Field monitoring of suction in the vicinity of an urban tree: exploring termite infestation and the shading effects of tree canopy

Acta Geotechnica - The objective of this short communication is to explore spatial distribution of soil suction in the vicinity of an urban tree considering effects of termite infestation and also...     

Biopolymer-Based Nanocomposites for Removal of Cr(VI) from Aqueous Systems: A Review

Hexavalent chromium Cr(VI) has emerged as a contaminant of prime concern for the environmentalists because of its improper disposal by tannery, dye, and electroplating industries. Adsorption is the most exploited method for its removal from industrial wastewater because of its high removal efficiency even at low Cr(VI) concentration, minimal sludge, and ease of regeneration. In recent years, several adsorbents of biological origin such as plants, algae, fungi, and bacteria have been explored for Cr(VI) remediation. This review comprehends the recent studies involving usage of biopolymer-based nano-composites with respect to its adsorption mechanisms, adsorption capacities, isotherms, and kinetics. The conventional abiotic and biotic techniques for removal of Cr(VI) are also discussed with a comparative insight of their adsorption capacity and removal efficiency. Nano-biocomposites integrate the functional properties of both nanoparticles and biopolymers, which make them efficient biosorbents. Nano-biocomposites offer a large surface area, reduced particle loss, minimal particle agglomeration on the surface, and high stability. Common kinetic models among the nano-biocomposites,  and various equilibrium models are also analyzed to understand the mode of adsorption and associated factors. These materials are mostly found to follow monolayer adsorption with ion exchange, electrostatic interaction, and surface complexation as major players in the process.     

Progress in Remediation of Groundwater at Petroleum Sites in California

Quantifying the overall progress in remediation of contaminated groundwater has been a significant challenge. We utilized the GeoTracker database to evaluate the progress in groundwater remediation from 2001 to 2011 at over 12,000 sites in California with contaminated groundwater. This paper presents an analysis of analytical results from over 2.1 million groundwater samples representing at least $100 million in laboratory analytical costs. Overall, the evaluation of monitoring data shows a large decrease in groundwater concentrations of gasoline constituents. For benzene, half of the sites showed a decrease in concentration of 85% or more. For methyl tert‐butyl ether (MTBE), this decrease was 96% and for TBE, 87%. At remediation sites in California, the median source attenuation rate was 0.18/year for benzene and 0.36/year for MTBE, corresponding to half‐lives of 3.9 and 1.9 years, respectively. Attenuation rates were positive (i.e., decreasing concentration) for benzene at 76% of sites and for MTBE at 85% of sites. An evaluation of sites with active remediation technologies suggests differences in technology effectiveness. The median attenuation rates for benzene and MTBE are higher at sites with soil vapor extraction or air sparging compared with sites without these technologies. In contrast, there was little difference in attenuation rates at sites with or without soil excavation, dual phase extraction, or in situ enhanced biodegradation. The evaluation of remediation technologies, however, did not evaluate whether specific systems were well designed or implemented and did not control for potential differences in other site factors, such as soil type.     

Pre-processing of TerraSAR-X Data for Speckle Removal: An Approach for Performance Evaluation

Measures to select despeckling filter to remove speckles from TerraSAR-X image have been evaluated for an area having varied land cover classes. Gamma, Lee, Sigma, Mean, Median and Frost filters were applied in different window sizes. These images are visually compared and four parameters viz. Noise Mean Value (NMV), Noise Variance (NV), Mean Square Difference (MSD) and Equivalent Numbers of Looks (ENL) are calculated. These parameters were well implemented to compare results of various despeckling filters on TerraSAR-X image recorded in high resolution spot mode and checked for the constraints. Median 7x7 filter was found most suitable among other filters to despeckle the images.     

Drinking water quality in villages of southwestern Haryana,India: assessing human health risks associated with hydrochemistry

The chemical quality of groundwater of western Haryana, India was assessed for its suitability for drinking purposes. A total of 275 water samples were collected from deep aquifer based hand-pumps situated in 37 different villages/towns of Bhiwani region. The water samples were analyzed for different physico-chemical properties, e.g., pH, total dissolved solids (TDS), total harness (TH), total alkalinity (TA), calcium, magnesium, carbonate, bicarbonate, sulphate, chloride and fluoride concentrations. In this study, the average TDS content was greater ranging 1,692 (Bhiwani block) to 2,560 mg l⁻¹ (Siwani block), and other important parameters of water, e.g., TA (442–1,232 mg l⁻¹), TH (437–864 mg l⁻¹) and bicarbonate (554–672 mg l⁻¹), were also higher than maximum permissible limit by WHO or BIS. The fluoride appeared as a major problem of safe drinking water in this region. We recorded greater fluoride concentration, i.e., 86.0 mg l⁻¹ from Motipura village that is highest fluoride level ever recorded for Haryana state. The average fluoride concentration ranged between 7.1 and 0.8 mg l⁻¹ in different blocks of western Haryana. On the basis of fluoride concentration, Siwani block showed the maximum number of water samples (84% of total collected samples) unsuitable for drinking purposes (containing fluoride >1.5 mg l⁻¹) followed by Charki Dadri block (58%), Bhiwani block (52%), Bawani Khera block (33%) and Loharu block (14%). This study clearly suggest that some health deteriorating chemicals in drinking water were at dangerous level and; therefore, water quality could be a major health threat for local residents of western Haryana. The high fluoride level in drinking water has posed some serious dental health risks in local residents.     

Distribution of butyltins in the waters and sediments along the coast of India

Water and surface sediment samples were analyzed for butyltins (TBT, DBT, MBT) from various ports along the east and west coast of India. The total butyltin (TB) in water samples varied between ∼1.7 and 342 ng Sn l⁻¹, whereas for sediments it varied between below detection limit to 14861 ng Sn g⁻¹ dry weight of sediment. On an average Chennai port recorded the highest level of butyltins in the sediments while Paradip recorded the highest level of butylins in the waters. A fairly good relationship between the TB in the sediment and overlying water samples, as well as between organic carbon and TB, implicates the importance of adsorption/desorption process in controlling the levels of TBT in these port areas. In India the data on organotin pollution is very sparse; most of the port areas have been surveyed for butyltins for the first time during this study.     

Static deformation of an orthotropic multilayered elastic half-space by two-dimensional surface loads

The transfer matrix approach is used to solve the problem of static deformation of an orthotropic multilayered elastic half-space by two-dimensional surface loads. The general problem is decoupled into two independent problems. The antiplane strain problem and the plane strain problem are considered in detail. Integral expressions for displacements and stresses at any point of the medium due to a normal line load and a shear line load, acting parallel to a symmetry axis, are obtained. In the case of a uniform half-space, closed form analytic expressions for displacements and stresses are derived. The procedure developed is quite easy and convenient for numerical computations.     

Deformation of an elastic layer coupling in different ways to a base due to a very long vertical strike-slip dislocation

The closed-form analytic expressions for the displacement and stresses at any point of an elastic layer lying over a base due to a very long vertical strike-slip dislocation are obtained. The interface between the layer and the base is assumed to be either ‘smooth-rigid’ or ‘rough-rigid’ or ‘welded’. The variations of displacement and stresses with the horizontal distance from the fault for different types of coupling of the layer with the base have been studied. It is found that the displacement for ‘welded interface’ lies between the displacements due to ‘smooth rigid’ and ‘rough-rigid’ interfaces for different positions of the observer and different values of the ratio of rigidities of the layer and half-space.     

Resourcesat-1 data quality evaluation system

In continuation of IRS-1C/1D mission, Resourcesat mission was planned for integrated land and water resource management. Resourcesat was launched on 17 October 2003. This satellite carries three multi-spectral cameras with variable swath and different spatial resolution. Data quality evaluation (DQE) system characterizes payload and platform performance and its impact on radiometric and geometric accuracies achieved on user product during initial and operational phase. DQE system is software system where each parameter package is integrated in DQE scheduler, which automates and facilitates the execution procedure.