Guidelines for the good practice of surface wave analysis: a product of the InterPACIFIC project

Surface wave methods gained in the past decades a primary role in many seismic projects. Specifically, they are often used to retrieve a 1D shear wave velocity model or to estimate the V_S,30 at a site. The complexity of the interpretation process and the variety of possible approaches to surface wave analysis make it very hard to set a fixed standard to assure quality and reliability of the results. The present guidelines provide practical information on the acquisition and analysis of surface wave data by giving some basic principles and specific suggestions related to the most common situations. They are primarily targeted to non-expert users approaching surface wave testing, but can be useful to specialists in the field as a general reference. The guidelines are based on the experience gained within the InterPACIFIC project and on the expertise of the participants in acquisition and analysis of surface wave data.     

High‐resolution synchrotron X‐ray fluorescence investigation of calcite coralloid speleothems: Elemental incorporation and their potential as environmental archives

Synchrotron high‐resolution and micro‐X‐ray fluorescence elemental mapping of two coeval coralloid speleothems from Lamalunga Cave (Italy) are complemented with petrographic, morphological and microstratigraphic studies. The importance of these speleothems relies on their direct and indirect association with a complete Neanderthal skeleton (‘Altamura Man’) found inside the cave. The coralloids grew discontinuously between 64·6 ka and the Holocene and reveal exceptionally high concentrations of Mg, Sr and Si, particularly on convex surfaces, where evaporation is more intense. The incorporation of trace elements depends on several factors including location, shape and geometrical evolution during their growth, as well as climate and environmental parameters. This resulted in calcite precipitation with Sr compositions from 100 to 1200 ppm and an average concentration of 7000 ppm Mg. An unusually high Si content (up to 16%) is possibly derived from volcanic ash transported as particulate and in solution inside the cave. The most common fabrics observed consist of non‐fluorescent elongated columnar calcite forming clean isopachous bands and fluorescent fibre‐like crystals associated with laminated, lenticular bands high in Sr, Mg and Si. Variability in Sr, Mg and Si concentrations appears to induce fabric changes in the coralloids. Elongation and lattice distortion of the crystals was found to coincide with high Mg concentrations. The transition from compact elongated to open to fibre‐like, is here interpreted as due to high concentrations of Si and Sr, which are preferentially incorporated in the speleothem at crystal boundaries and intra‐laminae. It is here inferred that coralloid fabric changes and their elemental content potentially record local rainfall variations through time, with the clean compact calcite marking high infiltration and open fibre‐like and micrite fabrics recording dry periods.     

Estimating the expansion of urban areas and urban heat islands (UHI) in Ghana: a case study

Natural Hazards - This research is focused on identifying urban sprawl pattern and extent in two rapidly growing major Ghanaian cities (Accra and Kumasi) and how urban expansion affected heat...     

Spatial patterning of water quality in Biscayne Bay, Florida as a function of land use and water management

An objective classification analysis was performed on a water quality data set from 25 sites collected monthly during 1994-2003. The water quality parameters measured included: TN, TON, DIN, NH4+, NO3-, NO2-, TP, SRP, TN:TP ratio, TOC, DO, CHL A, turbidity, salinity and temperature. Based on this spatial analysis, Biscayne Bay was divided into five zones having similar water quality characteristics. A robust nutrient gradient, driven mostly by dissolved inorganic nitrogen, from alongshore to offshore in the main Bay, was a large determinant in the spatial clustering. Two of these zones (Alongshore and Inshore) were heavily influenced by freshwater input from four canals which drain the South Dade agricultural area, Black Point Landfill, and sewage treatment plant. The North Bay zone, with high turbidity, phytoplankton biomass, total phosphorus, and low DO, was affected by runoff from five canals, the Munisport Landfill, and the urban landscape. The South Bay zone, an embayment surrounded by mangrove wetlands with little urban development, was high in dissolved organic constituents but low in inorganic nutrients. The Main Bay was the area most influenced by water exchange with the Atlantic Ocean and showed the lowest nutrient concentrations. The water quality in Biscayne Bay is therefore highly dependent of the land use and influence from the watershed.     

Magnetic indicator of global paleoclimate cycles in Siberian loess–paleosol sequences

The loess–paleosol sequences of China, Siberia, Alaska and many other regions, along with lake sediments and glaciers, provide the only accurate paleoclimatic terrestrial records for intervals of thousands to hundreds of thousand years. The frequency dependence (FD) of magnetic susceptibility (MS) in such sequences has become the leading parameter for analyzing climatic change and Milankovitch (astronomical) periodicity in Siberian sequences; it is always higher in soil horizons than in loess. The enhanced FD parameter in soils is associated with ferromagnetic minerals, mostly magnetite, produced during pedogenesis. The MS and FD parameters of 670 samples from five sections in Siberia are reported here. Inter-section correlation is used to produce a combined FD time series for the studied sections. Chronological control is established by absolute dating and stratigraphic correlation. Spectral analysis of the FD time series reveals the presence of Milankovitch signals at ～100 kyr (eccentricity), ～40 kyr (obliquity) and ～23 kyr (precession) and demonstrates that Siberian loess–paleosol sequences are excellent continental recorders of long-term paleoclimatic changes. This suggests that the FD parameter can potentially be used more widely for evaluation of climate periodicity in loess/paleosol sequences in other parts of the world.     

Using tracer tests and hydrological observations to evaluate effects of tunnel drainage on groundwater and surface waters in the Northern Apennines (Italy)

The impact of a railway tunnel on groundwater and surface waters in the Northern Apennines (Italy) was demonstrated and characterised by multi-tracer tests and hydrological observations. The 15-km-long Firenzuola tunnel crosses turbidite marls and sandstones previously not considered as aquifers. During the drilling, water inrushes occurred at fracture zones, and the tunnel still continues to drain the aquifer. The water table dropped below the level of the valleys, and gaining streams transformed into losing streams or ran completely dry, as did many springs, causing severe damage to the aquatic fauna and other elements of the ecosystem. Two multi-tracer tests, each using uranine and sulforhodamine G, were carried out in two impacted catchments in order to confirm and quantify the stream–aquifer–tunnel interrelations. The results proved connection between losing streams and numerous water inlets in the tunnel, with maximum linear distances of 1.4 km and velocities up to 135 m/d. Several of the demonstrated flowpaths pass under previous groundwater divides (mountain ridges), proving that the tunnel has completely modified the regional flow system. Water balance estimations demonstrate that the observed water losses cannot be explained by climate change but can largely be attributed to the tunnel drainage.     

Architecture and recognition criteria of ancient shelf ridges; an example from Campanian Almond Formation in Hanna Basin,USA

Shelf ridges are sedimentary bodies formed on the continental shelf due to transgressive reworking (tidal or storm) of lowstand deposits. Common on modern shelves, they are under‐represented in the geological record due to a lack of recognition criteria and facies model. This article proposes a new facies and architectural model for shelf ridges, linked to their inception–evolution–abandonment cycle and the process regime of the basin. The model is mainly based on new outcrop data and interpretations from three sandstone bodies of the Almond Formation, an overall transgressive interval during the infill of the Campanian Western Interior Seaway. Building from the case study, and ancient and modern examples, six characteristics are proposed for the recognition of ancient shelf ridges. Shelf ridges: (i) are encased between thick marine mudstone intervals; (ii) have a basal unconformity that erodes into marine muds or into the remnants of a previous shoreline; (iii) have a non‐erosional upper boundary that transitions into marine muds; (iv) are characterized by clean and well‐sorted sandstones, often cross‐bedded; (v) contain fully marine ichnofauna; and (vi) present compound architectures with large accretion surfaces and lower order structures. Although shelf ridges have been described in previous studies as generated exclusively by either tidal or storm currents, it is clear, from modern examples and the case study, that these two processes can be recorded and preserved in a single shelf ridge. The stratigraphy of these sandstone bodies is therefore much more complex than previously recognized, bearing the signature of changing tidal and storm intensity through time. Because they are developed during transgressions, shelf ridges are commonly subject to strong changes in process regime as sea‐level changes can easily affect the oceanographic conditions and the morphology of the basin. For this reason, shelf ridges can provide the best record of shelf process variability during transgressions.     

DNA damage in the gill cells of the marine scallop Mizuhopecten yessoensis during anoxic stress and aerobic recovery

Anoxia-induced DNA damage in the gill cells of the marine scallop Mizuhopecten yessoensis was assessed with the alkaline comet assay (single-cell gel electrophoresis). The alkaline comet assay method for detecting DNA strand breaks and alkali labile sites in individual cells. DNA damage was determened in the scallops (M. yessoensis) gill cells. The scallops were exposed to air for 8 h showing a clear increase in the levels of DNA damage. After the air exposure, M. yessoensis were re-submersed for a period of 12 h, leading values to return to a pre-aerial exposure level. Control animals were kept immersed during the whole period. The resulting data demonstrate that natural influences, such as oxygen depletion (anoxia) in seawater, can be responsible for the induction of DNA damage. If the scallops were re-immersed in oxic conditions, the anoxically induced breaks were repaired. The main mechanisms influencing the integrity of the DNA structure are discussed in this paper.     

Global sensitivity analysis through polynomial chaos expansion of a basin-scale geochemical compaction model

We present a model-driven uncertainty quantification methodology based on sparse grid sampling techniques in the context of a generalized polynomial chaos expansion (GPCE) approximation of a basin-scale geochemical evolution scenario. The approach is illustrated through a one-dimensional example involving the process of quartz cementation in sandstones and the resulting effects on the dynamics of the vertical distribution of porosity, pressure, and temperature. The proposed theoretical framework and computational tools allow performing an efficient and accurate global sensitivity analysis (GSA) of the system states (i.e., porosity, temperature, pressure, and fluxes) in the presence of uncertain key mechanical and geochemical model parameters as well as boundary conditions. GSA is grounded on the use of the variance-based Sobol indices. These allow discriminating the relative weights of uncertain quantities on the global model variance and can be computed through the GPCE of the model response. Evaluation of the GPCE of the model response is performed through the implementation of a sparse grid approximation technique in the space of the selected uncertain quantities. GPCE is then be employed as a surrogate model of the system states to quantify uncertainty propagation through the model in terms of the probability distribution (and its statistical moments) of target system states.     

Yield and catch changes in a Mediterranean small tuna trap: a warming change effect?

Since the 17th century, the Tonnarella of Camogli, a small tuna trap, has been used to catch pelagic fish along the western coast of the Portofino Promontory (Ligurian Sea, Northwestern Mediterranean). The availability of long‐term datasets on fish yields (1950–1974 and 1996–2011), with information related to the seawater temperatures and the North Atlantic Oscillation (NAO), has allowed us to study the qualitative and quantitative changes in fish yields in the last decade and the possible relationships with the seasonal anomalies of temperature that have occurred in the Ligurian Sea. In 1950–1974, yields remained relatively constant over time (average of 35.6 ± 8.7 t·year^?1). From 1996 through 2011, yields were high (42.9 ± 15.9 t·year^?1) but inconsistent with strong annual variability in catches. The primary catches are Seriola dumerili, Auxis rochei, Trachurus spp. and Sarda sarda. Changes in species composition have occurred as well: S. dumerili, Sardinella sp. and Belone belone have appeared recently. Moreover, a significant decrease in the boreal scombroid (Scomber scombrus) and an increase of warm‐temperate carangids and other typically Southern Mediterranean species such as Coryphaena hippurus and Sphyraena viridensis, appear to be linked to the warming of the surface water layer, particularly evident in the Ligurian Sea, for the last 10 years. The analysis of this kind of trend may be a powerful tool for assessing structural changes of the pelagic fish community in the Ligurian Sea (Northwestern Mediterranean).