Comparison of two creep degradation modeling approaches for soft structured soils

The creep degradation is a common phenomenon for soft structured clays. In this paper, the creep degradation behavior for soft structured clays is first studied by combining intrinsic creep behavior and the structure indicator. A creep-implicit model and a creep-explicit model corresponding to a stress-based and a creep-based structure indicators are developed, respectively, under one-dimensional condition. Parameters determination for both models is straightforward from oedometer tests. Coupled with consolidation theory, both models are used to simulate oedometer tests with different structural levels and load durations on three clays. The predictive ability of the two models on creep behavior, creep degradation behavior and evolution of structure indicator is analyzed. The relationship between the two structure indicators is discussed based on experimental results. The comparison between experimental and numerical results demonstrates that both models can accurately describe the creep degradation behavior of soft structured clay under one-dimensional loading.     

On the quantitative evaluation of metamorphic fluid composition: Verification of the results of physicochemical simulations for water-mineral-rock reactions

This paper reports the results of a comparison of the qualitative physicochemical simulations (by the Winsel program complex) of the composition of the reacting fluid with experimental data on the water-electrolyte (NaCl, HCl, NaOH, and KOH)-mineral (quartz, corundum, microcline, and plagioclase) system and the water-electrolyte-rock (granite and pelite) system at 400–800°C and 1–10 kbar. Constraints are proposed for the temperature, pressure, and the composition of the electrolyte at which the simulation results are consistent with the experimental data.     

Non-tidal changes in the length of the day: 700 BC to AD 1982

Occultations and eclipses from ancient times down to the present are analysed to determine changes in the length of the day. By subtracting the expected tidal contribution from the observed changes, the non-tidal variations are obtained. The non-tidal varations are shown to occur on time-scales of decades and millennia.     

Influence of compound bedforms on hydraulic roughness in a tidal environment

The effect exerted by the seabed morphology on the flow is commonly expressed by the hydraulic roughness, a fundamental parameter in the understanding and simulation of hydro- and sediment dynamics in coastal areas. This study quantifies the hydraulic roughness of large compound bedforms throughout a tidal cycle and investigates its relationship to averaged bedform dimensions. Consecutive measurements with an acoustic Doppler current profiler and a multibeam echosounder were carried out in the Jade tidal channel (North Sea, Germany) along large compound bedforms comprising ebb-oriented primary bedforms with superimposed smaller secondary bedforms. Spatially averaged velocity profiles produced log-linear relationships which were used to calculate roughness lengths. During the flood phase, the velocity profiles were best described by a single log-linear fit related to the roughness created by the secondary bedforms. During the ebb phase, the velocity profiles were segmented, showing the existence of at least two boundary layers: a lower one scaling with the superimposed secondary bedforms and an upper one scaling with the ebb-oriented primary bedforms. The drag induced by the primary bedform during the ebb phase is suggested to be related to flow expansion, separation, and recirculation on the downstream side of the bedform. Three existing formulas were tested to predict roughness lengths from the local bedform dimensions. All three predicted the right order of magnitude for the average roughness length but failed to predict its variation over the tidal cycle.     

Photocatalytic Activity of Combustion Synthesized Nanocrystalline CeAlO3

The photocatalytic activity of combustion synthesized nanocrystalline CeAlO₃ was determined for the degradation of four anionic and four cationic dyes. The perovskite oxide showed high‐photocatalytic activity and a complete degradation of all the dyes was possible within 2 h. The photocatalytic activity of the compound was comparable with the activity of the commercial Degussa P‐25 TiO₂ catalyst. The degradation of dyes was found to follow first order kinetics and the first order degradation rate constants were determined.     

State-of-the art and future of earthquake early warning in the European region

European researchers and seismic networks are active in developing new approaches to earthquake early warning (EEW), implementing and operating test EEW systems, and in some cases, offering operational EEW to end users. We present the key recent developments in EEW research in Europe, describe the networks and regions where EEW is currently in testing or development, and highlight the two systems in Turkey and Romania that currently provide operational systems to a limited set of end users.     

The analysis of drainage network composition

The Horton method of analyzing drainage network composition is reviewed, with the conclusion that it has not been very effective either in improving understanding or in developing useful methods of characterizing drainage basins. New methods which are based on the link rather than the Horton (or Strahler) stream are described. A number of detailed examples of the application of these new methods to the topologic and geometric properties of networks are provided. The results are compared with the predictions of the random model. Data used in the analysis were obtained from 1:24,000 U.S.G.S. topographic maps of eastern Kentucky. Thirty drainage basins were selected and their channel networks were outlined first by the contour-crenulation (CC) method and then by another, more objective, method (SC) in which stream sources were identified by a quantitative slope criterion. The CC and SC samples comprise about 8,700 and 1,700 links, respectively. The three most important results of the analysis are: (1) the channel networks are slightly but significantly more elongated than predicted by the random model, (2) there are fewer second magnitude links than predicted, and (3) the length distribution for interior links depends upon the kind of link (interior or exterior) joined downstream. These features are found in both CC and SC networks.     

Variation of mineral composition,fabric and oxygen fugacity from massive to foliated eclogites during exhumation of subducted ocean crust in the North Qilian suture zone,NW China

Eclogites from the North Qilian suture zone are high‐pressure low‐temperature metamorphic rocks of ocean crust protolith, and occur in both massive and foliated varieties as individual blocks of tens to hundreds of metres in size. The massive type is weakly deformed and shows granoblastic texture characterized by a coarse‐grained peak mineral assemblage of Grt¹ + Omp¹ + Ph + Rt ± Lws (or retrograde Cz). In contrast, the foliated type is strongly deformed and shows a fine‐grained retrograde mineral assemblage of Grt² + Omp² + Cz + Gln + Ph. Both total FeO and aegirine contents in omphacite, as well as X_Fe[=Fe³⁺/(Fe³⁺ + Al^VI)] in clinozoisite/epidote, increase significantly from massive to foliated eclogites. Lattice preferred orientation (LPO) of omphacite, determined by electron back‐scatter diffraction analysis, is characterized by weak and strong SL‐type fabrics for massive and foliated eclogites, respectively. Clinozoisite/epidote also developed SL‐type fabric, but different from the LPOs of omphacite in <010> and <001> axes, owing to their opposite crystallographic long and short axis definitions. The transition of deformation mechanism from dislocation creep to diffusive mass transfer (DMT) creep in omphacite and the concomitant retrograde metamorphism both are efficiently facilitated when the original coarse‐grained Omp¹ + Grt¹ + Lws assemblage is dynamically recrystallized and retrogressed into the fine‐grained Fe³⁺‐rich assemblage of Omp² + Grt² + Cz + Gln. The DMT process with concomitant anisotropic growth assisted by fluids is considered to be an important deformation mechanism for most minerals in the foliated eclogite. P–T estimates yielded 2.3–2.6 GPa and 485?510 °C for the massive eclogite and 1.8–2.2 GPa and 450?480 °C for the foliated eclogite. The significant increase in total Fe and Fe³⁺ contents in omphacite and clinozoisite/epidote from massive to foliated eclogite suggests changes in mineral compositions accompanied by an increase in oxygen fugacity during ductile deformation associated with exhumation. The LPO transition of omphacite, clinozoisite and rutile from weak SL‐type in massive eclogites to strong SL‐type in foliated eclogites is interpreted to represent the increment of shear strain during exhumation along the ‘subduction channel’.     

Holocene reef growth in Torres Strait

The platform and fringing reefs of Torres Strait are morphologically similar to reefs of the northern Great Barrier Reef to the south, except that several are elongated in the direction of the strong tidal currents between the Coral Sea and the Gulf of Carpentaria. Surface and subsurface investigations and radiocarbon dating on Yam, Warraber and Hammond Islands reveal that the initiation and mode of Holocene reef growth reflect antecedent topography and sea-level history. On the granitic Yam Island, fringing reefs have established in some places over a Pleistocene limestone at about 6 m depth around 7000 years BP. Emergent Holocene microatolls of Porites sp. indicate that the reefs have prograded seawards while sea level has fallen gradually from at least 0.8 m above present about 5800 years BP. On the Warraber Island reef platform drilling near the centre indicated a Pleistocene limestone foundation at a depth of about 6 m over which reefs established around 6700 years BP. Reef growth lagged behind that on Yam Island. Microatolls on the mature reef flat indicate that the reef reached sea level around 5300 years BP when the sea was around 0.8–1.0 m above present. On the reef flat on the western side of Hammond Island bedrock was encountered at 7–8 m depth, overlain by terrigenous mud. A progradational reef sequence of only 1–2 m thickness has built seaward over these muds, as sea level has fallen over the past 5800 years. Reef-flat progradation on these reefs is interpreted to have occurred by a series of stepwise buildouts marked by lines of microatolls parallel to the reef crest, marking individual coalescing coral heads. Detrital infill has occurred between these. This pattern of reef progradation is consistent with the radiocarbon dating results from these reefs, and with seismic investigations on the Torres Reefs.     

Evaluation of MM5 mesoscale model at local scale for air quality applications over the Swedish west coast: Influence of PBL and LSM parameterizations

Summary The performance of MM5 mesoscale model (Version 3.6.3) using different planetary boundary layer (PBL) and land surface model (LSM) parameterizations is evaluated and compared using high temporal and spatial resolution G?TE2001 campaign data at local scale (a few kilometers) over the Greater G?teborg area along the Swedish west coast during 7–20 May 2001. The focus is on impact of PBL and LSM parameterizations on simulated meteorological variables important for air quality applications such as global radiation, diurnal cycle of near-surface air temperature and wind, diurnal cycle intensity, near-surface vertical temperature gradient, nocturnal temperature inversion, boundary layer height, and low-level jet (LLJ). The model performance for daytime and nighttime and under different weather conditions is also discussed. The purpose is to examine the performance of the model using different PBL and LSM parameterizations at local scale in this area for its potential applications in air quality modeling. The results indicate that the influence of PBL and LSM parameterizations on simulated global radiation, diurnal cycle of near-surface air temperature and wind speed, diurnal cycle intensity, vertical temperature gradient, nocturnal temperature inversion and PBL heights, which are critical parameters for air quality applications, is evident. Moreover, the intensity and location of LLJ are simulated well by all schemes, but there also exist some differences between simulated results by using different PBL and LSM schemes. Therefore, the choice of PBL and LSM parameterizations is important for MM5 applications to air quality studies. Correspondence: Junfeng Miao, Department of Earth Sciences, G?teborg University, P.O. Box 460, 405 30 G?teborg, Sweden