Sedimentation on the Ionian active margin (Hellenic arc) — Provenance of sediments and mechanisms of deposition

Lithological, sedimentological, mineralogical and faunal analyses of twenty cores from the western Peloponnesus margin and adjacent Matapan Trench permit the origin of the sediments and the processes of sedimentation to be defined in some detail.Except for the ash layers derived from the Ischian Province, the major part of the sediment is local in origin (Peloponnesus). Analyses of heavy, light and clay minerals enable three main provinces to be distinguished. Each of these provinces includes one or more slope basins and a portion of trench, without lateral connection between them and mixing of inputs.The diversity and complexity of sedimentary structures, the granulometric characters, the mixed fauna (molluscs and ostracods) and the variability of rates of sedimentation all testify to the prevalence of reworking phenomena and gravitative processes.These data confirm and elaborate on the model of sedimentation deduced from seismic studies in which sediments are successively trapped, released by the slope basins and transferred via channels and canyons towards the underlying trench basins. This “cascade feeding” appears characteristics of this subductive sedimentary environment.     

Eddies and planetary waves in the Central Arabian Sea

Eddies and planetary waves are identified as one of the important factors that control the dynamics of the Arabian Sea. During 10–14 January 1990, Ignat, Paulyuchenkov (USSR ship) conducted an experiment in the central Arabian Sea and of late TOPEX/POSEIDON satellites collected data on sea surface height (SSH) anomalies of the Arabian Sea. These data sets give an opportunity to understand the characteristic of eddies and planetary waves in this region during winter. The geostrophic flow revealed three anticyclonic and two cyclonic eddies of diameters ranging from 75 to more than 150 km from surface to subsurface levels. Current speeds around different eddies were maximum at surface and varied from 9 cm/s to 25 cm/s (at the middle point between the center and periphery). The occurrence of eddies were further investigated with the TOPEX/POSEIDON altimetry for the years 1993–97. The analysis revealed multiple eddies of diameter 100 to 550 km occur every year with maximum number of eddies during 1997 and minimum during 1995. The calculated speed varied between 8–30 cm/s around various eddies. Longitude-Time plots showed annual Rossby waves generating at the eastern Arabian Sea and propagating westwards with a phase speed of ~ 10 cm/s along 16° N. Further, it was observed that these waves arrived in the study area by January. In addition, another positive anomaly of SSH was found generating at the western Arabian Sea simultaneously and extended up to the study region by April–June. Time series of SSH at selected locations along 16°N revealed many small-scale oscillations and their spatial variability. These oscillations were delineated using the FFT analysis. Other than the Rossby wave, the major components at the study region were 40–60 and 26–32 day oscillations. The implications of these long period waves associated with eddies are discussed.     

Simulating the effect of Nitrogen application on Wheat Yield by linking remotely sensed measurements with wtgrows simulation model

A field experiment was conducted on wheat at New Delhi with five treatments of Nitrogen (N) fertilizer application (0, 30, 60, 90 and 120 kgha^-1). Relationship has been established between observed leaf area index (LAI) and remotely sensed vegetation indices. These relationships are inverted and used for predicting LAI from vegetation indices on different days after sowing. The “re-initialization” strategy is implemented in model WTGROWS in which initial conditions of model are changed so that the model simulated LAI match remote sensing predicted LAI. The model performance with re-initialization has been evaluated by comparing the simulated grain yield and total above-ground dry matter (TDM) values with the actual observations. The results show that in-season re-initialization is effective in model course correction by improving the simulated results of yield and TDM for different N treatments even though the model was run with no N stress condition. Model re-initialization at different days shows that the closer is the day of re-initialization to crop anthesis the more effective is model course correction. Also, the treatment showing maximum error in yield simulation without re-initialization shows maximum reduction in error by re-initialization. The approach shows that the remote sensing inputs can substitute for some of the inputs or errors in inputs required by crop models for yield prediction.     

Check dam positioning by prioritization of micro-watersheds using SYI model and morphometric analysis — Remote sensing and GIS perspective

Sediment Yield Index (SYI) model and results of morphometric analysis have been used to prioritize watersheds and to locate sites for checkdam positioning in Tarafeni watershed in Midnapur district. West Bengal. Various thematic maps such as land use/land cover, slope, drainage, soil etc. were prepared from 1RS ID LISS III digital data, SOI toposheets of 1:50,000 scale and other reference maps. Morphometric parameters such as bifurcation ratio (R_b). drainage density (D_d), texture ratio (T), length of overland flow (L_o), stream frequency (F_u), compactness coefficient (C_c), circularity ratio (R_c), elongation ratio (E_r), shape factor (B_s) and form factor (R_f) were computed. Automated demarcation of prioritization of micro-watersheds was done by using GIS overlaying technique by assigning weight factors to all the identified features in each thematic map and ranks were assigned to the morphometric parameters. Five categories of priority viz., very high, high, medium, low and very low, were given to all the watersheds in both the methods. Sixty-two micro-watersheds using SYI method and twenty-three micro-watersheds using morphometric have been prioritized as very high priority. Final priority map was prepared by considering the commonly occurred very high-prioritized micro-watersheds in both SYI model and morphometric analysis. Twenty-four suitable sites were identified for check dam construction in 21 highly prioritized watersheds. It is proved that integrated study of SYI model and morphometric analysis yield good result in prioritization of watersheds.     

Geometry and accuracy of reflecting points in bistatic satellite altimetry

The analysis of the time and space distribution of specular (reflecting) points in bistatic altimetry between GPS and CHAMP satellites or SAC-C (taken as examples) is extended from Wagner and Klokočník (2003 J. Geod 77: 128–138). We demonstrate a significantly higher number and density of reflecting points in bistatic altimetry in comparison with traditional monostatic altimetry. After an outline of our older accuracy assessment for the vertical position of the reflecting point, we add a new independent derivation and compare both approaches. We account for orbit errors of both the transmitters (GPS) and receiver (CHAMP) satellites, and the measurement (delay) error. We found that the accuracy of the vertical position of the reflecting point decreases only slowly with increasing off-nadir angle and that the orbit errors must be accounted for if decimeter and better accuracy is required. In this paper, we do not study errors such as state of the ocean, technical parameters of the receiving system, and atmospheric corrections.     

Low-low satellite-to-satellite tracking: a comparison between analytical linear orbit perturbation theory and numerical integration

Low-low satellite-to-satellite tracking (ll-SST) range-rate observations have been predicted by two methods: one based on a linear perturbation theory in combination with the Hill equations, and one based on solving the equations of motion of two low-flying satellites by numerical integration. The two methods produce almost equivalent Fourier spectra of the range-rate observations after properly taking into account a few resonant terms. For a typical GRACE-type configuration, where the two satellites trail each other at a distance of 300 km at an altitude of 460 km, and in the presence of the EGM96 gravity field model, complete to spherical harmonic degree and order 70, the agreement between the Fourier spectra is about 1 mm/s compared to a root-mean-square (RMS) value of more than 220 mm/s for the range-rate signal. The discrepancy of 1 mm/s can be reduced significantly when not taking into account perturbations caused by the J₂ term. Excluding the J₂ term, the agreement between the two methods improves to 0.4 mm/s compared to a RMS value of 6 mm/s for the range-rate signal. These values are 0.01 and 2.3 mm/s when ignoring the spectrum for frequencies below two cycles per orbital revolution, reducing the discrepancy even further to about 0.5% of the signal. The selected linear perturbation theory is thus capable of modeling gravity field induced range-rate observations with very high precision for a large part of the spectrum.     

Global height datum unification: a new approach in gravity potential space

The problem of “global height datum unification” is solved in the gravity potential space based on: (1) high-resolution local gravity field modeling, (2) geocentric coordinates of the reference benchmark, and (3) a known value of the geoid’s potential. The high-resolution local gravity field model is derived based on a solution of the fixed-free two-boundary-value problem of the Earth’s gravity field using (a) potential difference values (from precise leveling), (b) modulus of the gravity vector (from gravimetry), (c) astronomical longitude and latitude (from geodetic astronomy and/or combination of (GNSS) Global Navigation Satellite System observations with total station measurements), (d) and satellite altimetry. Knowing the height of the reference benchmark in the national height system and its geocentric GNSS coordinates, and using the derived high-resolution local gravity field model, the gravity potential value of the zero point of the height system is computed. The difference between the derived gravity potential value of the zero point of the height system and the geoid’s potential value is computed. This potential difference gives the offset of the zero point of the height system from geoid in the “potential space”, which is transferred into “geometry space” using the transformation formula derived in this paper. The method was applied to the computation of the offset of the zero point of the Iranian height datum from the geoid’s potential value W ₀=62636855.8 m²/s². According to the geometry space computations, the height datum of Iran is 0.09 m below the geoid.     

Boreal forest transmissivity in the microwave domain using ground-based measurements

This letter proposes an estimation of microwave transmissivity within the Canadian boreal forest. The aim is to correct the forest effect in snow water equivalent estimation from Special Sensor Microwave Imager and Advanced Microwave Scanning Radiometer microwave measurements. The estimation was carried out using ground-based radiometric measurements, at 19 and 37 GHz, and for both polarizations. The results show that the transmissivity is correlated with the stem volume and is independent of the tree species. For high stem volumes (>100 m/sup 3//ha), the transmissivity is found to be 0.4 and 0.3 for 19 and 37 GHz, respectively.     

Cloud bottom altitude determination from a satellite

The letter is devoted to the introduction of a new technique to derive the cloud bottom height (CBH) from satellite measurements of the cloud reflectance in the oxygen A-band. The information on the cloud top height needed in the retrieval of the CBH must be obtained from separate measurements to insure small biases in the retrieved CBH. Such measurements can be performed by a space-based lidar.