Occurrence and fate of polycyclic aromatic hydrocarbons in the coastal surface microlayer

Polycyclic aromatic hydrocarbons (PAHs) were measured in the coastal sea surface microlayer (SML), the sub-surface waters (SSW) and the overlying atmosphere in order to investigate the influence of the SML on contaminant enrichment and air-sea exchange. Samples were collected at two contrasting locations of the NW Mediterranean, one urban influenced (off Barcelona, Spain) and another comparatively clean (off Banyuls-sur-Mer, France). Statistical data analysis confirmed the accumulation of PAHs in the SML with respect to the SSW (20.3+/-9.1 vs. 13.1+/-10.0 ng L(-1) in the dissolved phase; 709+/-207 vs. 158+/-111 ng g(-1) in the particulate phase). This accumulation was higher at the contaminated location (Barcelona station) compared with the more pristine one, with PAH enrichments 1.5 and 4.5 times higher for the dissolved and particulate phases, respectively, indicating that the enrichment of PAHs in the SML is dominated by particle transport processes.     

Provenance of buried esker groundwater: the case of Vars-Winchester esker aquifer,Eastern Ontario,Canada

An innovative mode of groundwater recharge to a buried esker aquifer is considered. The current conceptual model affords a natural safeguard to underlying aquifers from the overlying muds. A hypothesis of groundwater recharge to a buried esker aquifer via preferential pathways across its overlying muds is tested here by heuristic numerical one-dimensional and two-dimensional modeling simulations. The hypothesis has been tested against two other conventionally accepted scenarios involving: (1) distal esker outcrop areas and (2) remote shallow-bedrock recharge areas. The main evidence comes from documented recharge pressure pulses in the overlying mud aquitard and in the underlying esker hydraulic-head time series for the Vars-Winchester esker aquifer in Eastern Ontario, Canada. These perturbations to the potentiometric surface are believed to be the aquifer response to recharge events. The migration rate of these pressure pulses is directly related to the hydraulic diffusivity of the formation. The measured response time and response amplitude between singular radar precipitation events and well hydrographs constituted the heuristic model calibration targets. The main evidence also includes mud-layering deformation (water escape features) which was observed in seismic surveys of the over-esker muds. These disturbed stratigraphic elements provide a realistic mechanism for migrating water to transit through the muds. The effective hydraulic conductivities of these preferential pathways in the muds were estimated to be between 2?×?10^?6 and 7?×?10^?6 m/s. The implications of these findings relate to the alleged natural safeguard of these overlying muds.     

Rupture process of the 2015 Pishan earthquake from joint inversion of InSAR,teleseismic data and GPS

An earthquake of Mw6.4 occurred in Pishan County in Xinjiang Province, northwestern Tibetan Plateau, on July 3,2015. The epicenter was located on an active blind thrust system located at the northern margin of the Western Kunlun Mountain Orogenic Belt southwest of the Tarim Basin. We constructed a shovel-shaped fault model based on the layered-crust model with reference to the seismic reflection profile, and obtained the rupture process of the earthquake from the joint inversion of Interferometric Synthetic Aperture Radar(InSAR) measurements, far-field waveform data, and Global Positioning System(GPS) data. The results show that the seismic fault dips southward with a strike of 109°, and the rupture direction was essentially northward. The fault plane rupture distribution is concentrated, with a maximum recorded slip of 73 cm. The main features of the fault are as follows: low inclination angle(25°–10°), thrust slip at a depth of 9–13 km, rupture propagation time of about 12 s, no significant slip in soft or hard sedimentary layers at 0–4 km depth and propagation from the initial rupture point to the surrounding area with no obvious directionality. The InSAR time-series analysis method is used to determine the deformation rate in the source region within 2 years after the earthquake, and the maximum value is ~17 mm yr-1 in the radar line-of-sight direction. Obvious post-earthquake deformation is evident in the hanging wall, with a similar trend to the coseismic displacement field. These results suggest that the Pishan earthquake has not completely released the accumulated energy of the region, given that the multilayer fold structure above the blind fault is still in a process of slow uplift since the earthquake. Post-earthquake adjustment models and aftershock risk analysis require further study using more independent data.     

Dredging-induced nutrient release from sediments to the water column in a southeastern saltmarsh tidal creek

Dredging is a large-scale anthropogenic disturbance agent in coastal and estuarine habitats that can profoundly affect water quality. We examined the impact of a small-scale dredging operation in a salt marsh in South Carolina by comparing nutrient levels (NH(4)(+), NO(x), PO(4)(-)) and total suspended solid concentrations before and during dredging activities. Nutrient enrichment was evaluated within the context of tidal, seasonal, and inter-annual variability by using long-term water chemistry data provided by the North Inlet-Winyah Bay National Estuarine Research Reserve. The conditions of the dredging permit (i.e., its relatively small scale), the season chosen for the work (fall-winter), the nature of the sediments dredged (coarse-grained), and the amount of natural variability in the estuary's water chemistry (even on a daily time-scale) all minimized the impact of the dredging activities. Results of this study will add to the limited body of empirical data that should be considered in evaluating future dredging permit applications related to shallow estuarine waterways.     

Kinetics of hydrocarbon generation for Well Yingnan 2 gas reservoir,Tarim Basin,China

Well Yingnan 2, an important exploratory well in the east of Tarim Basin, yields high commercial oil and gas flow in Jurassic. Natural gas components and carbon isotopic composition indicate that it belongs to sapropel type gas. Because this region presents many suits of hydrocarbon source rocks, there are some controversies that natural gases were generated from kerogen gas or crude oil cracking gas at present. By using the kinetics of hydrocarbon generation and carbon isotope, natural gas of Well Yingnan 2 is composed mainly of crude oil cracking gas, about 72%, it is generated from secondary kerogen gas of Cambrian-Lower Ordovician source rock and crude oil cracking gas of Mid-Upper Ordovician oil reservoir. The main oil and gas filling time is 65 Ma later in the Jurassic gas reservoir of Well Yingnan 2, so the gas reservoir belongs to late accumulation and continuous filling type.     

Groundwater Development Stress: Global‐Scale Indices Compared to Regional Modeling

The increased availability of global datasets and technologies such as global hydrologic models and the Gravity Recovery and Climate Experiment (GRACE) satellites have resulted in a growing number of global‐scale assessments of water availability using simple indices of water stress. Developed initially for surface water, such indices are increasingly used to evaluate global groundwater resources. We compare indices of groundwater development stress for three major agricultural areas of the United States to information available from regional water budgets developed from detailed groundwater modeling. These comparisons illustrate the potential value of regional‐scale analyses to supplement global hydrological models and GRACE analyses of groundwater depletion. Regional‐scale analyses allow assessments of water stress that better account for scale effects, the dynamics of groundwater flow systems, the complexities of irrigated agricultural systems, and the laws, regulations, engineering, and socioeconomic factors that govern groundwater use. Strategic use of regional‐scale models with global‐scale analyses would greatly enhance knowledge of the global groundwater depletion problem.     

Stratigraphic relations and habitat of the Bende fish teeth,southeastern Nigeria

The age and habitat of the Bende fish fossils have remained a matter of controversy with interpretations ranging between the Paleocene Imo Formation and the Eocene Ameki Formation. Outcrop-based sequence stratigraphic analysis presented in this work shows that the Imo and Ameki Formations together include three laterally extensive estuarine central basin/offshore mud rock units that are associated with the 59.7, 58.1, and the 56.8 ma maximum flooding surfaces, respectively. Field evidence and stratigraphic analysis show that the Bende fossil bones are hosted by the mud rock unit containing the 58.1 ma maximum flooding surface, while the Ameke bone fossils are contained within the condensed section associated with the 56.8 ma maximum flooding surface. Apart from highlighting the relevance of sequence stratigraphy in paleobiological interpretations, this study shows that the Bende fish fauna which Arua first assigned to the Eocene Ameki Formation indeed belongs to the Paleocene Imo Formation.     

Origin and differentiation of picritic arc magmas,Ambae (Aoba), Vanuatu

Key aspects of magma generation and magma evolution in subduction zones are addressed in a study of Ambae (Aoba) volcano, Vanuatu. Two major lava suites (a low-Ti suite and high-Ti suite) are recognised on the basis of phenocryst mineralogy, geochemistry, and stratigraphy. Phenocryst assemblages in the more primitive low-Ti suite are dominated by magnesian olivine (mg 80 to 93.4) and clinopyroxene (mg 80 to 92), and include accessory Cr-rich spinel (cr 50 to 84). Calcic plagioclase and titanomagnetite are important additional phenocryst phases in the high-Ti suite lavas and the most evolved low-Ti suite lavas. The low-Ti suite lavas span a continuous compositional range, from picritic (up to 20 wt% MgO) to high-alumina basalts (<5 wt% MgO), and are consistent with differentiation involving observed phenocrysts. Melt compositions (aphyric lavas and groundmasses) in the low-Ti suite form a liquid-line of descent which corresponds with the petrographically-determined order of crystallisation: olivine + Cr-spinel, followed by clinopyroxene + olivine + titanomagnetite, and then plagioclase + clinopyroxene + olivine + titanomagnetite. A primary melt for the low-Ti suite has been estimated by correcting the most magnesian melt composition (an aphyric lava with 10.5 wt% MgO) for crystal fractionation, at the oxidising conditions determined from olivine-spinel pairs (fo₂ FMQ + 2.5 log units), until in equilibrium with the most magnesian olivine phenocrysts. The resultant composition has 15 wt% MgO and an mg ^Fe2 value of 81. It requires deep (3 GPa) melting of the peridotitic mantle wedge at a potential temperature consistent with current estimates for the convecting upper mantle (T _p 1300°C). At least three geochemically-distinct source components are necessary to account for geochemical differences between, and geochemical heterogeneity within, the major lava suites. Two components, one LILE-rich and the other LILE- and LREE-rich, may both derive from the subducting ocean crust, possibly as an aqueous fluid and a silicate melt respeetively. A third component is attributed to either differnt degrees of melting, or extents of incompatible-element depletion, of the peridotitic mantle wedge.     

Three-dimensional thermal structure of the Chinese continental crust and upper mantle

We invert S-wave velocities for the 3D upper-mantle temperatures, in which the position with a temperature crossing the 1300℃ adiabat is corresponding to the top of the seismic low velocity zone. The temperatures down to the depth of 80 km are then calculated by solving steady-state thermal conduction equation with the constraints of the inverted upper-mantle temperatures and the surface temperatures, and then surface heat flows are calculated from the crustal temperatures. The misfit between the calculated and observed surface heat flow is smaller than 20% for most regions. The result shows that, at a depth of 25 km, the crustal temperature of eastern China (500―600℃) is higher than that of western China (<500℃). At a depth of 100 km, temperatures beneath eastern and southeastern China are higher than the adiabatic temperature of 1300℃, while that beneath west China is lower. The Tarim craton and the Sichuan basin show generally low temperature. At a depth of 150 km, temperatures beneath south China, eastern Yangtze craton, North China craton and around the Qiangtang terrane are higher than the adiabatic temperature of 1300℃, but is the lowest beneath the Sichuan basin and the regions near the Indian-Eurasian collision zone. At a depth of 200 km, very low temperature occurs beneath the Qinghai-Tibet Plateau and the south to the Tarim craton.