Differential reproductive strategies of two bivalves in the Dutch Wadden Sea

Cerastoderma edule and Mya arenaria are two common bivalve species in European waters. Longevity and maximum size are much greater in the latter species. Because comparison of species life-history strategies states that a long life span (i.e. high annual survival) generally goes with lower fecundity, we hypothesise that reproductive output would be lower in M. arenaria than in C. edule. In the present paper, we studied the reproductive strategies of these two species in an intertidal and a subtidal area of the western Dutch Wadden Sea, by following seasonal changes in absolute and relative weights of somatic and gonadal tissues in these bivalves. Starting of spawning was similar in the two species, around May, except for intertidal M. arenaria, which initiated spawning in August. Individual energy investment in reproduction was similar for the two species but, unlike M. arenaria, C. edule spawned completely, releasing all energy of gonadal mass in the form of gametes. Mya arenaria used the gonad not only for reproduction but also for storage. In the intertidal area, we found a trade-off between longevity and reproduction, i.e. maximum reproductive output (expressed as a proportion of body mass) was higher in C. edule than in M. arenaria. However, since body size is larger and life span longer in M. arenaria than in C. edule, mean lifetime reproductive output per individual must be higher in the first than in the latter. Based on the differences in reproductive strategies of these two species, we hypothesise that the negative effects of warming climate on bivalve population dynamics in the Wadden Sea will be stronger in C. edule than in M. arenaria.     

The AquaDEB project (phase I): Analysing the physiological flexibility of aquatic species and connecting physiological diversity to ecological and evolutionary processes by using Dynamic Energy Budgets

The European Research Project AquaDEB (2007–2011, http://www.ifremer.fr/aquadeb/) is joining skills and expertise of some French and Dutch research institutes and universities to analyse the physiological flexibility of aquatic organisms and to link it to ecological and evolutionary processes within a common theoretical framework for quantitative bioenergetics [Kooijman, S.A.L.M., 2000. Dynamic energy and mass budgets in biological systems. Cambridge University Press, Cambridge]. The main scientific objectives in AquaDEB are i) to study and compare the sensitivity of aquatic species (mainly molluscs and fish) to environmental variability of natural or human origin, and ii) to evaluate the related consequences at different biological levels (individual, population, ecosystem) and temporal scales (life cycle, population dynamics, evolution). At mid-term life, the AquaDEB collaboration has already yielded interesting results by quantifying bio-energetic processes of various aquatic species (e.g. molluscs, fish, crustaceans, algae) with a single mathematical framework. It has also allowed to federate scientists with different backgrounds, e.g. mathematics, microbiology, ecology, chemistry, and working in different fields, e.g. aquaculture, fisheries, ecology, agronomy, ecotoxicology, climate change. For the two coming years, the focus of the AquaDEB collaboration will be in priority: (i) to compare energetic and physiological strategies among species through the DEB parameter values and to identify the factors responsible for any differences in bioenergetics and physiology; and to compare dynamic (DEB) versus static (SEB) energy models to study the physiological performance of aquatic species; (ii) to consider different scenarios of environmental disruption (excess of nutrients, diffuse or massive pollution, exploitation by man, climate change) to forecast effects on growth, reproduction and survival of key species; (iii) to scale up the models for a few species from the individual level up to the level of evolutionary processes.     

The relation between rigorous and Helmert’s definitions of orthometric heights

Following our earlier definition of the rigorous orthometric height [J Geod 79(1-3):82–92 (2005)] we present the derivation and calculation of the differences between this and the Helmert orthometric height, which is embedded in the vertical datums used in numerous countries. By way of comparison, we also consider Mader and Niethammer’s refinements to the Helmert orthometric height. For a profile across the Canadian Rocky Mountains (maximum height of ~2,800 m), the rigorous correction to Helmert’s height reaches ~13 cm, whereas the Mader and Niethammer corrections only reach ~3 cm. The discrepancy is due mostly to the rigorous correction’s consideration of the geoid-generated gravity disturbance. We also point out that several of the terms derived here are the same as those used in regional gravimetric geoid models, thus simplifying their implementation. This will enable those who currently use Helmert orthometric heights to upgrade them to a more rigorous height system based on the Earth’s gravity field and one that is more compatible with a regional geoid model.     

Stratigraphic architecture of Solander Basin records Southern Ocean currents and subduction initiation beneath southwest New Zealand

Solander Basin is characterized by subduction initiation at the Pacific‐Australia plate boundary, where high biological productivity is found at the northern edge of the Antarctic Circumpolar Current. Sedimentary architecture results from tectonic influences on accommodation space, sediment supply and ocean currents (via physiography); and climate influence on ocean currents and biological productivity. We present the first seismic‐stratigraphic analysis of Solander Basin based on high‐fold seismic‐reflection data (voyage MGL1803, SISIE). Solander Trough physiography formed by Eocene rifting, but basinal strata are mostly younger than ca. 17 Ma, when we infer Puysegur Ridge formed and sheltered Solander Basin from bottom currents, and mountain growth onshore increased sediment supply. Initial inversion on the Tauru Fault started at ca. 15 Ma, but reverse faulting from 12 to ca. 8 Ma on both the Tauru and Parara Faults was likely associated with reorganization and formation of the subduction thrust. The new seabed topography forced sediment pathways to become channelized at low points or antecedent gorges. Since 5 Ma, southern Puysegur Ridge and Fiordland mountains spread out towards the east and Solander Anticline grew in response to ongoing subduction and growth of a slab. Solander Basin had high sedimentation rates because (1) it is sheltered from bottom currents by Puysegur Ridge; and (2) it has a mountainous land area that supplies sediment to its northern end. Sedimentary architecture is asymmetric due to the Subtropical Front, which moves pelagic and hemi‐pelagic sediment, including dilute parts of gravity flows, eastward and accretes contourites to the shelf south of Stewart Island. Levees, scours, drifts and ridges of folded sediment characterize western Solander Basin, whereas hemi‐pelagic drape and secondary gravity flows are found east of the meandering axial Solander Channel. The high‐resolution record of climate and tectonics that Solander Basin contains may yield excellent sites for future scientific ocean drilling.     

A record of accelerated erosion in the recent sediments of Blelham Tarn in the English Lake district

Two frozen cores from Blelham Tarn were subsampled and measured using mineral magnetic, loss-on-ignition (LOI), radiometric, granulometric and diatom analyses. A detailed chronology was established using varves, radioisotopes and diatoms. This has enabled an accurately dated reconstruction of sedimentation over the past forty years. Despite a large increase in lake productivity, evidence suggests that the observed exponential increase in sedimentation rates can be attributed to erosion within the catchment. The predominant sediment source has been identified as surface soil. A comparison between the trend of accelerated sedimentation and the record of increased sheep stocking density for the area within which the most of the catchment lies, as well as observations of contemporary surface processes within the catchment, both suggest that much of the recent erosion is a direct response to increased pressure from sheep grazing.     

Paleohydrology and paleoclimate records in a saline prairie lake core: mineral,isotope and organic indicators

This pilot study examines the potential of obtaining a sedimentary record of paleoenvironmental/climatic/hydrologic conditions for saline Redberry Lake in southern Saskatchewan, Canada. The tools are mineralogy, stable isotopes and pigments. The upper meter of an offshore sediment core contains 10 to 20% by weight aragonite (CaCO₃), which apparently precipitated in the water column. The ¹⁸O and ¹³C of the bulk aragonite (corrected for content of detrital calcite) vary by 4 to 5. Enrichment in ¹⁸O in aragonite is significantly correlated with pigment concentrations (chlorophyll a, phaeophytin). The ¹⁸O and pigment data provide evidence for relatively dry and/or warm conditions and high limnetic productivity for the period 2500 to 1500 yrs B.P. After 1500 B.P., the climate was apparently similar to the present, with two episodes of relatively enhanced productivity, dryness and/or warmth, at around 1000 to 900 and 500 to 200 B.P. During the past century, Redberry Lake has decreased approximately 8 m in depth and its salinity has doubled. No clear sedimentary signal was observed in response to these recent hydrologic trends. These changes have not been associated with a significant climate trend in the region, but may have been induced by land use changes in the catchment.This publication is the third of a series of papers presented at the Conference on Sedimentary and Paleolimnological Records of Saline Lakes. This Conference was held August 13–16, 1991 at the University of Saskatchewan, Saskatoon, Canada. Dr. Evans is serving as Guest Editor for this series.     

Patterns of Irrigated Agricultural Land Conversion in a Western U.S. Watershed: Implications for Landscape-Level Water Management and Land-Use Planning

In irrigated agricultural landscapes, land-use conversion may have landscape-level social, hydrological, and ecological effects. We used geographic information systems (GIS) and interviews to analyze development effects on irrigation in the Henry's Fork Watershed, Idaho. Farmers developed irrigation there in the 19th century, and incidental recharge from canal seepage and flood irrigation raised groundwater levels and expanded wetlands. Cohesive culture in agricultural communities sustained irrigation systems until amenity-driven demographic shifts beginning in the 1970s led to development approved by local governments with land-use planning but no water-management authority. Although only 5% of irrigated land has been converted, development has fragmented irrigated landscapes and made canal-system operation more difficult, potentially reducing groundwater levels, wetland extent, and return flows critical to downstream irrigators and fish and wildlife. We discuss future scenarios, highlighting the need for increased communication among local and state governments regarding land use and water management in irrigated landscapes across the West.     

Using a Bayesian estimator to combine information from a cluster analysis and remote sensing data to estimate high-resolution data for agricultural production in Germany

In Germany, a county-resolution data set that consists of 35 land-use and animal-stock categories has been used extensively to assess the impact of agriculture on the environment. However, because such environmental effects as emission or nutrient surplus depend on the location, even a county resolution might produce misleading results. The aim of this article is to propose a Bayesian approach which combines two sorts of information, with one being treated as defining the prior and the other the data to form a posterior, used to estimate a data set at a municipality resolution. We define the joint prior density function based on (i) remote sensing data, thus accounting for differences in county data and missing data at the municipality level, and (ii) the results of a cluster analysis that was previously applied to the micro-census, whereas the data are defined by official statistics at the county level. This approach results in a fairly accurate data set at the municipality level. The results, using the proposed method, are validated by the national research data centre by comparing the estimates to actual observations. The test statistics presented here demonstrate that the proposed approach adequately estimates the production activities.     

Radiation from an impulsive line source in an unbounded homogeneous anisotropic medium

Summary. The space-time elastic wave motion generated by an impulsive line source in a homogeneous anisotropic medium is calculated with the aid of the Cagniard-de Hoop method. Two types of sources are considered in detail, viz. a line source of expansion (model for an explosive source) and a line force (model for a mechanical vibrator). Numerical results are presented for the radiated particle velocity in the medium including those regions of space where shear-wave triplication occurs. There is a marked difference in the time response observed for the two types of sources and for the different positions of the receiver with respect to the source position. These waveform differences are important when the radiated wave is used to determine experimentally the elastic properties of the medium. As compared with the traditional Fourier-integral transform method to handle this problem, the computation time with the present method is considerably less.