Tidal fluxes of nutrients and suspended sediments at the North Inlet–Winyah Bay National Estuarine Research Reserve

Beginning June of 1993 suites of 13 water samples have been collected at Oyster Landing, North Inlet (SC), every 20 days covering two consecutive tidal cycles at 2.07 h intervals. In order to ascertain whether this large (and still growing) water chemistry data set can be used to determine tidal fluxes of nutrients and sediments, we coupled measured concentrations to estimates of instantaneous tidal discharge based on a basin water storage curve and hindcast tides. The mean advective fluxes of all constituents, including salt, showed statistically significant exports. This result, however, is largely due to an ebb bias in the sampling protocol, which resulted in 52% of the samples being collected on ebb tide versus a theoretical percentage of 48%. When this bias was corrected by reducing the mean discharge (−610 l s⁻¹) to a value (−125 l s⁻¹) that produced a balance between the mean advective and dispersive salt fluxes, the advective fluxes of the other constituents were reduced to values that are not significantly different from zero. In addition to a statistically significant dispersive influx of salt, significant dispersive exports were found for DON, NH₄, DOP, PO₄ and DOC. All particulate constituents (PN, PP, ISS and OSS) yielded dispersive fluxes that were not significantly different from zero. Annual material budgets for the Oyster Landing basin based on the dispersive fluxes of all constituents (except salt) are generally similar in magnitude and direction to those measured by [Dame, R.F., Spurrier, J.D., Williams, T.M., Kjerfve, B., Zingmark, R.G., Wolaver, T.G., Chrzanowski, T.H., McKeller, H.N., Vernberg, F.J., 1991. Annual material processing by a salt marsh-estuarine basin in South Carolina, USA. Marine Ecology Progress Series 72, 153–166.] in the nearby and ecologically similar Bly Creek basin, indicating that the dispersive fluxes determined in this study are realistic. We offer suggestions for improving the reliability and usefulness of future Oyster Landing water quality data.     

Isotopic and Elemental Variations of Carbon and Nitrogen in a Mangrove Estuary

Variations in elemental and isotopic ratios of suspended particulate matter (SPM) were investigated in the Guayas River Estuary Ecosystem (GREE) that empties into the Gulf of Guayaquil, Ecuador. Detritus in the system was identified on the basis of extremely high carbon:chlorophyll aratios (>1000). This material had mean δ¹³C of −26·4±0·3, δ¹⁵N of +4·8±0·2, and (C:N)_atomicof 14·1±0·9. The isotopic data were comparable to measurements reported for fresh and degrading mangrove leaves, whereas the elemental ratio was comparatively enriched in nitrogen. Isotope measurements of SPM throughout the GREE were more similar to values for riverine material and detritus compared with that for the coastal end-member. Values indicative ofin situproduced algae, sewage and shrimp pond effluent were only found at selected sites. Bacterial bioassays, which were used to document potential sources of dissolved organic matter in the GREE, were isotopically similar to SPM. This correspondence coupled with the relatively low (C:N)_aof SPM could be explained by bacterial immobolization of nitrogen onto detritus. Finally, tidal variations of (C:N)_aand δ¹³C at a brackish mangrove site were similar in magnitude to spatial variations encountered throughout the GREE. Based on these results, the authors caution that care must be taken when samples are taken for food-web studies in these systems.     

The impact of wave loads and pore-water pressure generation on initiation of sediment transport

The build-up of pore-water pressure by waves can lead to sediment liquefaction and subsequent transport by traction currents. This process was investigated by measuring pore-water pressures both in a field experiment and laboratory wave tank tests. Liquefaction was observed in the wave tank tests. The results suggest that sand is less susceptible than silts to wave-induced liquefaction because of the tendency to partially dissipate pore-water pressures. However, previous studies have determined that pore-water pressures must approach liquefaction before current velocities necessary to initiate transport are reduced. Once liquefaction has occurred more sediment can be transported.     

Wavelet analysis of bathymetric sidescan sonar data for the classification of seafloor sediments in Hopvågen Bay - Norway

In this paper we examine the use of bathymetric sidescan sonar for automatic classification of seabed sediments. Bathymetric sidescan sonar, here implemented through a small receiver array, retains the advantage of sidescan in speed through illuminating large swaths, but also enables the data gathered to be located spatially. The spatial location allows the image intensity to be corrected for depth and insonification angle, thus improving the use of the sonar for identifying changes in seafloor sediment. In this paper we investigate automatic tools for seabed recognition, using wavelets to analyse the image of Hopvågen Bay in Norway. We use the back-propagation elimination algorithm to determine the most significant wavelet features for discrimination. We show that the features selected present good agreement with the grab sample results in the survey under study and can be used in a classifier to discriminate between different seabed sediments.     

Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.     

Code of Practice For Ocean Mining: An International Effort to Develop a Code For Environmental Management of Marine Mining

A code of practice for ocean mining has been developed by the International Marine Minerals Society. The code provides general guiding Principles for development of marine mineral resources and delineates Operating Guidelines for application, as appropriate, at specific mining sites. In total 11 operating guidelines are provided to serve as benchmarks for industry and targets for regulatory agencies and other stakeholders. They include the following commitments: •To sustainable development, •To environmentally responsible corporate ethics, •To the development of effective community partnership, •To implementation of environmental risk management, •To the integration of environmental management into all phases of development, •To the establishment of corporate environmental performance targets, •To timely environmental improvements and upgrading, •To responsible rehabilitation of operations sites and decommissioning of facilities, and •To accurate and timely, reporting and documentation, archiving, and performance review.     

An ocean bottom,microprocessor based seismometer

We describe the design and construction of an ocean bottom seismometer configured as a computer, based on an Intersil IM6100 microprocessor plus appropriate peripheral devices. The sensors consist of triaxial 1 Hz seismometers and a hydrophone, each sensor channel being filtered prior to digitizing so that typical noise spectra are whitened. Digital data are recorded serially on magnetic tape. The instrument is placed on the ocean bottom by allowing it to fall freely from just below the surface. An acoustic system allows precise determination of instrument position, acoustic recall, and transmission of operational information to the surface. Release from an expendable anchor is accomplished by redundant pyrotechnic bolts which can be fired by acoustic command or by precision timers.The operational flexibility provided by the micro-computer, which executes the DEC PDP8/E instruction set, enables optimum use of the 6-hr recording capacity (at 128 samples/second/channel) in the context of the particular experiment being performed.

---

     

Nature and composition of shore-zone sediments between Jeddah and Yanbu, eastern Red Sea

The shore-zone sediments between Jeddah and Yanbu, west coast of Saudi Arabia, are composed mostly of skeletal carbonate sands. The nearshore sediments containing benthic foraminifera, algal fragments and molluscs are multimodal, the mean grain size varying between 0.76 and 2.35 ø. The beach sediments, except samples dominated by cerithid gastropods in some localities, are relatively finer than the nearshore sediments. Although the beaches to a great extent comprise sand-sized material, fine lime muds and coarse clastic gravels occur in certain areas. The dune sediments comprising mostly algal grains and ooids are very fine with 50 percent of the material in the 0.25–0.18 mm size grade. Except a general northward decrease in mean grain size, regional trends in the textural parameters of the sediments between Jeddah and Yanbu are not quite apparent. Lateral variations in the textural characteristics suggest a landward migration of the sediments in the shore zone under the influence of northerly and northwesterly winds. The carbon and oxygen (δ ¹³C + 4.80 to 4.84‰ PDB) (δ ¹³O − 0.04 to + 0.53‰ PDB) isotopic ratios of the lime muds occurring in certain shallow margins in the shore-zone, which are much higher than those of the green algae, indicate that the fine carbonates are at least in part inorganic in origin.

Like the shallow-water carbonates in tropical seas, aragonite and high Mg-calcite are the dominant carbonate minerals in the shore-zone sediments. There is a landward increase in aragonite contents caused by the landward migration of fine material from the nearshore. The dominant clay mineral in the nearshore sediments is kaolinite with subordinate swelling chlorite and little illite. Kaolinite is contributed by the coastal regions under the sub-tropical humid climate. Swelling chlorite is considered to have been formed in the nearshore by mechanical mixture of chlorite and montmorillonite derived from the metamorphic and igneous terrains of the Tertiary mountains bordering the coastal plain.     

Model estimates for the mean gas exchange between the ocean and the atmosphere under the conditions of the present-day climate and its changes expected in the 21st century

Annual mean fluxes of CO₂ and oxygen across the sea surface are estimated with the use of numerical modeling for several regions located in the Gulf Stream and Kuroshio zones. The present-day climatic conditions and the climatic conditions expected in the middle and at the end of the 21st century are considered. Specific features of gas exchange under a strong wind that are associated with gas exchange by bubbles and with changes in the air-water difference of the gas concentrations were taken into account in the calculations. The estimates obtained differ substantially from the results based on the traditional approach, which disregards the above features. A considerable increase in the absorption of CO₂ by the ocean, which is mainly caused by the continuing increase in the CO₂ concentration in the air during its small changes in the ocean, is expected in the 21st century. At the same time, no trends are revealed in the annual mean fluxes of oxygen across the ocean surface. The conclusion is made that, in calculations of CO₂ absorption by the world ocean, it is necessary to take into account both specific features of gas transfer under a strong wind and an increase in the atmospheric concentration of CO₂.