Geoeffective Disturbances in the Solar Wind near the Solar Activity Minimum according to the Data of a Two-year Series of Observations of Interplanetary Scintillations with the BSA LPI Radio Telescope

Astronomy Reports - A joint analysis of the monitoring data of interplanetary scintillations with solar and geophysical data showed that at the descending phase of the 24 solar activity cycle, the...     

An iterative method for simultaneously computing the synthesis of light and heavy elements

We propose an iterative algorithm for computing the synthesis of heavy elements through the rapid capture of neutrons (r-process) and, at sufficiently high temperatures, protons by simultaneously using two distinct computer codes. One of the codes describes the kinetics of nuclear reactions between light and intermediate chemical elements, which are the source of free neutrons and protons used by the second code to synthesize heavy elements from seed nuclides (isotopes near the iron peak of the cosmic abundance curve). The two codes interact through the neutron and proton reaction channels. We demonstrate the efficiency of our method with an example of the nucleosynthesis in a supernova’s helium shell triggered by the evaporation of neutrons and protons from α particles exposed to the neutrino flux from a collapsing stellar core. In this case, three or four iterations are enough to obtain an almost exact self-consistent solution.     

Automated mapping of rock slope geometry,kinematics and stability with RSS-GIS

A GIS-implemented, deterministic approach for the automated spatial evaluation of geometrical and kinematical properties of rock slope terrains is presented. Based on spatially distributed directional information on planar geological fabrics and DEM-derived topographic attribute data, the internal geometry of rock slopes can be characterized on a grid cell basis. For such computations, different approaches for the analysis and regionalization of available structural directional information applicable in specific tectonic settings are demonstrated and implemented in a GIS environment. Simple kinematical testing procedures based on feasibility criteria can be conducted on a pixel basis to determine which failure mechanisms are likely to occur at particular terrain locations. In combination with hydraulic and strength data on geological discontinuities, scenario-based rock slope stability evaluations can be performed. For conceptual investigations on rock slope failure processes, a GIS-based specification tool for a 2-D distinct element code (UDEC) was designed to operate with the GIS-encoded spatially distributed rock slope data. The concepts of the proposed methodology for rock slope hazard assessments are demonstrated at three different test sites in Germany.     

Regional scale evapotranspiration estimation using satellite derived albedo and surface temperature

In the studies reteted to surface energy balance, satellite data provides important inputs for estimating regional surface albedo and evapotranspiration. The paper describes the use of satellite data in determining the surface emissivity over heterogeneous a’reas by taking Normalized Difference Vegetation Index (NDVI) as modulating parameter at pixel resolution. The estimated emissivity values have been used to find the surface temperature at the pixel scale. Landsat-TM-visible, NIR, TIR bands data and some ground meteorological data have been used in an energy balance model for estimating surface albedo and evapotranspiration. The ET values derived from the model are in good agreement with the values obtained with. ‘CENTURY MODEL’ and ground observations over the area, suggesting the possible use of this approach fot regional scale studies on evapotranspiration.     

Determination of post-glacial land uplift from the three precise levellings in Finland

We have calculated vertical velocities and their change in time from three precise levellings in Finland, with central epochs 1902, 1946, and 1986. Models with and without simultaneous determination of heights give the same results for velocities. Evidence for velocity change in time appears at first sight strong but on closer examination turns out to be inconclusive. We offer an alternative explanation in terms of levelling errors and estimate them. A new uplift map closely reproduces main features of earlier maps from partial data, but does not support some details in them. Received: 27 January 1997/ Accepted: 20 April 1998     

Comparison of basin morphometry derived from topographic maps,ASTER and SRTM DEMs: an example from Kerala,India

The drainage network of a sixth-order tropical river basin, viz. Ithikkara river basin, was extracted from different sources such as Survey of India topographic maps (1: 50,000; TOPO) and digital elevation data of Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) (30 m) and Shuttle Radar Topography Mapping Mission (SRTM) (90 m). Basin morphometric attributes were estimated to evaluate the accuracy of the digital elevation model (DEM)-derived drainage networks for hydrologic applications as well as terrain characterization. The stream networks derived from ASTER and SRTM DEMs show significant agreement (with slight overestimation of lower order streams) with that of TOPO. The study suggests that SRTM (despite the coarser spatial resolution) provides better results, in drainage delineation and basin morphometry, compared to ASTER. Further, the variability of basin morphometry among the data sources might be attributed to spatial variation of elevation, raster grid size and vertical accuracy of the DEMs as well as incapability of the surface hydrologic analysis functions in the GIS platform.     

Semi-automatic delineation of badlands using contrast in vegetation activity: a case study in the lower Chambal valley,India

Population growth worldwide leads to an increasing pressure on the land. Recent studies reported that many areas covered by badlands are decreasing because parts of badlands are being levelled and converted into arable land. It is important to monitor these changes for environmental planning. This paper proposes a remote-sensing-based detection method which allows mapping of badland dynamics based on seasonal vegetation changes in the lower Chambal valley, India. Supervised classification was applied on three Landsat (Thematic Mapper) images, from 3 different seasons; January (winter), April (summer) and October (post-monsoon). Different band selection methods were applied to get the best classification. Validation was done by ground referencing and a GeoEye-1 satellite image. The image from January performed best with overall accuracy of 87% and 0.69 of kappa. This method opens the possibilities of using semi-automatic classification for the Chambal badlands which is so far mapped with manual interpretations only.     

Applying landscape-ecological concept and GIS modelling for assessing and mapping of ecological situation of mountainous landscapes (on the case of Syunik marz,Armenia)

Regional landscape-ecological studies have acquired a special topicality as they assure efficient environmental conservation and sustainable use of natural resources. A landscape-ecological analysis was performed based on four basic integral indices: (1) ecological potential, (2) ecological stability, (3) ecological load and (4) ecological tension. The values of basic integral indices of the landscape-ecological analysis were calculated as sums of respective factors expressed in scores and multiplied by their significance reflecting coefficients. In agreement with that rule, a formula was derived of calculation of basic indices of landscape-ecological analysis. Subsequently, those factors were integrated by ‘Model Builder’ in ArcGIS applying ‘Weighted Sum’ functions. Finally, through geographic information systems modelling, maps of basic indices of landscape-ecological analysis were produced. In conclusion – ecological potential, stability, load and tension are best indicators for the assessment of the landscape-ecological situation of the studied territory.     

Validation of Chlorophyll-a Algorithms in the Coastal Waters of Bay of Bengal Initial Validation Results from OCM-2

In this paper we report chlorophyll measurements made during an ocean colour validation cruise in April 2011 of the research vessel, Sagar Paschimi in the coastal waters of Northern Bay of Bengal. The chlorophyll-a concentration in these waters range from 0.2 to 4.0 mg/m³. Chlorophyll-a concentration from OCM-2 was estimated using the global ocean colour algorithms namely, OC2, OC3, OC4 and Chl-a algorithms respectively. OCM data was processed using the global SeaWiFS Data Analysis System (SeaDAS) in which all the above mentioned algorithms are embedded for estimating the chlorophyll-a concentration. A comparative study was made between and in-situ and satellite derived chlorophyll-a concentration. Although the matchups between in-situ and satellite data from OCM-2 were sparse, it indicates that direct application of the standard SeaWiFS algorithm-the OC4-V4 algorithm—in the coastal waters of the Bay of Bengal will underestimate chlorophyll-a by up to 30%. The results show a good correlation with an R value of 0.61 using OC2 algorithm. However, all the other global algorithms over estimate the chlorophyll-a concentration even in low chlorophyll concentration range. The comparison between in-situ and all the existing chlorophyll algorithms shows the efficiency of these algorithms for quantification of chlorophyll in coastal waters and hence the need to develop regional algorithms and fluorescence based algorithms for better quantification.     

Canadian gravimetric geoid model 2010

A new gravimetric geoid model, Canadian Gravimetric Geoid 2010 (CGG2010), has been developed to upgrade the previous geoid model CGG2005. CGG2010 represents the separation between the reference ellipsoid of GRS80 and the Earth’s equipotential surface of $W_0=62{,}636{,}855.69~\mathrm{m}^2\mathrm{s}^{-2}$ W 0 = 62 , 636 , 855.69 m 2 s ? 2 . The Stokes–Helmert method has been re-formulated for the determination of CGG2010 by a new Stokes kernel modification. It reduces the effect of the systematic error in the Canadian terrestrial gravity data on the geoid to the level below 2 cm from about 20 cm using other existing modification techniques, and renders a smooth spectral combination of the satellite and terrestrial gravity data. The long wavelength components of CGG2010 include the GOCE contribution contained in a combined GRACE and GOCE geopotential model: GOCO01S, which ranges from $-20.1$ ? 20.1 to 16.7 cm with an RMS of 2.9 cm. Improvement has been also achieved through the refinement of geoid modelling procedure and the use of new data. (1) The downward continuation effect has been accounted accurately ranging from $-22.1$ ? 22.1 to 16.5 cm with an RMS of 0.9 cm. (2) The geoid residual from the Stokes integral is reduced to 4 cm in RMS by the use of an ultra-high degree spherical harmonic representation of global elevation model for deriving the reference Helmert field in conjunction with a derived global geopotential model. (3) The Canadian gravimetric geoid model is published for the first time with associated error estimates. In addition, CGG2010 includes the new marine gravity data, ArcGP gravity grids, and the new Canadian Digital Elevation Data (CDED) 1:50K. CGG2010 is compared to GPS-levelling data in Canada. The standard deviations are estimated to vary from 2 to 10 cm with the largest error in the mountainous areas of western Canada. We demonstrate its improvement over the previous models CGG2005 and EGM2008.