Groundwater exploitation and recharge rate estimation of a quaternary sand aquifer in Dar-es-Salaam area,Tanzania

Dar-es-Salaam City gets water supply from surface water and groundwater. The groundwater is used to supplement surface water supply and has increasingly become a major source of water supply in the city. The study area comprises three major parts: the central coastal plain with quaternary fluvial–deltaic sediments, the deltaic Mio-Pliocene clay-bound sands and gravels in the northwest and southeast and the Lower Miocene fluviatile sandstones of Pugu Hills in the west of the study area. The main objective of this study was to quantify the integrated water balance. The major source of renewable groundwater in the aquifer is rainfall. Hence, the average recharge of 256.2 mm/year (for the year 2006) to the aquifer was estimated using the balance method of Thornthwaite and Mather, which is equal to 99.4 hm³/year for the whole alluvial aquifer. This value was balanced with total groundwater abstraction of 8.59 hm³/year, baseflow to rivers of 75.7 hm³/year and discharge into the sea (15.11 hm³/year).     

Geology ‘far from the madding crowd’, along the northern border of Vietnam

To the north of Hanoi, about a day's drive by car, lies Ha Giang Province, the northernmost region of Vietnam. Ha Giang is remote from the hustle and bustle of daily life, and beyond its eponymous provincial capital towards the border with China, mountains rise quickly to Quan Ba, ‘Heaven's Gate’. The mountains form an uneven landscape of steep‐sided karst rising from deep river‐cut gorges and form a formidable barrier on the northern frontier of Vietnam. Beyond ‘Heaven's Gate’ lies the little travelled region of Dong Van, with its majestic mountains of Palaeozoic strata rising precipitously to the sky. Here, a century ago, the French geologists Henri Mansuy and Jacques Deprat documented early finds of fossils from lower Palaeozoic strata on the border with China.     

Denudation and cooling of the Lake Teletskoye Region in the Altai Mountains (South Siberia) as revealed by apatite fission-track thermochronology

Lake Teletskoye occupies a narrow graben located in the northwestern sector of the Altai fold belt in South Siberia. The lake basin is thought to have formed during the Pleistocene as a distant result of the Cenozoic collision of India and Eurasia that caused a tectonic reactivation of the Palaeozoic Gorny–Altai (GA) and West Sayan (WS) blocks.The present work reports of a pilot fission-track study performed on 13 apatite separates collected from rocks that were sampled along two profiles in close proximity of the lake. The age–length data and AFT thermochronological modelling reveal two important phases of cooling in the Altai Mountains, a first one during the Late Jurassic–Early Cretaceous and a second one that started in the Miocene–Pliocene and that persists until today. The first event is interpreted to result from uplift-induced denudation probably related to the closure of the Mongol–Okhotsk Ocean; the second event can be linked to the young Cenozoic movements that lie at the origin of the formation of the Lake Teletskoye basin.     

Hyperpycnal-fed turbidite lobe architecture and recent sedimentary processes: A case study from the Al Batha turbidite system, Oman margin

The main sediment depocenter along the Oman margin is the Al Batha turbidite system that develops in the Gulf of Oman basin. It is directly connected to the wadi Al Batha, and forms a typical sand and mud rich point source system that acts as regional sediment conduit and feeds a ~ 1000 km² sandy lobe.The Al Batha lobe depositional architecture has been investigated in detail using very high-resolution seismic, multibeam echosounder data and sediment cores. Several scales of depositional architecture can be observed. The Al Batha lobe is composed of several depositional units, made of stacked elementary sediment bodies (thinner than 5 m) that are each related to a single flow event. The lobe is connected to the feeder system through a channel-lobe transition zone (CLTZ) that extends on more than 25 km. The lobe can be divided into proximal, middle and distal lobe areas. The proximal lobe is an area of erosion and by-pass with small axial feeder channels that rapidly splay into several small distributaries. They disappear in the mid-lobe area where deposits consist of vertically stacked tabular to lens-shaped sediment bodies, with a lateral continuity that can exceed 10 km. The distal lobe fringe shows a classical facies transition towards thin-bedded basin plain deposits.Sub-surface deposits consist of sandy turbidites and hyperpycnites, interbedded with fine-grained deposits (thin turbidites, hyperpycnites, or hemipelagites). Although these distal deposits are mainly related to flow transformations and concentration evolution, they highlight the importance of flooding of the wadi Al Batha on the sediment transfer to the deep basin. The thick sandy hyperpycnites recovered in such a distal area are also possibly related to the initial properties of gravity flows, in relation to the flooding characteristics of mountainous desert streams.Finally, the Al Batha lobe depositional architecture is typical of sand-rich lobes found within “small”, sand and mud rich turbidite systems fed by mountainous “dirty” rivers. Turbidite sedimentation in the Al Batha system appears to be primarily controlled by the strong climatic and geomorphic forcing parameters (i.e. semi-arid environment with ephemeral, mountainous rivers subjected to flash-flooding).     

Temperature dependence of the 57Fe Mössbauer parameters in riebeckite

Mössbauer spectra for two riebeckite minerals were collected at temperatures in the range 4.2 to 500 K. The magnetic-ordering temperatures were found to be 33±1 and 31±1 K respectively. Fitting the paramagnetic spectra with a discrete number of doublets (three or four) did not lead to consistent results. Instead, a superposition of an Fe³⁺ (M2) doublet and one distributed ferrous component was found to produce adequate fits with reasonable parameter values. For both samples, a minor fraction of ferrous ions was observed to be present at the M4 sites and for one of the samples at the M2 sites as well. The temperature variations of the center shifts were well reproduced using the Debye model of the lattice vibrational spectrum to evaluate the second-order Doppler shift. The characteristic Mössbauer temperatures were calculated to be in the range 340–390 K for Fe²⁺, and 520 K for Fe³⁺. The temperature dependences of the various ferrous quadrupole splittings could not be explained in terms of the point-charge model and assuming a temperature-independent energy-level scheme for the ⁵D term. It is suggested that a gradual change with temperature of the orbital-level splittings takes place. All calculations yielded a positive sign for the principal component of the electric field gradient (EFG). The spectrum recorded at 4.2 K for one of the riebeckites was fitted with a superposition of an Fe³⁺ and a Fe²⁺ hyperfine-field distribution, the latter one primarily characterizing the Fe²⁺ (M1) cations. The following relevant hyperfine data were calculated: H _hf=161 kOe, ΔE _Q=3.11 mm/s, and V _zz<0, all referring to the maximum-propability values. For the second riebeckite at 4.2 K, an additional distributed ferrous component could independently be resolved. The two maximum-probability hyperfine fields were found to be 189 and 98 kOe and the corresponding ΔE _Q values 3.10 and 2.67 mm/s. Both components exhibit a negative V _zz. The subspectra were attributed to M1 and M3 sites respectively. The Fe³⁺ hyperfine fields are 548+-2 kOe for both riebeckites. The different values found for the Fe³⁺ quadrupole shift 2?_Q for the two samples is explained by a different angle between the hyperfine field and the EFG's principal axis. The magnetic spectra recorded at 15 K and higher, could not be reproduced adequately with reasonable parameter values.     

High-frequency sequences and their stacking patterns: sequence-stratigraphic evidence of high-frequency eustatic cycles

A hierarchy of interpreted eustatic cyclicity in siliciclastic sedimentary rocks has a pattern of superposed cycles with frequencies in the ranges of 9–10 m.y., 1–2 m.y., 0.1–0.2 m.y., and 0.01–0.02 m.y. (second- through fifth-order cyclicity, respectively). Stratigraphic units displaying this cyclicity include composite sequences, sequences, and parasequences. On the Exxon global cycle chart, fundamental third-order cycles (1–2 m.y. average duration) stack into related groups (second-order cycles: 9–10 m.y. duration). A much larger pattern (about 200 m.y.) is interpreted as tectonically controlled eustasy probably related to sea-floor spreading rates.

One and probably two higher orders of cyclicity (fourth-order: 0.1–0.2 m.y.; and fifth-order: 0.01–0.02 m.y.) are now observed in work with well logs, cores, and outcrops in areas of very rapid deposition. These frequencies are in the range of Milankovitch cycles, and may represent part of the Milankovitch hierarchy which has been widely interpreted for cyclical units in carbonate rocks.

High-frequency (fourth-order) sequences, which form at a 0.1–0.2 m.y. cyclicity, have all the stratal attributes of conventional sequences, including constituent parasequences and systems tracts, and play a dominant role controling reservoir, source, and sealing rock distribution. A consistent hierarchy of stratigraphy is observed. Parasequences (probable fifth-order cyclicity) stack into sets to form systems tracts in fourth-order sequences. Groups (sets) of fourth-order sequences are deposited between major third-order boundaries within third-order composite sequences. Sequences in these sets stack in prograding and backstepping patterns to form third-order lowstand, transgressive, and highstand sequence sets.

Third-order sequence boundaries are marked by greater basinward shifts in facies, by larger more widespread incised valleys, and by more extensive onlap than are fourth-order sequence boundaries. Third-order condensed sections commonly are widespread, faunally rich, and widely correlated biozone and mapping markers. Fourth-order sequence analysis helps to understand reservoir, source, and seal distribution at the play and prospect scale. An example from the Gulf of Mexico is discussed.     

Solar shield: forecasting and mitigating space weather effects on high-voltage power transmission systems

In this paper, central elements of the Solar Shield project, launched to design and establish an experimental system capable of forecasting the space weather effects on high-voltage power transmission system, are described. It will be shown how Sun–Earth system data and models hosted at the Community Coordinated Modeling Center (CCMC) are used to generate two-level magnetohydrodynamics-based forecasts providing 1–2 day and 30–60 min lead-times. The Electric Power Research Institute (EPRI) represents the end-user, the power transmission industry, in the project. EPRI integrates the forecast products to an online display tool providing information about space weather conditions to the member power utilities. EPRI also evaluates the economic impacts of severe storms on power transmission systems. The economic analysis will quantify the economic value of the generated forecasting system. The first version of the two-level forecasting system is currently running in real-time at CCMC. An initial analysis of the system’s capabilities has been completed, and further analysis is being carried out to optimize the performance of the system. Although the initial results are encouraging, definite conclusions about system’s performance can be given only after more extensive analysis, and implementation of an automatic evaluation process using forecasted and observed geomagnetically induced currents from different nodes of the North American power transmission system. The final output of the Solar Shield will be a recommendation for an optimal forecasting system that may be transitioned into space weather operations.     

Multicomponent diffusion of a suite of tracers (HTO, Cl, Br, I, Na, Sr, Cs) in a single sample of Opalinus Clay

Diffusion experiments with HTO, ³⁶Cl⁻, Br⁻, I⁻, ²²Na⁺, ⁸⁵Sr²⁺ and ¹³⁴Cs⁺ at trace concentrations in a single sample of Opalinus Clay are modeled with PHREEQC’s multicomponent diffusion module. The model is used first in a classical approach to derive accessible porosities, geometrical factors (the ratio of pore tortuosity and constrictivity) and sorption behavior of the individual tracers assuming that the clay is homogeneous. The accessible porosity for neutral species and cations is obtained from HTO, the anion exclusion volume from ³⁶Cl⁻ and Br⁻, and the cation exchange capacity from ²²Na⁺. The homogeneous model works well for tritium, the anions and ²²Na⁺. However, the ⁸⁵Sr²⁺ and ¹³⁴Cs⁺ experiments show an early arrival of the tracer and a front-form that suggest a dual porosity structure. A model with 10% dead-end pores, containing 19% of the total exchange capacity, can satisfactorily calculate all the experimental data. The Cs⁺ diffusion model builds on a 3-site exchange model, constructed from batch sorption data. The excellent agreement of modeled and measured data contradicts earlier reports that the exchange capacity for Cs⁺ would be smaller in diffusion than in batch experiments.The geometrical factors for the anions are 1.5 times larger than for HTO, and for the cations 2-4 times smaller than for HTO. The different behavior is explained by a tripartite division of the porespace in free porewater, diffuse double layer (DDL) water, and interlayer water in montmorillonite. Differences between estimated and observed geometrical factors for cations are attributed to increased ion-pairing of the divalent cations in DDL water as a result of the low relative dielectric permittivity. Interlayer and/or surface diffusion contributes significantly to the diffusive flux of Cs⁺ but is negligible for the other solutes. The geometrical factors for anions are higher than estimated, because pore constrictions with overlapping double layers force the anions to take longer routes than HTO and the cations. Small differences among the anions can also be attributed to different ion-pairing in DDL water.     

Zn, Pb, Cu and As distribution patterns in overbank and medium-order stream sediment samples: their use in exploration and environmental geochemistry

Overbank and medium-order stream sediment samples were collected in Belgium and Luxembourg from 66 sampling locations (area of about 33,000 km²) and analysed for major and trace elements among which Zn, Pb, Cu and As. At each sampling location large bulk samples were taken, namely in the lower (normally at ≥1.5 m depth, over an interval of about 20–40 cm) and upper (normally upper 5–25 cm) parts of the overbank profiles and from the stream sediments. Furthermore, at a number of these sites, a detailed geochemical analysis of vertical overbank sediment profiles (sampling intervals of 10–20 cm) was subsequently carried out to unravel element variations through time and to help in the overall evaluation. For most sampled sections evidences such as ¹⁴C-dating and the absence of anthropogenic particles point towards a pre-industrial and often pristine origin of the lower overbank sediment samples. From the latter bulk samples, mean background concentrations were deduced. They reveal the existence of significant differences between the northern and southern part of Belgium (incl. Luxembourg) which relate to the difference in geological substrate. In the north dominantly non-lithified Quaternary and Tertiary sands, marls and clays occur while in the south Palaeozoic sandstones, shales and carbonate rocks outcrop. Consequently separate mean background values were calculated for the two areas. In the southern study area, some anomalous metal concentrations have been recorded in pre-industrial sediments. They are derived from mineralised Palaeozoic rocks, a feature which could be of interest for base metal exploration. In the upper overbank and stream sediments, in general, higher heavy metal and As contents were recorded with highest values in areas with metal mining, metal melting and cokes treatment industries. By comparing the trace element concentrations of the upper overbank or stream sediment samples with the concentrations detected in the lower overbank samples at each of the sampling locations, and by evaluating the vertical distribution patterns where available, the degree of pollution of the alluvial plain and the present-day stream sediments can be assessed. From this exercise, it is clear that highest pollution occurs in the northern part of Belgium, which relates to its high population density and industrial development.     

Weed species diversity on arable land of the dryland areas of central Tanzania: impacts of continuous application of traditional tillage practices

This paper presents findings from a study that assessed influence of continuous application of a particular traditional tillage practice on weed species richness, diversity and composition and identifies weed species with positive benefits to the communities in semi-arid areas of Mpwapwa district, central Tanzania. In this area farmers apply three different traditional tillage practices which are no-till (NT), shallow tillage (ST) and Ridging System (RT). A total of 36 farm fields were surveyed in 2006/2007 cropping season where 63 weed species from 26 families were identified. Analysis of variance indicated significant differences between practices (p < 0.05), with NT practice having highest weed species richness and diversity. Among the five more prevalent weed species appearing, Bidens lineariloba was observed to exist in all the three practices. Community representatives during focus group discussions indicated 9 weed species out of 63 identified to have beneficial uses. These species are Cleome hirta, Amaranthus graecizans, Bidens lineoriloba, Bidens pilosa, Dactyloctenium aegyptium, Launaea cornuta, Heteropogon contortus, Tragus berteronianus and Trichodesma zeylanicum. Their main uses include leaf-vegetable, medicines, fodder and materials for thatching. From this study NT has highest weed species richness and diversity which therefore suggests that much more time is needed for weeding in this practice compared to other practice which was the farmers’ concern. It was also noted that although weed species have negative effects in crop production and production costs, they still play a vital role in food security and for the health of different people in marginal areas as well as for the complete ecosystem including micro and macrofauna.