf of Oman (Bahrain, Iran, Kuwait, Oman, Qatar, Saudi Arabia and the United Arab Emirates). Evidence of extensive marine contamination with respect to organochlorinated compounds and PHs was not observed. Only one site, namely the BAPCO oil refinery in Bahrain, was considered to be chronically contaminated. Comparison of the results from this survey for Σ DDTs and Σ PCBs in rock oysters from the Gulf of Oman with similar measurements made at the same locations over the past two decades indicates a temporal trend of overall decreasing Σ PCB concentrations in oysters, whereas Σ DDTs levels have little changed during that period.