A lunar rock of deep crustal origin: sample 76535

Lunar sample 76535 is a coarse-grained troctolitic granulite exhibiting a texture indicative of long annealing times. It is composed of homogeneous crystals of plagioclase (58 per cent, An₉₆), olivine (37 per cent, Fo₈₈) and bronzite (4 per cent, En₈₆).Chromian spinel-bronzite-diopside (Wo₄₆En₅₀Fs₄) symplectic intergrowths commonly occur along olivine-plagioclase boundaries and as tiny inclusions within olivine grains. These symplectites apparently formed by a reaction of the type:

$\text{OI + An + Chromite → Opx + Cpx + Al-Mg-chromite}$

. The reaction is related to the experimentally determined reaction

$\text{OI + An = Opx + Cpx + Sp}$

of Kushiro and Yoder (1966). The enstatite content of the diopside coexisting with the bronzite indicates equilibration at about 1000°C. Thermodynamic calculations for 1000°C indicate that the symplectites formed at a minimum pressure of about 0.6 kb. Low alumina contents of the pyroxenes indicate equilibration near this minimum pressure.Clusters of the same assemblage found in the symplectic intergrowths, but containing accessory metal, troilite, Ca-phosphates, baddeleyite, plagioclase and/or K-feldspar occur sporadically throughout the rock. These apparent late stage products crystallized in the low temperature-high pressure region discussed above.Phase relations of co-existing metal phases indicate that the rock cooled at a few tens of degrees/my, corresponding to depths of 10–20 km below the lunar surface, in agreement with the above pressure estimate.We infer that 76535 represents an original cumulate deposited at a depth between about 10 and 30 km. The last liquid crystallized in the relatively high pressure-low temperature field opx + cpx + Al-Mg-chromite. Cooling was extremely slow and accompanied by extensive chemical and textural re-equilibration. Reaction to form the symplectites occurred during the late stages of re-equilibration.     

Assessment of perfluorinated compounds (PFCs) in plasma of bottlenose dolphins from two southeast US estuarine areas: relationship with age, sex and geographic locations

Plasma PFCs were measured in 157 bottlenose dolphins (Tursiops truncatus) sampled from two US southeast Atlantic sites (Charleston (CHS), SC and Indian River Lagoon (IRL), FL) during 2003-2005. ∑PFCs, perfluoroalkyl carboxylates (∑PFCAs), perfluoroalkyl sulfonates (∑PFSAs) and individual compounds were significantly higher in CHS dolphins for all age/sex categories compared to IRL dolphins. Highest ∑PFCs concentrations occurred in CHS juvenile dolphins (2340 ng/g w.w.); significantly higher than found in adults (1570 ng/g w.w. males; 1330 ng/g w.w. females). ∑PFCAs were much greater in CHS dolphins (≈ 21%) compared to IRL dolphins (≈ 7%); ∑PFSAs were 79% in CHS dolphins versus 93% in IRL dolphins. PFOS, the dominant compound, averaged 72% and 84%, respectively, in CHS and IRL dolphins. Decreasing PFC levels occurred with age on the bioaccumulation of PFCs in both sites. These observations suggest PFC accumulation in these two dolphin populations are influenced by site-specific exposures with significantly higher levels in CHS dolphins.     

Symplectic integrators for long-term integrations in celestial mechanics

We discuss the use of symplectic integration algorithms in long-term integrations in the field of celestial mechanics. The methods' advantages and disadvantages (with respect to more common integration methods) are discussed. The numerical performance of the algorithms is evaluated using the 2-body and circular restricted 3-body problems. Symplectic integration methods have the advantages of linear phase error growth in the 2-body problem (unlike most other methods), good conservation of the integrals of the motion, good performance for moderately eccentric orbits, and ease of use. Its disadvantages include a relatively large number of force evaluations and an inability to continuously vary the step size.     

Transport and dispersal of organic debris (peat blocks) in upland fluvial systems

This paper assesses the mechanisms and pathways by which peat blocks are eroded and transported in upland fluvial systems. Observations and experiments from the north Pennines (UK) have been carried out on two contrasting river systems. Mapping of peat block distributions and appraisal of reach‐based sediment budgets clearly demonstrates that macro‐size peat is an important stream load component. In small streams block sizes can approximate the channel width and much of the peat is transported overbank. Local ‘peat jams’ and associated mineral deposition may provide an important component of channel storage. In larger systems peat blocks rapidly move down‐channel and undergo frequent exchanges between bed and bank storage. Results of peat block tracing using painted blocks indicate that once submerged, blocks of all sizes are easily transported and blocks break down rapidly by abrasion. Vegetation and bars play an important role in trapping mobile peat. In smaller streams large block transport is limited by channel jams. Smaller blocks are transported overbank but exhibit little evidence of downstream fining. In larger rivers peat blocks are more actively sorted and show downstream reduction in size from source. A simple model relating peat block diameter (D_p) to average flow depth (d) suggests three limiting transport conditions: flotation (D_p < d), rolling (d < D_p > d/2) and deposition (D_p > d/2). Experiments demonstrate that peat block transport occurs largely by rolling and floating and the transport mechanism is probably controlled by relative flow depth (d/D_p ratio). Transport velocity varies with transport mechanism (rolling is the slowest mode) and transport lengths increase as flow depth increases. Abrasion rates vary with the transport mechanism. Rolling produces greater abrasion rates and more rounded blocks. Abrasion rates vary from 0 to 10 g m^?1 for blocks ranging in mass from 10 to 6000 g. Copyright © 2001 John Wiley & Sons, Ltd.     

Water-level fluctuations, emersion regimes, and variations of echinoid populations on a Caribbean reef flat

This paper examines fluctuations in water level over a Caribbean reef flat at Punta Galeta, Panamá. In an analysis of approximately ten years of records, the mean diurnal range of the tides was 24·5 cm and varied <2 cm from year to year. Daily mean water levels varied erratically over a range of approximately 30 cm. Monthly mean water levels fluctuated seasonally over a range of about 10 cm and were consistently higher than those at the regional tidal reference station at Cristóbal. On days with more wave action, water levels at Galeta increased relative to those at Cristóbal, suggesting that waves were ‘pumping’ water onto the reef flat. The monthly mean water levels at the two sites were not correlated, indicating that tidal data from conventional stations in deeper water cannot be extrapolated to reef flats, except as estimates of minimum potential water levels.Most of the reef flat was within 6 cm vertical span just below mean lower low water. The highest elevations within this range were exposed above water level for an average of 918 hours per year, as compared with 144 hours per year at the lowest elevation. Most exposures lasted less than 10 hours, with a modal duration of 3–5 hours; however, exposures longer than 12 hours occurred at nearly all elevations in all years. Exposures of the reef flat were most frequent between February and June and between August and November, a pattern apparently caused by a combination of seasonal oscillations of regional sea levels, the annual pattern of the solstitial tides, and waves generated by seasonal trade winds.The fluctuations in water levels apparently affected the abundances of some species of sea urchins on the reef flat. Populations of Lytechinus variegatus and Diadema antillarum declined or disappeared from the reef flat during seasons of repeated subaerial exposures, but recolonized the habitat in periods of higher water levels. Although they are reported to suffer heavy mortality during emersion, Echinometra lucunter and E. viridis did not exhibit reductions in abundance that were synchronous with the seasonal exposures of the reef flat.     

Simultaneous calibration of surface flow and baseflow simulations: a revisit of the SWAT model calibration framework

Accurate analysis of water flow pathways from rainfall to streams is critical for simulating water use, climate change impact, and contaminants transport. In this study, we developed a new scheme to simultaneously calibrate surface flow (SF) and baseflow (BF) simulations of soil and water assessment tool (SWAT) by combing evolutionary multi‐objective optimization (EMO) and BF separation techniques. The application of this scheme demonstrated pronounced trade‐off of SWAT's performance on SF and BF simulations. The simulated major water fluxes and storages variables (e.g. soil moisture, evapotranspiration, and groundwater) using the multiple parameters from EMO span wide ranges. Uncertainty analysis was conducted by Bayesian model averaging of the Pareto optimal solutions. The 90% confidence interval (CI) estimated using all streamflows substantially overestimate the uncertainty of low flows on BF days while underestimating the uncertainty of high flows on SF days. Despite using statistical criteria calculated based on streamflow for model selection, it is important to conduct diagnostic analysis of the agreement of SWAT behaviour and actual watershed dynamics. The new calibration technique can serve as a useful tool to explore the trade‐off between SF and BF simulations and provide candidates for further diagnostic assessment and model identification. Copyright © 2011 John Wiley & Sons, Ltd.     

Hydrological Outlook UK: an operational streamflow and groundwater level forecasting system at monthly to seasonal time scales

This paper describes the development of the first operational seasonal hydrological forecasting service for the UK, the Hydrological Outlook UK (HOUK). Since June 2013, this service has delivered monthly forecasts of streamflow and groundwater levels, with an emphasis on forecasting hydrological conditions over the next three months, accompanied by outlooks over longer time horizons. This system is based on three complementary approaches combined to produce the outlooks: (i) national-scale modelling of streamflow and groundwater levels based on dynamic seasonal rainfall forecasts, (ii) catchment-scale modelling where streamflow and groundwater level models are driven by historical meteorological forcings (i.e. the Ensemble Streamflow Prediction, ESP, approach), and (iii) a catchment-scale statistical method based on persistence and historical analogues. This paper provides the background to the Hydrological Outlook, describes the various component methods in detail and then considers the impact and usefulness of the product. As an example of a multi-method, operational seasonal hydrological forecasting system, it is hoped that this overview provides useful information and context for other forecasting initiatives around the world.     

Making local futures tangible—Synthesizing, downscaling, and visualizing climate change scenarios for participatory capacity building

Local in its causes and global in its impacts, climate change still poses an unresolved challenge for scientists, politicians, entrepreneurs, and citizens. Climate change research is largely global in focus, aims at enhanced understanding, and is driven by experts, all of which seem to be insufficient to anchor climate change action in regional and local contexts. We present results from a participatory scenario study conducted in collaboration with the municipality of Delta in SW British Columbia, Canada. This study applies a participatory capacity building approach for climate change action at the local level where the sources of emissions and the mechanisms of adaptation reside and where climate change is meaningful to decision-makers and stakeholders alike. The multi-scale scenario approach consists of synthesizing global climate change scenarios, downscaling them to the regional and local level, and finally visualizing alternative climate scenarios out to 2100 in 3D views of familiar, local places. We critically discuss the scenarios produced and the strengths and weaknesses of the approach applied.     

On the relationships between catchment scale and streamwater mean residence time

The relationship between streamwater mean residence time (MRT) and landscape characteristics is poorly understood. We used tritium (³H) to define our MRT. We tested the hypothesis that baseflow water MRT increases with increasing absolute catchment size at the Maimai catchments. These catchments are simple hydrologic systems relative to many catchments around the world, with uniformly wet climatic conditions, little seasonality, uniform and nearly impermeable bedrock, steep short hillslopes, shallow soils, and well‐characterized hillslope and catchment hydrology. As a result, this is a relatively simple system and an ideal location for new MRT‐related hypothesis testing. Whilst hydrologists have used ³H to estimate water age since the 1960s nuclear testing spike, atmospheric ³H levels have now approached near background levels and are often complicated by contamination from the nuclear industry. We present results for ³H sampled from our set of nested catchments in nuclear‐industry‐free New Zealand. Because of high precision analysis, near‐natural atmospheric ³H levels, and well‐characterized rainfall ³H inputs, we were able to estimate the age of young (i.e. less than 3 years old) waters. Our results showed no correlation between MRT and catchment size. However, MRT was correlated to the median sub‐catchment size of the sampled watersheds, as shown by landscape analysis of catchment area accumulation patterns. These preliminary findings suggest that landscape organization, rather than total area, is a first‐order control on MRT and points the way forward for more detailed analysis of how landscape organization affects catchment runoff characteristics. Copyright © 2003 John Wiley & Sons, Ltd.     

Geometallurgical Modeling at Olympic Dam Mine, South Australia

Modeling of geometallurgical variables is becoming increasingly important for improved management of mineral resources. Mineral processing circuits are complex and depend on the interaction of a large number of properties of the ore feed. At the Olympic Dam mine in South Australia, plant performance variables of interest include the recovery of Cu and U₃O₈, acid consumption, net recovery, drop weight index, and bond mill work index. There are an insufficient number of pilot plant trials (841) to consider direct three-dimensional spatial modeling for the entire deposit. The more extensively sampled head grades, mineral associations, grain sizes, and mineralogy variables are modeled and used to predict plant performance. A two-stage linear regression model of the available data is developed and provides a predictive model with correlations to the plant performance variables ranging from 0.65–0.90. There are a total of 204 variables that have sufficient sampling to be considered in this regression model. After developing the relationships between the 204 input variables and the six performance variables, the input variables are simulated with sequential Gaussian simulation and used to generate models of recovery of Cu and U₃O₈, acid consumption, net recovery, drop weight index, and bond mill work index. These final models are suitable for mine and plant optimization.