Regional scale evapotranspiration estimation using satellite derived albedo and surface temperature

In the studies reteted to surface energy balance, satellite data provides important inputs for estimating regional surface albedo and evapotranspiration. The paper describes the use of satellite data in determining the surface emissivity over heterogeneous a’reas by taking Normalized Difference Vegetation Index (NDVI) as modulating parameter at pixel resolution. The estimated emissivity values have been used to find the surface temperature at the pixel scale. Landsat-TM-visible, NIR, TIR bands data and some ground meteorological data have been used in an energy balance model for estimating surface albedo and evapotranspiration. The ET values derived from the model are in good agreement with the values obtained with. ‘CENTURY MODEL’ and ground observations over the area, suggesting the possible use of this approach fot regional scale studies on evapotranspiration.     

Applying landscape-ecological concept and GIS modelling for assessing and mapping of ecological situation of mountainous landscapes (on the case of Syunik marz,Armenia)

Regional landscape-ecological studies have acquired a special topicality as they assure efficient environmental conservation and sustainable use of natural resources. A landscape-ecological analysis was performed based on four basic integral indices: (1) ecological potential, (2) ecological stability, (3) ecological load and (4) ecological tension. The values of basic integral indices of the landscape-ecological analysis were calculated as sums of respective factors expressed in scores and multiplied by their significance reflecting coefficients. In agreement with that rule, a formula was derived of calculation of basic indices of landscape-ecological analysis. Subsequently, those factors were integrated by ‘Model Builder’ in ArcGIS applying ‘Weighted Sum’ functions. Finally, through geographic information systems modelling, maps of basic indices of landscape-ecological analysis were produced. In conclusion – ecological potential, stability, load and tension are best indicators for the assessment of the landscape-ecological situation of the studied territory.     

Canadian gravimetric geoid model 2010

A new gravimetric geoid model, Canadian Gravimetric Geoid 2010 (CGG2010), has been developed to upgrade the previous geoid model CGG2005. CGG2010 represents the separation between the reference ellipsoid of GRS80 and the Earth’s equipotential surface of $W_0=62{,}636{,}855.69~\mathrm{m}^2\mathrm{s}^{-2}$ W 0 = 62 , 636 , 855.69 m 2 s ? 2 . The Stokes–Helmert method has been re-formulated for the determination of CGG2010 by a new Stokes kernel modification. It reduces the effect of the systematic error in the Canadian terrestrial gravity data on the geoid to the level below 2 cm from about 20 cm using other existing modification techniques, and renders a smooth spectral combination of the satellite and terrestrial gravity data. The long wavelength components of CGG2010 include the GOCE contribution contained in a combined GRACE and GOCE geopotential model: GOCO01S, which ranges from $-20.1$ ? 20.1 to 16.7 cm with an RMS of 2.9 cm. Improvement has been also achieved through the refinement of geoid modelling procedure and the use of new data. (1) The downward continuation effect has been accounted accurately ranging from $-22.1$ ? 22.1 to 16.5 cm with an RMS of 0.9 cm. (2) The geoid residual from the Stokes integral is reduced to 4 cm in RMS by the use of an ultra-high degree spherical harmonic representation of global elevation model for deriving the reference Helmert field in conjunction with a derived global geopotential model. (3) The Canadian gravimetric geoid model is published for the first time with associated error estimates. In addition, CGG2010 includes the new marine gravity data, ArcGP gravity grids, and the new Canadian Digital Elevation Data (CDED) 1:50K. CGG2010 is compared to GPS-levelling data in Canada. The standard deviations are estimated to vary from 2 to 10 cm with the largest error in the mountainous areas of western Canada. We demonstrate its improvement over the previous models CGG2005 and EGM2008.     

Mapping of aggregated floodplain plant communities using image fusion of CASI and LiDAR data

Combined optical and laser altimeter data offer the potential to map and monitor plant communities based on their spectral and structural characteristics. A problem unresolved is, however, that narrowly defined plant communities, i.e. plant communities at a low hierarchical level of classification in the Braun-Blanquet system, often cannot be linked directly to remote sensing data for vegetation mapping. We studied whether and how a floristic dataset can be aggregated into a few major discrete, mappable classes without substantial loss of ecological meaning. Multi-source airborne data (CASI and LiDAR) and floristic field data were collected for a floodplain along the river Waal in the Netherlands. Mapping results based on floristic similarity alone did not achieve highest levels of accuracy. Ordination of floristic data showed that terrain elevation and soil moisture were the main underlying environmental drivers shaping the floodplain vegetation, but grouping of plant communities based on their position in the ordination space is not always obvious. Combined ordination-based grouping with floristic similarity clustering led to syntaxonomically relevant aggregated plant assemblages and yielded highest mapping accuracies.     

Exploring uncertainty in remotely sensed data with parallel coordinate plots

The existence of uncertainty in classified remotely sensed data necessitates the application of enhanced techniques for identifying and visualizing the various degrees of uncertainty. This paper, therefore, applies the multidimensional graphical data analysis technique of parallel coordinate plots (PCP) to visualize the uncertainty in Landsat Thematic Mapper (TM) data classified by the Maximum Likelihood Classifier (MLC) and Fuzzy C-Means (FCM). The Landsat TM data are from the Yellow River Delta, Shandong Province, China. Image classification with MLC and FCM provides the probability vector and fuzzy membership vector of each pixel. Based on these vectors, the Shannon's entropy (S.E.) of each pixel is calculated. PCPs are then produced for each classification output. The PCP axes denote the posterior probability vector and fuzzy membership vector and two additional axes represent S.E. and the associated degree of uncertainty. The PCPs highlight the distribution of probability values of different land cover types for each pixel, and also reflect the status of pixels with different degrees of uncertainty. Brushing functionality is then added to PCP visualization in order to highlight selected pixels of interest. This not only reduces the visualization uncertainty, but also provides invaluable information on the positional and spectral characteristics of targeted pixels.     

The design and the development of a hyperspectral and multispectral airborne mapping system

Flexible and cost-effective tools for rapid image acquisition and natural resource mapping are needed by land managers. This paper describes the hardware and software architecture of a low-cost system that can be deployed on a light aircraft for rapid data acquisition. The Hyperspectral and Multispectral Cameras for Airborne Mapping (HAMCAM) was designed and developed in the Geospatial Laboratory for Environmental Dynamics at the University of Idaho as a student-learning tool, and to enhance the existing curriculum currently offered. The system integrates a hyperspectral sensor with four multispectral cameras, an Inertial Navigation System (INS), a Wide Area Augmentation System (WAAS)-capable Global Positioning System (GPS), a data acquisition computer, and custom software for running the sensors in a variety of different modes. The outputs include very high resolution imagery obtained in four adjustable visible and near-infrared bands from the multispectral imager. The hyperspectral sensor acquires 240 spectral bands along 2.7 nm intervals within the 445–900 nm range. The INS provides aircraft pitch, roll and yaw information for rapid geo-registration of the imagery. This paper will discuss the challenges associated with the development of the system and the integration of components and software for implementation of this system for natural resource management applications. In addition, sample imagery acquired by the sensor will be presented.     

Significance of the remotely sensed thermal infrared measurements obtained over a citrus orchard

In this work we have developed a theoretical model that helps the interpretation of the remotely sensed thermal infrared measurements carried out over citrus orchards. A detailed analysis of the different factors which take part in the definition of the effective emissivity and temperature (observation height, viewing angle, type of soil, dimensions and separation between orange trees) is made. The model was validated under vertical observation in a citrus orchard during seven nights. In this situation we have determined that the model performs to an accuracy of about 1%.     

Stationary spatially modulated fourier transform spectro-radiometer

Journal of the Indian Society of Remote Sensing - A stationary, compact, spatially modulated Fourier Transform spectro-radiometer based on triangular, common path Sagnac interferometer has been...     

Land damage assessment - a case study

The paper discusses the land damage assessment and change detection analysis with reference to a mineral bearing zone in Manjhi, Manuni and Churan valleys. The area is located in environmentally sensitive and fragile region of Himalaya and constitutes of nearly 400 small-scale mines of slate, which were operative since last one hundred years and are stopped by court of law since 1995 on account of environment deterioration. The status of land degradation has been studied using IRS-1B satellite data of 1988,1992 and 1995. The geo-coded data on 1:50,000 scale has been interpreted and an increase in land degradation status was noticed. Finally, the management strategy for arresting the further land damage in a broader perspective is suggested.     

Use of the L2C signal for inversions of GPS radio occultation data in the neutral atmosphere

Results from processing FORMOSAT-3/COSMIC radio occultations (RO) with the new GPS L2C signal acquired both in phase locked loop (PLL) and open loop (OL) modes are presented. Analysis of L2P, L2C, and L1CA signals acquired in PLL mode shows that in the presence of strong ionospheric scintillation not only L2P tracking, but also L1CA tracking often fails, while L2C tracking is most stable. The use of L2C improves current RO processing in the neutral atmosphere mainly by increasing the number of processed occultations (due to significant reduction in the number of L2 tracking failures) and marginally by a reduction in noise in statistics. The latter is due to the combination of reduced L2C noise (compared to L2P) and increased L1CA noise in those occultations where L2P would have failed. This result suggests application of OL tracking for L1CA and L2C signals throughout an entire occultation to optimally acquire RO data. Two methods of concurrent processing of L1CA and L2C RO signals are considered. Based on testing of individual occultations, these methods allow: (1) reduction in uncertainty of bending angles retrieved by wave optics in the lower troposphere and (2) reduction in small-scale residual errors of the ionospheric correction in the stratosphere.