Uplift at thermo-mechanically coupled ocean–continent transforms: Modeled at the Senja Fracture Zone, southwestern Barents Sea

 Estimates of uplift at ocean–continent transform margins vary significantly between models incorporating both thermal conduction and viscous coupling across the transform and models taking only one of these processes into account. More heat is predicted to be conducted and advected into the continental lithosphere in combined models than in conductive models. Nevertheless, tectonic uplift predicted by the combined models is only half that predicted conductive models. This is because viscous coupling implies crustal thinning close to the transform. The form and amplitude of uplift in the combined models agree well with erosion estimates along a seismic transect across the Senja shear margin, in the southwestern Barents Sea. Received: 31 January 1995 / Revision received: 20 July 1995     

Assessing the institutional capacity to adapt to climate change: a case study in the Cambodian health and water sectors

Institutional capacity is an important element for climate change adaptation (CCA) and the development of such capacity is a great challenge in a Least Developed Country like Cambodia where resources are limited. An important first step to increasing capacity is via an understanding of the level of existing capacity; future priorities can then be subsequently identified. This study aimed to assess the capacity of organizations to implement climate change activities in Cambodia in order to provide such a basis for building capacity. Four elements of capacity were investigated in this research: (1) financial resources, (2) cooperation and coordination of stakeholders, (3) availability and quality of information on vulnerability and adaptation to climate change, and (4) the level of understanding of climate change vulnerability and adaptation. The data were collected through semistructured interviews with a wide range of government and non-government informants across a number of sectors. Results of the study showed that informants perceived capacity for CCA to be very constrained, especially in terms of financial resources and cooperation, and addressing these factors was ranked as the highest climate change capacity priority. Institutional capacity constraints were considered to relate more generally to weak governance of CCA. In light of our research findings, the absence of local higher education institutions in CCA activities should be addressed. The support of such institutions would provide an important mechanism to progress both capacity development as well as partnerships and coordination between different types of organizations and relevant sectors.

Policy relevance

Capacity for CCA within Cambodian health and water sectors was perceived to be very constrained across a range of interdependent factors. Increasing funding was ranked as the highest priority for building capacity for CCA; however, governance factors such as ‘improved cooperation’ were also ranked highly. Improving stakeholders' awareness of the availability of adaptation funds and resources, and their responsiveness to funding criteria, is an important implication of our research, as is improving the mobilization of local resources and the private sector. To address the issue of weak cooperation among stakeholders, improving the coordination function of the National Climate Change Committee (NCCC) regarding stakeholder engagement and capacity building is crucial. Ensuring that CCA activities are based on sound information and knowledge from across different disciplines and, importantly, include the perspectives of vulnerable people themselves, ultimately underpins and supports the realization of the above priorities.     

Ccd Photometry of the Neglected Contact Binaries V344 Lac and V1191 Cyg

New photoelectric and CCD observations of the eclipsing contact binary systems V344 Lac and V1191 Cyg are presented and analyzed. All available times of minimum light were used to study period changes of the systems and determine up-to-date ephemerides. The orbital period of V1191 Cyg is found to be increasing at a very fast rate. The photometric elements were determined using the new light curve, radial-velocity curve and broadening function fitting code ROCHE.     

Light-Time Effect in the Eclipsing Binaries GO Cyg, GW Cep, AR Aur and V505 Sgr

Orbital period changes of the eclipsing binaries GO Cyg and GW Cep are explained by the light-time effect for the first time. New minima of the eclipsing binary AR Aur improve the predicted light-time orbit. The light-time orbit with the quadratic ephemeris of the binary matches the new observations of V505 Sgr better than the linear one. As the light-time effect fits in corresponding O − C diagrams of all four systems have been reaching extreme values, the observations of minima times in forthcoming years are highly desirable.     

The gold content of volcanogenic massive sulfide deposits

Volcanogenic massive sulfide deposits contain variable amounts of gold, both in terms of average grade and total gold content, with some VMS deposits hosting world-class gold mines with more than 100?t Au. Previous studies have identified gold-rich VMS as having an average gold grade, expressed in g/t, exceeding the total abundance of base metals, expressed in wt.%. However, statistically meaningful criteria for the identification of truly anomalous deposits have not been established. This paper presents a more extensive analysis of gold grades and tonnages of 513 VMS deposits worldwide, revealing a number of important features in the distribution of the data. A large proportion of deposits are characterized by a relatively low gold grade (<2?g/t), with a gradual decrease in frequency towards maximum gold grades, defining a log-normal distribution. In the analysis presented in this paper, the geometric mean and geometric standard deviation appear to be the simplest metric for identifying subclasses of VMS deposits based on gold grade, especially when comparing deposits within individual belts and districts. The geometric mean gold grade of 513 VMS deposits worldwide is 0.76?g/t; the geometric standard deviation is +2.70?g/t Au. In this analysis, deposits with more than 3.46?g/t Au (geometric mean plus one geometric standard deviation) are considered auriferous. The geometric mean gold content is 4.7?t Au, with a geometric standard deviation of +26.3?t Au. Deposits containing 31?t Au or more (geometric mean plus one geometric standard deviation) are also considered to be anomalous in terms of gold content, irrespective of the gold grade. Deposits with more than 3.46?g/t Au and 31?t Au are considered gold-rich VMS. A large proportion of the total gold hosted in VMS worldwide is found in a relatively small number of such deposits. The identification of these truly anomalous systems helps shed light on the geological parameters that control unusual enrichment of gold in VMS. At the district scale, the gold-rich deposits occupy a stratigraphic position and volcanic setting that commonly differs from other deposits of the district possibly due to a step change in the geodynamic and magmatic evolution of local volcanic complexes. The gold-rich VMS are commonly associated with transitional to calc-alkaline intermediate to felsic volcanic rocks, which may reflect a particularly fertile geodynamic setting and/or timing (e.g., early arc rifting or rifting front). At the deposit scale, uncommon alteration assemblages (e.g., advanced argillic, aluminous, strongly siliceous, or potassium feldspar alteration) and trace element signatures may be recognized (e.g., Au?CAg?CAs?CSb ± Bi?CHg?CTe), suggesting a direct magmatic input in some systems.     

Influence of dissolution/reprecipitation reactions on metamorphic greenschist to amphibolite facies mica 40Ar/39Ar ages in the Longmen Shan (eastern Tibet)

Linking ages to metamorphic stages in rocks that have experienced low‐ to medium‐grade metamorphism can be particularly tricky due to the rarity of index minerals and the preservation of mineral or compositional relicts. The timing of metamorphism and the Mesozoic exhumation of the metasedimentary units and crystalline basement that form the internal part of the Longmen Shan (eastern Tibet, Sichuan, China), are, for these reasons, still largely unconstrained, but crucial for understanding the regional tectonic evolution of eastern Tibet. In situ core‐rim ⁴⁰Ar/³⁹Ar biotite and U–Th/Pb allanite data show that amphibolite facies conditions (~10–11 kbar, 530°C to 6–7 kbar, 580°C) were reached at 210–180 Ma and that biotite records crystallization, rather than cooling, ages. These conditions are mainly recorded in the metasedimentary cover. The ⁴⁰Ar/³⁹Ar ages obtained from matrix muscovite that partially re‐equilibrated during the post peak‐P metamorphic history comprise a mixture of ages between that of early prograde muscovite relicts and the timing of late muscovite recrystallization at c. 140–120 Ma. This event marks a previously poorly documented greenschist facies metamorphic overprint. This latest stage is also recorded in the crystalline basement, and defines the timing of the greenschist overprint (7 ± 1 kbar, 370 ± 35°C). Numerical models of Ar diffusion show that the difference between ⁴⁰Ar/³⁹Ar biotite and muscovite ages cannot be explained by a slow and protracted cooling in an open system. The model and petrological results rather suggest that biotite and muscovite experienced different Ar retention and resetting histories. The Ar record in mica of the studied low‐ to medium‐grade rocks seems to be mainly controlled by dissolution–reprecipitation processes rather than by diffusive loss, and by different microstructural positions in the sample. Together, our data show that the metasedimentary cover was thickened and cooled independently from the basement prior to c. 140 Ma (with a relatively fast cooling at 4.5 ± 0.5°C/Ma between 185 and 140 Ma). Since the Lower Cretaceous, the metasedimentary cover and the crystalline basement experienced a coherent history during which both were partially exhumed. The Mesozoic history of the Eastern border of the Tibetan plateau is therefore complex and polyphase, and the basement was actively involved at least since the Early Cretaceous, changing our perspective on the contribution of the Cenozoic geology.     

Highly reducing conditions during core formation on Mercury: Implications for internal structure and the origin of a magnetic field

The high average density and low surface FeO content of the planet Mercury are shown to be consistent with very low oxygen fugacity during core segregation, in the range 3-6 log units below the iron-wüstite buffer. These low oxygen fugacities, and associated high metal content, are characteristic of high-iron enstatite (EH) and Bencubbinite (CB) chondrites, raising the possibility that such materials may have been important building blocks for this planet. With this idea in mind we have explored the internal structure of a Mercury sized planet of EH or CB bulk composition. Phase equilibria in the silicate mantle have been modeled using the thermodynamic calculator p-MELTS, and these simulations suggest that orthopyroxene will be the dominant mantle phase for both EH and CB compositions, with crystalline SiO₂ being an important minor phase at all pressures. Simulations for both compositions predict a plagioclase-bearing “crust” at low pressure, significant clinopyroxene also being calculated for the CB bulk composition. Concerning the core, comparison with recent high pressure and high temperature experiments relevant to the formation of enstatite meteorites, suggest that the core of Mercury may contain several wt.% silicon, in addition to sulfur. In light of the pressure of the core-mantle boundary on Mercury (∼7 GPa) and the pressure at which the immiscibility gap in the system Fe-S-Si closes (∼15 GPa) we suggest that Mercury’s core may have a complex shell structure comprising: (i) an outer layer of Fe-S liquid, poor in Si; (ii) a middle layer of Fe-Si liquid, poor in S; and (iii) an inner core of solid metal. The distribution of heat-producing elements between mantle and core, and within a layered core have been quantified. Available data for Th and K suggest that these elements will not enter the core in significant amounts. On the other hand, for the case of U both recently published metal/silicate partitioning data, as well as observations of U distribution in enstatite chondrites, suggest that this element behaves as a chalcophile element at low oxygen fugacity. Using these new data we predict that U will be concentrated in the outer layer of the mercurian core. Heat from the decay of U could thus act to maintain this part of Mercury’s core molten, potentially contributing to the origin of Mercury’s magnetic field. This result contrasts with the Earth where the radioactive decay of U represents a negligible contribution to core heating.