Equation of state of MgGeO3 perovskite to 65 GPa: comparison with the post-perovskite phase

The equation of state of MgGeO₃ perovskite was determined between 25 and 66 GPa using synchrotron X-ray diffraction with the laser-heated diamond anvil cell. The data were fit to a third-order Birch–Murnaghan equation of state and yielded a zero-pressure volume (V ₀) of 182.2 ± 0.3 Å³ and bulk modulus (K ₀) of 229 ± 3 GPa, with the pressure derivative (K′₀ = (?K ₀/?P) _T ) fixed at 3.7. Differential stresses were evaluated using lattice strain theory and found to be typically less than about 1.5 GPa. Theoretical calculations were also carried out using density functional theory from 0 to 205 GPa. The equation of state parameters from theory (V ₀ = 180.2 Å³, K ₀ = 221.3 GPa, and K′₀ = 3.90) are in agreement with experiment, although theoretically calculated volumes are systematically lower than experiment. The properties of the perovskite phase were compared to MgGeO₃ post-perovskite phase near the observed phase transition pressure (～65 GPa). Across the transition, the density increased by 2.0(0.7)%. This is in excellent agreement with the theoretically determined density change of 1.9%; however both values are larger than those for the (Mg,Fe)SiO₃ phase transition. The bulk sound velocity change across the transition is small and is likely to be negative [?0.5(1.6)% from experiment and ?1.2% from theory]. These results are similar to previous findings for the (Mg,Fe)SiO₃ system. A linearized Birch–Murnaghan equation of state fit to each axis yielded zero-pressure compressibilities of 0.0022, 0.0009, and 0.0016 GPa^?1 for the a, b, and c axis, respectively. Magnesium germanate appears to be a good analog system for studying the properties of the perovskite and post-perovskite phases in silicates.     

Geochemistry and formation conditions of rare-metal granites with various fluorine-bearing minerals (fluorite,topaz, and cryolite)

A comparative geochemical study of rare-metal granitoids with various fluorine-bearing minerals (fluorite, topaz, and cryolite) was carried out. It was shown that these rocks correspond to both plumasitic and agpaitic geochemical types. The fluorite-, topaz-, and cryolite-bearing granites of these geochemical types are distinctly different in geochemical parameters and the character of magmatic evolution. These differences are related to the composition of initial magmas and their sources. Rare-metal granitoids with fluorine-bearing minerals compose small massifs, stocks, and dike swarms. Their formation is independent of the composition and age of the country rocks or geologic structures where they occur. Original Russian Text ? V.S. Antipin, E.A. Savina, M.A. Mitichkin, 2006, published in Geokhimiya, 2006, No. 10, pp. 1040–1052.     

Secular variations of the upper crust composition: Implication of geochemical data on the Upper Precambrian shales from the Southern Urals western flank and Uchur-Maya region

In the mid-1980s, it was concluded based on geochemical study that Th, Sc, La concentrations and ratios Th/Sc, La/Sc and Eu/Eu* did not wary significantly in the post-Archean time. It was impossible to judge about compositional variations of upper crust during the Riphean and Vendian, because data of that time characterized a limited number of samples from the post-Archean basins of Australia, New Zealand, and Antarctic. Considered in this work are variations of Eu/Eu*, LREE/HREE, Th/Sc, and La/Sc ratios in Upper Precambrian fine-grained siliciclastic rock of the Southern Urals western flank (Bashkirian meganticlinorium) and Uchur-Maya region (Uchur-Maya plate and Yudoma-Maya belt). As is established, only the Eu anomaly in the studied siliciclastic rocks is practically identical to this parameter of the average post-Archean shale. Three other parameters plot on the Riphean-Vendian variation curves with positive and negative excursions of diverse magnitude, which do not coincide always in time. It is assumed that these excursions likely mark stages of local geodynamic activity, destruction of pre-Riphean cratons, and progressing recycling of sedimentary material during the Riphean.     

New data on Sr-and C-isotopic chemostratigraphy of the Upper Riphean type section (Southern Urals)

New data on Sr-and C-isotopic systematics of carbonate rocks from the Upper Riphean stratotype (Karatau Group of the southern Urals) are obtained for several southwestern sections of the Bashkirian meganticlinorium, which have not been studied before. The results obtained supplement the Sr-and C-isotopic information for the group upper horizons thus detailing chemostratigraphic characterization of the entire succession. Limestone and dolostone samples used to analyze the Sr isotope composition satisfy strict geochemical criteria of the isotopic system retentivity and have been subjected to preliminary treatment in ammonium acetate to remove secondary carbonate phases. Data on 255 samples of carbonate rocks (171 studied for the first time) show that δ¹³C value varies in the Karatau Group succession from ?2.8 to +5.9 ‰ V-PDB with several in-phase excursions from the general trend in all the sections studied in the area 90 × 130 km. The δ¹³C variation trend demarcates several levels in the carbonate succession of the Karatau Group suitable for objectives of regional stratigraphy and for C-isotope chemostratigraphic subdivision of the Upper Riphean. The results of Sr isotopic analysis of 121 samples (51 unstudied before) from the Karatau Group imply that rocks in its lower part (the Katav Formation and basal horizon of the Inzer Formation) experienced considerable secondary alterations, while limestones and dolostones of the overlying interval of the group are frequently unaltered. In the “best” samples satisfying geochemical criteria of the isotopic system retentivity, the ⁸⁷Sr/⁸⁶Sr initial ratio increases from 0.70521–0.70532 in the lower Inzer deposits to 0.70611 in the upper Min’yar carbonates, decreasing to <0.70600 near the top of the latter. Above the regional hiatus separating the Min’yar and Uk formation, this ratio grows from 0.70533 to 0.70605–0.70609 in the limestone succession of the last formation.     

Diversity and stages in evolution of conodontophorids and bivalve mollusks in Triassic seas of Siberia and the Far East

Comparative analysis of taxonomic diversity dynamics of condontophorids from Boreal (Arctic regions of Russia) and Tethyan (Northwest Pacific) paleobasins showed that they had most favorable habitat environments in tropical seas. In the Boreal realm, condontophorids went through three stages of evolution comprising probably four substages and four phases, whereas three stages with six substages and twelve phases are distinguished in the Tethyan realm. The most important abiotic factors that controlled development of conodontophorids are paleotemperature of seawater and paleogeographic settings. Renewals in taxonomic composition conodontophorids and diversification of their assemblages have been confined to moments of paleotemperature and/or sea level rise. The comparative analysis of stages in evolution of conodontophorid and bivalve assemblages has been carried out. As is established, the peak taxonomic diversity of bivalves in Boreal seas was in the Late Triassic after the diversity minimum of the Early Triassic time. In contrast, conodontophorids were most diverse in the Olenekian Age.     

Ballooning instability and oscillations of coronal loops

The excitation of the ballooning instability by the eigenoscillations of coronal loops is analyzed using the energy method. The second variation of the potential energy for the case of a plasma—plasma boundary is obtained via the linearized ideal MHD equations. It is shown that the eigenmodes of a magnetic tube and of a toroidal coronal loop coincide in a first approximation. The bending oscillations of the loops are able to excite the ballooning instability when β ? 1. The effects of the instability in solar coronal loops are discussed.     

Metamorphism of sulfides and gangue quartz at the Degdekan and Gol’tsovsky gold deposits, Magadan oblast

The Degdekan and Gol’tsovsky gold-quartz deposits are located in the southeastern Yana-Kolyma gold belt. The orebodies occur as quartz veins hosted in metaterrigenous rocks and cut by postmineral basic-intermediate dikes. It was established that metamorphism of sulfides and gangue quartz was restricted to a few centimeters off the dike contact. According to sulfide geothermometers, the metamorphic temperatures close to the contact of dikes attained 700°C at the Degdekan deposit and were no higher than 491°C at the Gol’tsovsky deposit. The formation of the forbidden assemblage of quartz and loellingite and its fine-grained texture indicate that the thermal effect on the Degdekan ore was short-term. The prolonged heating of the ore at the Gol’tsovsky deposit gave rise to the aggradation recrystallization of quartz and the formation of equilibrium sulfide aggregates that show only insignificant differences in composition from the primary phases. The average homogenization temperature of primary and pseudosecondary fluid inclusions is 206 ± 40°C in the unmetamorphosed veins and 257 ± 33°C in the metamorphosed veins. The salinity of fluids in the primary and pseudosecondary inclusions in quartz veins of both types varies from 0.5 to 14.0 wt % NaCl equiv. The melting temperature of liquid CO₂ in the carbon dioxide inclusions, ranging from ?57.0 to ?60.8°C, suggests an admixture of CH₄ and/or N₂. The unmetamorphosed quartz veins were formed at a fluid pressure varying from 0.7 to 1.3 kbar, while quartz veins at the contact with dikes crystallized at a pressure of 0.8–1.5 kbar. The results of gas chromatography showed the presence of CO₂ and H₂O, as well as N₂ and CH₄. The average bulk of volatiles contained in the fluid inclusions in quartz from the metamorphosed veins is 1.5–2 times lower than in the unmetamorphosed veins; this proportion is consistent with the occurrence of decrepitated gas inclusions in the heated quartz.     

Elastic properties of granulite facies rocks of Mahabalipuram, Tamil Nadu, India

Compressional and shear wave velocities and attenuation measurements have been carried out in some of the borehole samples of acidic, basic and intermediate granulites of Mahabalipuram, Tamil Nadu, India. The results have been obtained at ambient conditions using ‘time-of-flight’ pulse transmission technique at 1.0 MHz frequency. The results show linear relationships between velocity and density, and velocity and attenuation properties of the rocks. The acidic granulites show lower velocities and higher attenuation than the intermediate and basic granulites. The average values of the Poisson’s ratio of acidic, intermediate and basic granulites have been found to be 0.210, 0.241 and 0.279 respectively. The variations in velocities and attenuation in these low porosity crystalline rocks are found to be strongly influenced by their mineral composition. The laboratory velocity data (extrapolated to high pressure) of the present study and the published field velocity data from deep seismic sounding studies indicate that these granulite facies rocks may belong to mid-crustal depths only.