Comparison of Fiberglass and Other Polymeric Well Casings, Part I: Susceptibility to Degradation by Chemicals

Previous research has shown that the most commonly used well casing materials-stainless steel. polyvinyl chloride (PVC). and polytetra-fluoroethylene (PTFE)-are not suited for all monitoring environments and applications. This study is part of a series of experiments that were conducted to determine the suitability of four other polymeric well casing materials-acrylonitrile butadiene styrene (ABS), fluorinalcd ethylene propylene (FHP), fiberglass-reinlorced epoxy (FRE), and fiberglass-reinforced plastic (FRP)- for use in ground water monitoring wells. In these studies, these four materials were compared with two other commonly used polymeric well casings, PVC and PTFE. Part I of these studies examines the resistance of these materials to degradation by chemicals. Future reports will consider sorption and leaching of organic and metal contaminants.
In this study, the six materials were exposed to 28 neat organic compounds (including one acid) and to extremely acidic and alkaline aqueous solutions for up to 112 days. This was done to simulate the most aggressive environments to which monitoring well casings may be exposed. The casings were observed for changes in weight and signs of physical degradation (swelling, softening, deterioration, or dissolution).
The two fluorinated polymers (FEP and PTFE) were not degraded by any of the lest chemicals. Among the nonfluorinated products tested. FRE was the most inert. Three organic chemicals caused the glass fibers to separate. and two organic solvents caused weight gains exceeding 10 percent. ABS was the most readily degraded material tested. By the end of the study, only the acid and alkaline solutions had little effect on ABS. FRP was more severely degraded by the organic chemicals than FRH but was less affected than PVC. FRP and FRE. lost weight when exposed to the highly acidic conditions.     

Temporal behaviour of artificial small-scale ionospheric irregularities: Review of experimental results

Features of artificial small-scale ionospheric irregularities (ASI) induced at F-region heights by powerful HF waves are discussed. The investigations presented here were performed during the past two decades at the Zimenki and Sura heating facilities, located at middle latitudes near Nizhniy Novgorod, Russia, as well as at the Gissar facility located at a lower latitude near Dushanbe, Tadzhikistan. The measurements were made by a variety of diagnostic methods employing artificial field-aligned scattering of HF and VHF radio waves, sounding of the disturbed region by means of low-power probing waves and testing of the artificial turbulence by means of stimulated electromagnetic emission (SEE). The dependence of ASI on such parameters as transverse scale length of the artificial irregularities, their location in the disturbed region, the power of the heating wave, the duration of HF radiation, geophysical conditions, aftereffects of the preceding modification, and the schedule of heater operation is considered for both the development stage after pump turn-on and the decay stage after pump turn-off. The temporal evolution of ASI spectral characteristics during the heater period is discussed. An empirical model for the ASI, based on the data available, was elaborated and verified by computer simulation of SEE generation.     

Numerical simulation of the mutual conversion of ordinary and extraordinary waves in a magnetised plasma by artificial ionospheric turbulence

Some effects of normal mode coupling in weakly anisotropic inhomogeneous plasma are analysed on the basis of the numerical solution of transfer equations for the Stokes parameters. The numerical analysis of normal mode conversion on a set of isolated irregularities demonstrates the possibility of an effective polarisation transformation on such structures. It is shown that by the appropriate selection of discrete irregularities of the external magnetic field direction or plasma electron concentration resulting in radio-wave refraction, one can control electromagnetic radiation polarisation characteristics. Analytical expressions for mean Stokes parameters have been obtained for the rare isolated irregularities. The opportunity for the simulation of mutual wave conversion processes in the ionospheric heating experiments is discussed.     

Remote sensing detection of atmospheric pollutants by differential absorption LIDAR 510M/SODAR PA2 mobile system

Summary Air pollution problem in the Czech Republic is very complex due to large number of factors as turbulent dispersion and chemical reactions concurring in the status of the PBL. For this 3D distribution of pollutants is a key information that cannot be given by conventional monitoring stations. Combined use of DIAL lidar and sodar can give access to such information. Case studies of air pollutants transport are presented using 3D concentration fields of NO₂ and ozone measured by lidar and meteorological conditions monitored by Doppler Sodar.     

俄罗斯远东金属矿床形成条件的古地球动力学分析

根据本区地质构造的新资料,提出了区域板块构造模型。研究了从俯冲到加利福尼亚型转换和由后者又到俯冲的古地球动力学环境更替的意义。这种更替发生在对本区最重要的中—新生代历史时期,对区域成矿带整体乃至一些金属矿床的形成具有重要影响。论证了一些地体性质,尤其是俯冲-增生杂岩对矿床形成的重要意义。     

横穿贝加尔湖山脉北部寒区的线性工程

The development of North Transbaikalye mineral resources (e. g. the Chiney deposit of iron titanium-vanadium-magnetite ores and Udokan copper deposits) is impossible without the establishment of industrial and transport infrastructure, one component of which are linear engineering constructions (drive railways, by-line auto roads, platform passages, protecting constructions, and others). However,on condition of spreading permafrost rocks this is conjugated with certain ecological risk just as from the transport network objects so for the objects themselves. A special attention is paid in the paper to considering of problems of projecting and constructing railways on the Udokan ridge.     

多年冻土地区金刚石矿的环境问题--以Yakutia 西北部Anabar矿为例

Placer diamond mining in the Anabar area involves various operations that cause long-term (nearly a quarter of a century) environmental impacts. The long history of mining activities, the technology used to mine the placers, as well as the poor assimilative capacity of the natural systems can result in serious environmental impacts in the area. The primary geochemical processes in the diamond-bearing area are affected by the occurrence of permafrost and relict ice, the lengthy duration of ice cover in water bodies, and the widespread development of cryogenic processes. This promotes physical migration of contaminants, cryogenic metamorphization of waters, and long-term accumulation of organic contaminants in low-temperature, reduction and sedimentation barriers. In this paper, some environmental and geochemical effects of diamond mining in the Arctic area are discussed.     

探测冰盖和多年冻土层的融冰探头研发

The exploration of ice sheets by melting vertical holes into the ground has some tradition in terrestrial glaciology. Such probes have been used since the 1960's to investigate the vertical structure of the ice in Greenland and Antarctica and in alpine glaciers. In this paper we look into the possibility to develop similar devices for use on extraterrestrial icy bodies, like e.g. the polar areas on Mars or the icy satellites of the outer solar system. We report on some basic experiments performed in the cryo-vacuum laboratory of the Space Research Institute of the Austrian Academy of Sciences, Graz. In these experiments the penetration of a simple melting probe into compact and porous water ice (with a snow-like texture) was monitored, both under vacuum conditions and under air pressure. The observed penetration speeds for a given power supply are compared with a simple mathematical model. We conclude that a miniature melting probe with small overall dimensions and a reasonable power demand could well be part of the payload of a future planetary mission, for example to the poles of Mars. Such missions are currently under discussion in several space agencies. Moreover such probes could also e? ectively be used in terrestrial environments. A possible design is presented at the end of the paper.     

Evolution of sand waves in the Messina Strait, Italy

In the present paper the morphodynamics of sand waves in the Messina Strait, Italy, is analysed by comparing data gathered during two different surveys carried out in 1991 and 2001, respectively. In particular, a morphometric analysis on the most recent data and a qualitative analysis of the differences between bottom bedform patterns, are carried out. At locations characterised by greater depths, only minor changes to the planimetric configuration of the field, i.e. crest orientation (which is seen to be orthogonal to the direction of net gross sand transport) and wave length are observed, while differences in wave length and crest direction are more evident in more shallow areas. On the other hand, wave height has significantly increased in the whole field. A possible explanation of such a change, based on the previsions of a theory which relates sand-wave growth and migration to the main components of the tidal ellipse, is provided.Responsible Editor: Jens Kappenberg