The latitude of filament bands at the sunspot minimum and the activity level in the two following 11-year solar cycles

The zonal structure of the distribution of filaments is considered. The mean latitudes of two filament bands are calculated in each solar hemisphere at the minima of the sunspot cycle in the period 1924–1986: middle latitude _{2, m} and low latitude _{1, m} . It is shown that the mean latitude of the filament band _{2, m} at the minimum -m of the cycle correlates, with = 0.94, with the maximum - M sunspot area S(M) and maximum Wolf number W(M) in the succeeding solar cycle M. It is shown that the mean latitude of the low-latitude filament band _{1, m} is linearly dependent on the mean latitude filament band _{2, m + 1} at the succeeding minimum. We found a correlation of the latitude of the low-latitude filament band _{1, m} with the maximum sunspot area in the M + 1 cycle. This enables us to predict the power of two succeeding 11-year solar cycles on the basis of the latitude of filament bands at the minimum of activity, 1985–1986: W(22) - 205 ± 10, W(23) - 210 ± 10. The importance of the relationships found for theory and applied aspects is emphasized. An attempt is made to interpret the relationships physically.     

Exact Bianchi-type VIII and IX models in the presence of the self-creation theory of cosmology

Exact Bianchi-type VIII and IX models in the presence of Barber's second self-creation theory of cosmology are presented, when the source of the gravitational field is a perfect fluid withP=. Some physical and geometrical properties of the models are discussed.     

Light scattering by nonspherical ice grains: An application to noctilucent cloud particles

The light scattered by noctilucent cloud particles is nearly fully polarized at scattering angles in the vicinity of 90 . This was one of the reasons to conclude that the upper limit of their sizes is not larger than about 0.12 m. Nevertheless, this estimate was made on the basis of the Mie scattering theory for spherical particles, whereas many investigators noted usefulness of highly aspherical shapes of noctilucent cloud particles. In this paper, we used rigorous light scattering theory for randomly oriented nonspherical particles to calculate the degree of linear polarization of the scattered light for ice grains of different shape. By comparing these calculations with rocket polarization measurements of noctilucent clouds, we show that, as for spherical particles, the upper limit of particle equal-volume radii for slightly flattened and elongated grains is of about 0.12 m, while for highly aspherical plate-like and needle-like particles this upper limit is substantially larger and is of about 0.18–0.20 m. We also report calculations of the volumetric scattering cross-section for particles of different shape and show that randomly oriented spheroids have (slightly) smaller scattering cross section per unit particle mass than equal-volume spherical grains. Nevertheless, if in noctilucent clouds plate-like and needle-like grains grow to much larger sizes than spherical particles, their scattering efficiency may be much greater.     

Some observations on migration within and from the former USSR in the 1990s

"Patterns of population distribution revealed from 1989 census data are used to assess how future population movements could be affected by current political, social, and economic changes. Much migration in the USSR has reflected central planning decisions as much as the spontaneous decisions of individuals. To the extent that the influence of the command economy diminishes and a market economy emerges, major new directions of migration flows can be expected. The return of ethnic 'expatriates' to home republics can be expected to increase, as can economic migration to areas with favorably perceived economic prospects, and migration to Central and Western Europe."     

Application of remote sensing technology for Impact Assessment of Watershed Development Programme

The current study was taken up to investigate the utility of remote sensing and GIS tools for evaluation of Integrated Wasteland Development Programme (IWDP) implemented during 1997–2001 in Katangidda Nala watershed, Chincholi taluk, Gulbarga district, Karnataka. The study was carried out using IRS 1C, LISS III data of December 11, 1997 (pre-treatment) and November 15, 2002 (post-treatment) covering the watershed to assess the changes in land use / land cover and biomass that have changed over a period of five years (1997–2002). The images were classified into different land use/land cover categories using supervised classification by maximum likelihood algorithm. They were also classified into different biomass levels using Normalized Difference Vegetation Index (NDVI) approach. The results indicated that the area under agriculture crops and forest land were increased by 671 ha (5.7%) and 1,414 ha (11.94%) respectively. This is due to the fact that parts of wastelands and fallow lands were brought into cultivation. This increase in the area may be attributed to better utilization of surface and ground waters, adoption of soil and water conservation practices and changes in cropping pattern. The area under waste lands and fallow lands decreased by 1,667 ha (14.07%) and 467 ha (3.94%), respectively. The vegetation vigour of the area was classified into three classes using NDVI. Substantial increase in the area under high and low biomass levels was observed (502 ha and 19 ha respectively). The benefit-cost analysis indicates that the use of remote sensing and GIS was 2.2 times cheaper than the conventional methods. Thus, the repetitive coverage of the satellite data provides an excellent opportunity to monitor the land resources and evaluate the land cover changes through comparison of images for the watershed at different periods.     

3D Reconstrution with Rational Function Model

Rational Function Model (RFM) is the alternate sensor Model to the rigorous sensor model that allows end user to perform sensor-independent photogrammetric processing. Nowadays, commercial off-the-shelf (COTS) digital photogrammetric work stations have incorporated RFM as a method for image restitution. It is technically applicable to all types of airborne and space borne sensors. In this paper, we describe the derivations of the algorithmic procedure for third order inverse and forward RFM method for 3-D reconstruction. Model accuracy is evaluated for aerial image, TK-350 Russian image and IRS-1C PAN image. The results ensure that properly constructed RFM are accurate enough to be used in place of the original rigorous models. The test results are reported and summarised.     

Use of laser range and height texture cues for building identification

Airborne LiDAR has found application in an increasing number of mapping and Geo-data acquisition tasks. Apart from terrain information generation, applications such as automatic detection and modeling of objects like buildings or vegetation for the generation of 3-D city models have been explored. Besides the height itself, height texture defined by local variations of the height is a significant parameter for object recognition. The paper explores the potential of the analysis of height texture as a cue for the automatic detection of objects in LiDAR datasets. A number of texture measures were computed. Based on their definition and computation these measures were used as bands in a classification algorithm, and objects like buildings, single trees, and roads could be recognized.     

Distribution analysis of salt affected soils under canal and non-canal command area in a part of Etah district,U. P., using remote sensing technique

A World Bank-aided project on sodic land reclamation in Uttar Pradesh is being executed by U.P. Bhumi Sudhar Nigam, Lucknow, and Remote Sensing Applications Centre, U.P., Lucknow has the responsibility of sodic land mapping for the execution of land reclamation programme at the cadastral level. Sodic lands are mainly concentrated in the Gangetic alluvial plains but the problem of sodicity is particularly acute in the canal-irrigated areas. A study of the distribution pattern of sodic lands in canal and noncanal command areas in a reclamation site (covering 60 villages out of which sodic lands were mapped in 51 villages) of Etah district in Uttar Pradesh, indicates that 18.39 per cent area of the canal command villages was barren sodic which was 13.41 per cent of the total geographical area of the site (15417 ha), however, 11.69 per cent area was recorded to be barren sodic in the non-canal command villages which was only 3.16 per cent of the geographical area of the site. The results of soil chemical analysis indicate that barren sodic lands of canal command area are saline-sodic with higher concentration of soluble salts (pH₂ >8.5, EC₂ >4 dSm⁻¹), however, those of non-canal command area are sodic (pH₂ >8.5, EC₂ <4 dSm⁻¹). The post-monsoon ground level in the canal-irrigated areas was in the critical and semicritical zone (< 3.0 mbgl) whereas it was well below the semi-critical zone in the non-canal command area, which indicates that the high ground water level is a major factor to higher the area under sodicity.     

Urban cadastral mapping using very high resolution remote sensing data

With growing urban expanses, one of the pre-requisites for effective governance is Urban Information Systems (UIS) with content down to individual properties (and individuals). The basic input i.e., a map, in UIS should show individual property boundaries showing the plan outline of all structures existing within, at a scale of 1:1000 and larger with sub-metre to centimeters planimetric and geometric accuracy. With very high resolution remote sensing data of the order of 1m available in hand, it is possible to prepare maps with high resolution spatial content. The present exercise demonstrates a method of preparing a geometrically and planimetrically accurate urban cadastral map on very large scale for a small area of about 5 sq km. IKONOS merged data with 1m resolution is used for the purpose. Mapping was done in conjunction with on-site measurements and sketches. Guides are used to maintain shape symmetry and accuracy of buildings and other features. Working out cost of mapping per unit area is another objective in the present exercise. For want of fully or semi-automatic methods of information extraction from very high resolution remote sensing data, it is imperative that mapping should be carried out in conjunction with some on-site measurements wherever necessary.