An Archean(?) to Paleozoic Evolution for a Garnet Peridotite Lens with Sub-Baltic Shield Affinity within the Seve Nappe Complex of Jamtland, Sweden, Central Scandinavian Caledonides

Mineralogical, isotopic, geochemical and geochronological evidencedemonstrates that the Friningen body, a garnet peridotite bodycontaining garnet pyroxenite layers in the Seve Nappe Complex(SNC) of Northern Jämtland, Sweden, represents old, certainlyProterozoic and possibly Archean, lithosphere that became incorporatedinto the Caledonian tectonic edifice during crustal subductioninto the mantle at c. 450 Ma. Both garnet peridotite and pyroxenitecontain two (M₁ and M₂) generations of garnet-bearing assemblagesseparated by the formation of two-pyroxene, spinel symplectitearound the M₁ garnet and the crystallization of low-Cr spinel_1Cin the matrix. These textures suggest initial high-pressure(HP) crystallization of garnet peridotite and pyroxenite succeededby decompression into the spinel stability field, followed byrecompression into the garnet peridotite facies. Some pyroxenitelayers appear to be characterized solely by M₂ assemblages withstretched garnet as large as several centimeters. Laser ablationmicroprobe–inductively coupled plasma mass spectrometryRe–Os analyses of single sulfide grains generally definemeaningless model ages suggesting more than one episode of Reand/or Os addition and/or loss to the body. Pentlandite grainsfrom a single polished slab of one garnet peridotite, however,define a linear array on an Re–Os isochron diagram that,if interpreted as an errorchron, suggests an Archean melt extractionevent that left behind the depleted dunite and harzburgite bodiesthat characterize the SNC. Refertilization of this mantle bymelts associated with the development of the pyroxenite layersis indicated by enriched clinopyroxene Sr–Nd isotope ratios,and by parallel large ion lithophile-enriched trace elementpatterns in clinopyroxene from pyroxenite and the immediatelyadjacent peridotite. Clinopyroxene and whole-rock model Sm–Ndages (T_DM = 1·1–2·2 Ga) indicate that fertilizationtook place in Proterozoic times. Sm–Nd garnet₂–clinopyroxene₂–wholerock ± orthopyroxene₂ mineral isochrons from three pyroxenitelayers define overlapping ages of 452·1 ± 7·5and 448 ± 13 Ma and 451 ± 43 Ma (2     

西藏纳木错地区约120kaBP以来的古植被、古气候与湖面变化

西藏纳木错湖相沉积的U系和^11C测年结果表明，湖泊沿岸的6级湖岸阶地及拔湖约48～139．2m的高位湖相沉积形成于约120ka BP以来的晚第四纪。本文根据该套湖相层的发育和其中的孢粉组合特征对纳木错地区约120ka BP以来的湖面变化与古植被、古气候变迁进行了探讨。结果表明，纳木错地区晚更新世以来经历了频繁的湖面波动、气候的冷暖与干湿变化以及森林—草原与草原植被的交替演化。其总体特征是：约115．9ka BP时，纳木错湖面最高。在116～78ka BP期间，该区气候温和凉爽或温和偏湿，植被以疏林草原与森林草原或森林的交替出现为特征，湖面经历了较大幅度的波动，但基本保持在拔湖140～88m之间。在78～53ka BP期间，该区气候干冷，植被以疏林草原为主，湖面大幅度下降，并在拔湖约36～48m之间波动。约53～32ka BP期间，气候转为温暖偏湿或温暖湿润，湖面波动于拔湖约15～28m之间，波动较为频繁。与阶地的发育相对应，该时期内包含了3次明显的暖期和湖面波动过程，区域植被主要以松、蒿、桦为主，为含一定量的冷杉的森林。其中36ka BP左右气候最温暖湿润，区域内可能出现针叶林或针阔混交林。约32～12ka BP期间，该区气候最为干冷，古植被以草原和疏林草原为主，湖面再次发生较大幅度的下降，最低可至拔湖约8m处，但通常维持在拔湖约12～17m之间。约11．8～4．2ka BP期间，气候整体较为暖湿，其中在约8．4～4．2ka BP期间气候最温暖湿润，该区可能发育针叶林或针阔混交林，湖面波动于拔湖2～9m之间，整体波动幅度较小，但波动最为频繁。区域气候对比发现，纳木错地区的冷、暖气候变化过程与整个青藏高原乃至北半球的气候变化基本是一致的，特别是阶地下切所反映的湖面退缩过程与北大西洋的Henrich冷事件之间具有很好的对应关系。     

The Role of Advective Fluid Flow and Diffusion during Localized, Solid-State Dehydration: Sondrum Stenhuggeriet, Halmstad, SW Sweden

A localized dehydration zone, Söndrum stone quarry, Halmstad,SW Sweden, consists of a central, 1 m wide granitic pegmatoiddyke, on either side of which extends a 2·5–3 mwide dehydration zone (650–700°C; 800 MPa; orthopyroxene–clinopyroxene–biotite–amphibole–garnet)overprinting a local migmatized granitic gneiss (amphibole–biotite–garnet).Whole-rock chemistry indicates that dehydration of the graniticgneiss was predominantly isochemical. Exceptions include [Y+ heavy rare earth elements (HREE)], Ba, Sr, and F, which aremarkedly depleted throughout the dehydration zone. Systematictrends in the silicate and fluorapatite mineral chemistry acrossthe dehydration zone include depletion in Fe, (Y + HREE), Na,K, F, and Cl, and enrichment in Mg, Mn, Ca, and Ti. Fluid inclusionchemistry is similar in all three zones and indicates the presenceof a fluid containing CO₂, NaCl, and H₂O components. Water activitiesin the dehydration zone average 0·36, or X_H2O = 0·25.All lines of evidence suggest that the formation of the dehydrationzone was due to advective transport of a CO₂-rich fluid witha minor NaCl brine component originating from a tectonic fracture.Fluid infiltration resulted in the localized partial breakdownof biotite and amphiboles to pyroxenes releasing Ti and Ca,which were partitioned into the remaining biotite and amphibole,as well as uniform depletion in (Y + HREE), Ba, Sr, Cl, andF. At some later stage, H₂O-rich fluids (H₂O activity >0·8)gave rise to localized partial melting and the probable injectionof a granitic melt into the tectonic fracture, which resultedin the biotite and amphibole recording a diffusion profile forF across the dehydration zone into the granitic gneiss as wellas a diffusion profile in Fe, Mn, and Mg for all Fe–Mgsilicate minerals within 100 cm of the pegmatoid dyke. KEY WORDS: charnockite; fluids; CO₂; brines; localized dehydration; Söndrum     

Wind tunnel and field testing of a simple sand catcher for sampling inhomogeneously saltating sand in desertified environments

Problems of vertical alignment and vibrations of disposable coffee cups used in a modified version of the De Ploey saltating sand catcher were solved. The new version was tested in a sediment wind tunnel. Its catches appeared linearly related to amounts of eroded sand, largely independent of wind speed and wind direction, and depended logarithmically on height. The catch efficiency may therefore be taken to be approximately independent of wind speed and direction. The instrument performed well under conditions of inhomogeneously saltating sand in a strongly desertified environment in Central Sudan. Use and results show the improved simple catcher to be easy to assemble, reproducible and cheap, suitable for multipoint use to cover all inhomogeneities in outdoor saltating sand fields.     

ESTIMATING INFILTRATION PARAMETERS FROM BASIC SOIL PROPERTIES

Infiltration data were collected on two rectangular grids with 25 sampling points each. Both experimental grids were located in tropical rain forest (Guyana), the first in an Arenosol area and the second in a Ferralsol field. Four different infiltration models were evaluated based on their performance in describing the infiltration data. The model parameters were estimated using non-linear optimization techniques. The infiltration behaviour in the Ferralsol was equally well described by the equations of Philip, Green–Ampt, Kostiakov and Horton. For the Arenosol, the equations of Philip, Green–Ampt and Horton were significantly better than the Kostiakov model. Basic soil properties such as textural composition (percentage sand, silt and clay), organic carbon content, dry bulk density, porosity, initial soil water content and root content were also determined for each sampling point of the two grids. The fitted infiltration parameters were then estimated based on other soil properties using multiple regression. Prior to the regression analysis, all predictor variables were transformed to normality. The regression analysis was performed using two information levels. The first information level contained only three texture fractions for the Ferralsol (sand, silt and clay) and four fractions for the Arenosol (coarse, medium and fine sand, and silt and clay). At the first information level the regression models explained up to 60% of the variability of some of the infiltration parameters for the Ferralsol field plot. At the second information level the complete textural analysis was used (nine fractions for the Ferralsol and six for the Arenosol). At the second information level a principal components analysis (PCA) was performed prior to the regression analysis to overcome the problem of multicollinearity among the predictor variables. Regression analysis was then carried out using the orthogonally transformed soil properties as the independent variables. Results for the Ferralsol data show that the parameters of the Green–Ampt and Kostiakov model were estimated relatively accurately (maximum R² = 0.76). For the Arenosol, use of the second information level together with PCA produced regression models with an R² value ranging from 0.38 to 0.68. For the Ferralsol, most of the variance was explained by the root content and organic matter content. In the Arenosol plot, the fractions medium and fine sand explained most of the observed variance.     

ELECTRONIC ACCELERATION-SENSITIVE GEOPHONE FOR SEISMIC PROSPECTING***

Previously ignored characteristics of the seismic recording instrument are presently experienced as limitations as more sophisticated interpretive methods using wider frequency ranges are developed to extract stratigraphic information from seismic land data for hydrocarbon and mineral exploration. Most of these limitations arise from inadequate characteristics of the first element of the seismic instrument: the geophone. A geophone does not faithfully follow the motion of the earth for higher frequencies due to poor geophone-earth coupling. This filtering effect brings about time shifts that are dependent on the frequency and the soil type. A geophone can also produce spurious outputs, brought about by the motion of the suspended part of the geophone, with a magnitude comparable to that of the desired output. The suspension is made very compliant to obtain the required sensitivity. A compliant suspension, however, gives a large sag. The geophone can therefore only be used in one position, tolerating little tilt. A compliant suspension also widens the traveling range of the movable part. Minor sensitivity changes with travel are then noticeable as nonlinearity, since the surface wave is large with respect to the reflected wave. A compliant suspension is usually realized in the form of thin, spirally shaped spring-spiders. Such suspensions exhibit transverse or rotational resonances that are in or close to the seismic frequency band. Excited by ground roll, they can produce considerable undesirable output. The novel geophone we describe is a light-weight (17 g) acceleration-sensitive transducer which gives good ground coupling and partial correction for the increasing damping in the earth with increasing frequencies. It employs internal hybrid electronics for a magnetodynamic velocity-nulling feedback system. Velocity nulling makes the movable part of the geophone virtually rigid with respect to the housing. This makes the geophone characteristics independent of the suspension. The springs used are stiff in a transverse and rotational direction so that the suspension resonances are well outside the useful frequency band. This suspension also allows the geophone to be used in any orientation while being only sensitive to the vibration component along the main axis. The feedback system makes the sensitivity flat within 1 dB from 2 Hz to 500 Hz, with a phase tolerance smaller than 5°. The geophone is robust, has no moving internal wires, employs a current output [sensitivity 1 mA/(m s^?2)] and internal gain so that the signal-to-cable-noise ratio is improved. This type of output allows parallel connection without any interaction between the geophones.     

NUMERICAL MODELLING OF STANDARD AND CONTINUOUS VERTICAL ELECTRICAL SOUNDINGS1

Analytical solutions of vertical electrical soundings (VES) have mostly been applied to groundwater exploration and monitoring groundwater quality on terrains of fairly simple geology and geomorphology on which the electrode arrays are symmetrical (e.g. Schlumberger or Wenner configurations). The sounding interpretation assumes flat topography and horizontally stratified layers. Any deviations from these simple situations may be impossible to interpret analytically. The recently developed GEA-58 geoelectrical instrument can make continuous soundings along a profile with any colinear electrode configuration. This paper describes the use of finite-difference and finite-element methods to model complex earth resistivity distributions in 2D, in order to calculate apparent resistivity responses to any colinear current electrode distribution in terrains in which the earth resistivities do not vary along the strike. The numerical model results for simple situations are compared with the analytical solutions. In addition, a pseudo-depth section of apparent resistivities measured in the field with the GEA-58 is compared with the numerical solution of a real complex resistivity distribution along a cross-section. The model results show excellent agreement with the corresponding analytical and experimental data.     

A modern oceanic hardground on the Carnegie Ridge in the eastern Equatorial Pacific

Fossil surfaces of erosion and non-deposition are common in limestone sequences from the Mesozoic in western Europe and in the Tethys and have been described under the name ‘hardgrounds’. They are of shallow water as well as of oceanic origin. A modern example in the Pacific is described in this paper. The Carnegie Ridge, an east-west trending shallow ridge between South America and the Galapagos Islands, has a central, deeper saddle where erosion has removed most of the sediment cover down to a hard chalk and chert bed (acoustic basement), and has cut intricate channel patterns on the south flank and two deep canyons on the north. The erosion has produced a karst-like relief of steep-walled channels, cliffs, and corroded chalk remnants. The floors of the channels are covered with ferromanganese oxide crusts or crust fragments over which loose sediment is being transported. In the two canyons on the north flank, this sediment consists of foraminiferal sand travelling downslope in the form of barchan dunes. All sediment down to acoustic basement has been stripped from the Carnegie Ridge crest except where it is protected behind basement ridges and pinnacles. Surface features of the eroded chalk are strongly reminiscent of features observed in Mesozoic hardgrounds. Current measurements over several days indicate a net northward movement, slow but possibly adequate to keep the sea floor free of fresh deposits. The rates, however, seem inadequate to explain the formation of the deep channels, and there is no evidence for the southward flow which is implied by the southern channel system. A process of combined carbonate dissolution and removal by the current of fresh sediment and dissolution residues can account for the required erosion in about two million years. Regional unconformities identifiable in seismic reflection profiles and dated in cores are of middle to late Pliocene age, suggesting that the formation of the erosion surface began 2-3 million years ago. Buried Miocene unconformities of local extent show that the present erosion period had minor precursors possibly related to short-lived increases in current action and carbonate dissolution.     

SEISMIC INVERSION BY A RMS BORN APPROXIMATION IN THE SPACE-TIME DOMAIN1

A new approximate method to calculate the space-time acoustic wave motion generated by an impulsive point source in a horizontally layered configuration is presented. The configuration consists of a stack of fluid layers between two acoustic half-spaces where the source and the receiver are located in the upper half-space. A distorted-wave Born approximation is introduced; the important feature of the method is the assumption of a background medium with vertical varying root-mean-square acoustic wave speed. A closed-form expression for the scattered field in space and time as a function of the contrast parameters is deduced. The result agrees closely with rigorously calculated synthetic seismograms. In the inverse scheme the wave speed and mass density can be reconstructed within a single trace. Results of the inversion scheme applied to synthetic data are shown.