Sedimentology and kinematics of a large, retrogressive growth-fault system in Upper Carboniferous deltaic sediments, western Ireland

Growth faulting is a common feature of many deltaic environments and is vital in determining local sediment dispersal and accumulation, and hence in controlling the resultant sedimentary facies distribution and architecture. Growth faults occur on a range of scales, from a few centimetres to hundreds of metres, with the largest growth faults frequently being under‐represented in outcrops that are often smaller than the scale of feature under investigation. This paper presents data from the exceptionally large outcrops of the Cliffs of Moher, western Ireland, where a growth‐fault complex affects strata up to 60 m in thickness and extends laterally for ≈ 3 km. Study of this Namurian (Upper Carboniferous) growth‐fault system enables the relationship between growth faulting and sedimentation to be detailed and permits reconstruction of the kinematic history of faulting. Growth faulting was initiated with the onset of sandstone deposition on a succession of silty mudstones that overlie a thin, marine shale. The decollement horizon developed at the top of the marine shale contact for the first nine faults, by which time aggradation in the hangingwall exceeded 60 m in thickness. After this time, failure planes developed at higher stratigraphic levels and were associated with smaller scale faults. The fault complex shows a dominantly landward retrogressive movement, in which only one fault was largely active at any one time. There is no evidence of compressional features at the base of the growth faults, thus suggesting open‐ended slides, and the faults display both disintegrative and non‐disintegrative structure. Thin‐bedded, distal mouth bar facies dominate the hangingwall stratigraphy and, in the final stages of growth‐fault movement, erosion of the crests of rollover structures resulted in the highest strata being restricted to the proximity of the fault. These upper erosion surfaces on the fault scarp developed erosive chutes that were cut parallel to flow and are downlapped by the distal hangingwall strata of younger growth faults.     

Trace element distributions in aquatic sediments of Danang – Hoian area, Vietnam

 Distribution of the trace elements Cr, Cu, Ni, Pb and Zn in surficial sediments of the river/sea environment in Danang – Hoian area (Vietnam) was investigated to examine the degree of metal pollution caused by anthropogenic activities. Point sources from domestic and industrial wastes are identified as dominant contributors of trace element accumulation. Surficial sediments of Hoian River show extremely high total concentrations of Cu (Average Concentration 295 μg/g), Ni (AC 112 μg/g), Pb (AC 396 μg/g) and Zn (AC 429 μg/g) that exceed assigned safety levels ER-M. Similarly, the sediments of Han River show high Pb (AC 188 μg/g) and Zn (AC 282 μg/g) contents. In marine sediments of Thanhbinh beach Pb is also enriched (138 μg/g) above guideline levels. In contrast the sediments of the Cude River are dominated by trace element concentrations close to background values. Received: 17 December 1998 · Accepted: 6 May 1999     

Effect of common point selection on coordinate transformation parameter determination

The use of satellite positioning techniques commonly requires a transformation from a Conventional Terrestrial coordinate system to a Geodetic coordinate system, or vice versa. For such a transformation, the main problem is the determination of transformation parameters between these coordinate systems. The transformation parameters are estimated by a least-squares process using “common” points, i.e., those points whose coordinates are known in both systems. Therefore, the precision of so estimated transformation parameters is closely related to certain characteristics of the common points. In this contribution, we have formulated some theoretical relations between the transformation parameters and the number and the distribution of common points, and corroborated the theoretical results numerically, using a simulated geodetic network.     

On the use of IPCC-class models to assess the impact of climate on Living Marine Resources

The study of climate impacts on Living Marine Resources (LMRs) has increased rapidly in recent years with the availability of climate model simulations contributed to the assessment reports of the Intergovernmental Panel on Climate Change (IPCC). Collaboration between climate and LMR scientists and shared understanding of critical challenges for such applications are essential for developing robust projections of climate impacts on LMRs. This paper assesses present approaches for generating projections of climate impacts on LMRs using IPCC-class climate models, recommends practices that should be followed for these applications, and identifies priority developments that could improve current projections. Understanding of the climate system and its representation within climate models has progressed to a point where many climate model outputs can now be used effectively to make LMR projections. However, uncertainty in climate model projections (particularly biases and inter-model spread at regional to local scales), coarse climate model resolution, and the uncertainty and potential complexity of the mechanisms underlying the response of LMRs to climate limit the robustness and precision of LMR projections. A variety of techniques including the analysis of multi-model ensembles, bias corrections, and statistical and dynamical downscaling can ameliorate some limitations, though the assumptions underlying these approaches and the sensitivity of results to their application must be assessed for each application. Developments in LMR science that could improve current projections of climate impacts on LMRs include improved understanding of the multi-scale mechanisms that link climate and LMRs and better representations of these mechanisms within more holistic LMR models. These developments require a strong baseline of field and laboratory observations including long time series and measurements over the broad range of spatial and temporal scales over which LMRs and climate interact. Priority developments for IPCC-class climate models include improved model accuracy (particularly at regional and local scales), inter-annual to decadal-scale predictions, and the continued development of earth system models capable of simulating the evolution of both the physical climate system and biosphere. Efforts to address these issues should occur in parallel and be informed by the continued application of existing climate and LMR models.     

The problem of inherited Ar* in dating impact glass by the Ar/Ar method: Evidence from the Tswaing impact crater (South Africa)

The Tswaing meteorite impact crater is a 1.13 km diameter structure located in the 2.05 Ga Nebo granite of the Bushveld Complex. The impact age had previously been determined by fission track dating to 220 ± 104 ka. ⁴⁰Ar/³⁹Ar step-heating and total fusion experiments performed on single- and multi-grain impact glass aliquots gave apparent ages ranging from 1.0 ± 0.3 Ma to 204 ± 6 Ma. These “ages” indicate that the radiogenic Ar derived from the target rocks has not been completely degassed as a result of the impact process, despite fusion of the target material. Results of step-heating experiments imply that the trapped within the glass is located in two distinct reservoirs thought to be the glass matrix and fluid/vapor inclusions (or un-melted residual clasts). Calculations assuming an age of 0.2 ± 0.1 Ma for Tswaing (fission track data) reveal that the amount of inherited ⁴⁰Ar*() relative to the pre-impact concentration varies from 0.015% to 4.15%. The spread defined by likely reflects the various quench rates experienced by the glass, most certainly due to the pre-impact position of the sample relative to the center of the crater. We compare the influence of on the apparent ⁴⁰Ar/³⁹Ar age determination of five impact structures. Our calculations show that the main characteristic controlling the age offset (for a given proportion of ) is the age difference between the impact and the target rocks (i.e., the ⁴⁰Ar* concentration in the target rock). The buffer effect for a given crater structure can be predicted knowing the age of the basement and having a rough estimation of the age of the crater structure itself. The occurrence of is likely influenced by (1) the degree of polymerization (i.e., silicate structure complexity) of the target rock and presumably related to the diffusivity of Ar in the melt and glass, (2) the Ar partial pressure at the grain boundary, (3) the quantity of energy involved in the impact, and (4) the porosity of the target rocks. For glass that inevitably suffers inherited and/or excess ⁴⁰Ar*, the use of the inverse isochron technique can be appropriate but should be applied with careful statistical treatment.     

Studies of temperature effects of dust storms

We studied the temperature variations of the lower air layer caused by dust content using a dust storm in Dushanbe in November 2007 as an example. Quantitative estimates of air cooling and a decrease in the diurnal temperature difference due to a diminishing horizontal visibility range are given. Observations of air temperature variations due to the dust content of the atmosphere in an arid zone are presented. The critical value of aerosol concentration for toggling between the greenhouse and antigreenhouse effects is determined. The long-term effect of dust aerosol on climate is analyzed.     

A study of volcanogenic exhalation mineralization

This paper considers volcanogenic exhalation mineralization using data from 35 years of observation of fumarole activity during an earlier phase of the posteruptive activity of the Second Cone, which is one of the New Tolbachik volcanoes that were formed during the eruption at the North Vent of the Great Tolbachik Fissure Eruption (Kamchatka, 1975–1976). We describe the main types of mineral associations, identify the key mineral species and the secondary and accessory minerals, as well as the sequence of mineral generation. We provide a summary of minerals and compounds that have been identified in ejecta of fumaroles on the Second Cone.     

Jinshanjiangite and bafertisite from the Gremyakha-Vyrmes Alkaline Complex,Kola Peninsula

Jinshanjiangite (acicular crystals up to 2 mm in length) and bafertisite (lamellar crystals up to 3 × 4 mm in size) have been found in alkali granite pegmatite of the Gremyakha-Vyrmes Complex, Kola Peninsula. Albite, microcline, quartz, arfvedsonite, zircon, and apatite are associated minerals. The dimensions of a monoclinic unit cell of jinshanjiangite and bafertisite are: a = 10.72(2), b=13.80(2), c = 20.94(6) Å, β = 97.0(5)° and a = 10.654(6), b = 13.724(6), c = 10.863(8) Å, β = 94.47(8)°, respectively. The typical compositions (electron microprobe data) of jinshanjiangite and bafertisite are: (Na_0.57Ca_0.44)_Σ1.01(Ba_0.57K_0.44)_Σ1.01 (Fe_3.53Mn_0.30Mg_0.04Zn_0.01)_Σ3.88(Ti_1.97Nb_0.06Zr_0.01)_Σ2.04(Si_3.97Al_0.03O₁₄)O_2.00(OH_2.25F_0.73O_0.02)_Σ3.00 and (Ba_1.98Na_0.04K_0.03)_Σ2.05(Fe_3.43Mn_0.37Mg_0.03)_Σ3.83(Ti_2.02Nb_0.03)_Σ2.05 (Si_3.92Al_0.08O₁₄)(O_1.84OH_0.16)_Σ2.00(OH_2.39F_1.61)_Σ3.00, respectively. The minerals studied are the Fe-richest members of the bafertisite structural family.