A warped m= 2 water maser disc in V778 Cyg?

The silicate carbon star V778 Cyg is a source of 22-GHz water maser emission which was recently resolved by MERLIN. Observations revealed an elongated     -like structure along which the velocities of the maser features show a linear dependence on the impact parameter. This is consistent with a doubly warped   m = 2  disc observed edge-on. Water masers and silicate dust emission (detected by the Infrared Astronomical Satellite and Infrared Space Observatory ) have a common origin in O-rich material and are likely to be co-located in the disc. We propose a detailed self-consistent model of a masing gas–dust disc around a companion to the carbon star in a binary system, which allows us to estimate the companion mass of  1.7 ± 0.1 M_⊙  , the disc radius of  40 ± 3  au and the distance between companions of ∼80 au. Using a dust–gas coupling model for water masing, we calculate the maser power self-consistently, accounting for both the gas and the dust energy balances. Comparing the simulation results with the observational data, we deduce the main physical parameters of the masing disc, such as the gas and dust temperatures and their densities. We also present an analysis of the stability of the disc.     

The Preboreal climate reversal and a subsequent solar‐forced climate shift

Accurate chronologies are essential for linking palaeoclimate archives. Carbon‐14 wiggle‐match dating was used to produce an accurate chronology for part of an early Holocene peat sequence from the Borchert (The Netherlands). Following the Younger Dryas–Preboreal transition, two climatic shifts could be inferred. Around 11 400 cal. yr BP the expansion of birch (Betula) forest was interrupted by a dry continental phase with dominantly open grassland vegetation, coeval with the PBO (Preboreal Oscillation), as observed in the GRIP ice core. At 11 250 cal. yr BP a sudden shift to a humid climate occurred. This second change appears to be contemporaneous with: (i) a sharp increase of atmospheric ¹⁴C; (ii) a temporary decline of atmospheric CO₂; and (iii) an increase in the GRIP ¹⁰Be flux. The close correspondence with excursions of cosmogenic nuclides points to a decline in solar activity, which may have forced the changes in climate and vegetation at around 11 250 cal. yr BP. Copyright © 2004 John Wiley & Sons, Ltd.     

Geochronological evidence for late‐Grenvillian magmatic and metamorphic events in central Taimyr,northern Siberia*

U–Th–Pb analyses of zircons from six granites and one metasediment collected in the accretionary Central belt of Taimyr, Arctic Siberia, demonstrate that Neoproterozoic (c. 900 Ma) granites intrude late Mesoproterozoic/early Neoproterozoic amphibolite facies metamorphic rocks. This is the first time in the Mamont–Shrenk region that Neoproterozoic ages have been recognized for these lithologies, previously thought to be Archaean/Palaeoproterozoic in age. The Mamont–Shrenk Terrane (MST) represents a Grenvillian age (micro?) continent intercalated with younger Neoproterozoic ophiolites during thrusting and accreted to the northern margin of the Siberian craton sometime before the late Vendian. Basement to the MST may have been derived from the Grenvillian belt of east Greenland. Viable tectonic reconstructions must allow for an active margin along northern Siberia (modern day coordinates) in the middle Neoproterozoic.     

Paleostress-tensor analysis of late deformation events in the Odenwald Crystalline Complex and comparison with other units of the Mid-German Crystalline Rise, Germany

Summary Geometric data of fault planes and fault plane lineations, together with the observed sense of shear on the slip planes, were used to calculate paleostress tensors and fields responsible for the post metamorphic peak D3 and D4 deformation events in the four Odenwald units sensu Krohe (1991). The paleostress fields were calculated using the method of Will and Powell (1991). As inferred from the paleostress analysis, the D3 strike-slip deformation west of the Otzberg fault zone was caused by a, ± N-S directed, compressional regional stress field, with shallowly plunging σ₁ axes and σ₃ directions that plunge at shallow to moderate angles to the E or W; the calculated mean orientations are: σ₁ 06 → 350, σ₂ 77 → 234 and σ₃ 12 → 085. The B?llsteiner Odenwald east of the Otzberg fault zone was not affected by this stress field. This implies that the Bergstr?sser and B?llsteiner Odenwald were spatially separated and formed independent crustal blocks during D3. The D4 faulting event is recognised in all areas investigated, even though most prominently in units III and IV, and juxtaposed the Bergstr?sser and B?llsteiner Odenwald. This faulting episode was caused by a paleostress field with a steeply westerly plunging σ₁ axis and a shallowly southsoutheasterly plunging σ₃ axis. The orientations of the principal stresses are: σ₁ 52 → 270, σ₂ 38 → 085 and σ₃ 06 → 174. With continued deformation from D3 to D4, there was a progressive change in the orientation of the stress field indicating a change from a N-S compressional to extensional stress field, accompanied by the progressive development of strike-slip faults and late normal faults. Paleostress field orientations in the Pfalz Forest, SW of the Odenwald, determined by Fl?ttmann and Oncken (1992) are very similar to those obtained for the Odenwald region and indicate a regionally consistent stress pattern in the southwestern part of the Mid-German Crystalline Rise (MGCR) during strike-slip and normal faulting deformations.

---

Zusammenfassung Paleostress-Tensor Analyse sp?ter Deformationsereignisse im Odenwald-Kristallin und ein Vergleich mit anderen Einheiten der Mitteldeutschen Kristallinzone, Deutschland Für die vier Odenwald-Einheiten im Sinne von Krohe (1991) wurden Pal?ostressfelder für die Blattverschiebungs- und Abschiebungsereignisse D3 und D4 mit der Methode von Will und Powell (1991) berechnet. Die Analyse ergibt, da? das regionale Spannungsfeld, das westlich der Otzberg-Zone im Bergstr?sser Odenwald zum D3-Ereignis führte, ein ± N-S gerichtetes kompressives Stresssfeld war. Die σ₁-Achse f?llt flach nach N bzw. S ein, die σ₃-Achse mit kleinen bis moderaten Winkeln nach E bzw. W; die berechneten Orientierungen der Hauptspannungsrichtungen sind: σ₁ 08 → 350, σ₂ 77 → 234 and σ₃ 12 → 085. Der B?llsteiner Odenwald, ?stlich der Otzberg-Zone, wurde von diesem Spannungsfeld nicht erfa?t. Dies impliziert, da? Bergstr?sser und B?llsteiner Odenwald w?hrend des D3-Ereignisses voneinander getrennt waren und separate Krusteneinheiten darstellten. Auswirkungen der D4-Deformation k?nnen im gesamten Untersuchungsgebiet erkannt werden, am st?rksten jedoch in den Einheiten III und IV. Dieses Ereignis wurde von einem Pal?ostressfeld mit einer steil nach W einfallenden σ₁- und einer flach nach SSE einfallenden σ₃-Achse verursacht und führte zum Zusammenschlu? von Bergstr?sser und B?llsteiner Odenwald. Die berechneten Orientierungen der Hauptspannungsrichtungen sind: σ₁ 52 → 270, σ₂ 38 → 085 und σ₃ 06 → 174. Die Rotation der Hauptspannungsrichtungen war mit einer ?nderung von einem kompressionalen N-S gerichteten (D3) hin zu einem extensionalen (D4) Stressfeld verbunden. Die erzielten Ergebnisse sind sehr ?hnlich mit Resultaten, die Fl?ttmann und Oncken (1992) im Pf?lzer Wald ermittelten. Dies weist auf ein regional übereinstimmendes Spannungsfeld im SW-Teil der Mitteldeutschen Kristallinzone hin.

---

---

Received July 8, 1999; revised version accepted March 28, 2000     

Kinematic wave modelling in water resources: a historical perspective

The history of the kinematic wave theory and its applications in water resources are traced. It is shown that the theory has found its niche in water resources and its applications are so widespread that they may well constitute what may be termed ‘kinematic wave hydrology’. Few theories have been applied in hydrology and water resources as extensively as the kinematic wave theory. This theory, however, is not without limitations and when it is applied they must be so recognized. Copyright © 2001 John Wiley & Sons, Ltd.     

Is IRAS 03134 + 5958 a Herbig-Haro object?

The source IRAS 03134 + 5958 identified by Iyengar & Verma (1984) on the Palomar Observatory Sky Survey (POSS) prints with a nonstellar optical object with [P – R]≃ 5.3 ± 1.5 is near the edge of Lynds dark cloud No. 1384 and is either embedded in or behind the cloud. The galactic latitude of this source (b ^II = 2‡.3), its positionvis-a-vis the Lynds dark cloud, its nonstellar appearance, high [P – R] colour and its far-infrared spectrum, all suggest the possibility of its being a Herbig-Haro (HH) object. To test this possibility we undertook measurements of its proper motion and variability (two of the characteristic properties of HH objects). These yield μ_a = (3.6 ± 2.3) arcsec/century and μ_δ= (−1.2 ± 2.0) arcsec/century for its proper motion. The source reveals large variation in brightness between 1950 and 1954. Optical line studies of the source are required to confirm its classification as an HH object.     

A model for the constant-head pumping test conducted in vertically fractured media

An analytical model for the constant-head pumping test is developed for a partially penetrating well that has a finite thickness skin, and intersects a single vertical fracture. In the model, the fracture is fully confined and flow occurs only in the fracture. The model is developed using Laplace transform and finite Fourier transform methods. The model is to be used for analysing well test data from vertically fractured media and for verifying numerical models. Dimensionless curves are used to study the effects of a finite thickness skin and a partially penetrating wellbore. In the presence of a finite thickness skin, or a partially penetrating wellbore, a typical flow response for the constant-head pumping test has three distinct periods of flow corresponding to small-, intermediate- and large-time. Small- and large-time approximations are presented for the model. For tests where the wellbore is fully penetrating, or the partial penetration ratio is known, these approximations can be used to analyse field data.     

BATSE/OSSE rapid burst response

The BATSE and OSSE instrument teams have modified flight software to promptly (within 2 min of trigger) slew the OSSE detectors to burst locations determined on-board by BATSE. This enables OSSE to make sensitive searches for prompt and delayed post-burst line and continuum emission above 50 keV. In the best cases our sensitivity will be more than an order of magnitude better than any other search in this energy range. We expect to slew to 1–2 bursts per month, based on the OSSE FOV and BATSE event rate. Detections or limits from continued operation of this system may provide significant constraints on burst models. As an example of the observations made using this system, we present preliminary limits for post-burst emission from GRB 950223 on several time scales.