The evolution of the polymetamorphic basement in the Central Alps unravelled by precise U−Pb zircon dating

The U–Pb age determinations of zircon and rutile from the Aar massif reveal a complex evolution of the Central Alpine basement. The oldest components are found in zircons of metasediments, which bear cores of Archean age; the U–Pb age of discordant prismatic zircons of the same rocks ranges between 580 and 680 Ma, an age that is typical for Pan-African metamorphism. The zircons are interpreted as Pan-African detritus with Archean inheritance. The provenance region of the Pan-African zircons is assumed to be a terrane of Gondwana-affinity, i.e. the W. African craton or the Pentevrian microplate. The Caledonian metamorphism left a pervasive structural imprint in amphibolite facies on the rocks of the Aar massif; it is dated at 456±2 and 445 Ma by zircons of a layered migmatitic gneiss and a migmatitic leucosome, respectively, both occurring in the northernmost zones of the massif. Hercynian metamorphism never exceeded greenschist-facies conditions and is recorded by zircon in a garnet-amphibolite and by rutile in a meta-psammite that yield an age of 330 Ma. Both zircon and rutile are considered to be products of retrograde mineral reactions and therefore do not date the peak conditions of Hercynian metamorphism. The Gastern granite at the western end of the Aar massif is a contaminated granite that intruded at 303±4 Ma, contemporaneously with the wide-spread late Hercynian post-collisional I-type magmatism. The study demonstrates the potential of isotope dilution U–Pb dating of single grains and microfractions in deciphering complex evolutionary histories of polymetamorphic terrains.     

A Common Reference Material for Cadmium Isotope Studies – NIST SRM 3108

Research into natural mass‐dependent stable isotope fractionation of cadmium has rapidly expanded in the past few years. Methodologies are diverse with MC‐ICP‐MS favoured by all but one laboratory, which uses thermal ionisation mass spectrometry (TIMS). To quantify the isotope fractionation and correct for instrumental mass bias, double‐spike techniques, sample‐calibrator bracketing or element doping has been used. However, easy comparison between data sets has been hampered by the multitude of in‐house Cd solutions used as zero‐delta reference in different laboratories. The lack of a suitable isotopic reference material for Cd is detrimental for progress in the long term. We have conducted a comprehensive round‐robin assay of NIST SRM 3108 and the Cd isotope offsets to commonly used in‐house reference materials. Here, we advocate NIST SRM 3108 both as an isotope standard and the isotopic reference point for Cd and encourage its use as ‘zero‐delta’ in future studies. The purity of NIST SRM 3108 was evaluated regarding isobaric and polyatomic molecular interferences, and the levels of Zn, Pd and Sn found were not significant. The isotope ratio ¹¹⁴Cd/¹¹⁰Cd for NIST SRM 3108 lies within ～ 10 ppm Da^?1 of best estimates for the Bulk Silicate Earth and is validated for all measurement technologies currently in use.     

Electrodynamic Disaggregation: Does it Affect Apatite Fission-Track and (U-Th)/He Analyses?

Apatite fission-track and (U-Th)/He analyses require the liberation of intact idiomorphic apatite grains from rock samples. While routinely being carried out by mechanical methods, electrodynamic disaggregation (ED) offers an alternative approach. The high-voltage discharges produced during the ED process create localised temperature peaks (10000 K) along a narrow plasma channel. In apatite, such high temperatures could potentially reduce the length of fission tracks, which start to anneal at temperatures > 60 °C, and could also enhance He diffusion, which becomes significant at 30–40 °C over geological time scales. A comparison of fission-track analyses and (U-Th)/He ages of apatites prepared both by mechanical (jaw crusher, disk mill) and ED processing provides a way of determining whether heating during the latter method has any significant effect. Apatites from three samples of different geological settings (an orthogneiss from Madagascar, the Fish Canyon Tuff, and a muscovite-gneiss from Greece) yielded statistically identical track length distributions compared to samples prepared mechanically. Additionally, (U-Th)/He ages of apatites from a leucogranite from Morocco prepared by both methods were indistinguishable. These first results indicated that during electrodynamic disaggregation apatite crystals were not heated enough to partially anneal the fission tracks or induce significant diffusive loss of He.     

Lower crustal melting and the role of open-system processes in the genesis of syn-orogenic quartz diorite–granite–leucogranite associations: constraints from Sr–Nd–O isotopes from the Bandombaai Complex, Namibia

The Bandombaai Complex (southern Kaoko Belt, Namibia) consists of three main intrusive rock types including metaluminous hornblende- and sphene-bearing quartz diorites, allanite-bearing granodiorites and granites, and peraluminous garnet- and muscovite-bearing leucogranites. Intrusion of the quartz diorites is constrained by a U–Pb zircon age of 540±3 Ma.

Quartz diorites, granodiorites and granites display heterogeneous initial Nd- and O isotope compositions (_{Nd (540 Ma)}=−6.3 to −19.8; δ¹⁸O=9.0–11.6‰) but rather low and uniform initial Sr isotope compositions (⁸⁷Sr/⁸⁶Sr_initial=0.70794–0.70982). Two leucogranites and one aplite have higher initial ⁸⁷Sr/⁸⁶Sr ratios (0.70828–0.71559), but similar initial _Nd (−11.9 to −15.8) and oxygen isotope values (10.5–12.9‰). The geochemical and isotopic characteristics of the Bandombaai Complex are distinct from other granitoids of the Kaoko Belt and the Central Zone of the Damara orogen. Our study suggests that the quartz diorites of the Bandombaai Complex are generated by melting of heterogeneous mafic lower crust. Based on a comparison with results from amphibolite-dehydration melting experiments, a lower crustal garnet- and amphibole-bearing metabasalt, probably enriched in K₂O, is a likely source rock for the quartz diorites. The granodiorites/granites show low Rb/Sr (<0.6) ratios and are probably generated by partial melting of meta-igneous (intermediate) lower crustal sources by amphibole-dehydration melting. Most of the leucogranites display higher Rb/Sr ratios (>1) and are most likely generated by biotite-dehydration melting of heterogeneous felsic lower crust. All segments of the lower crust underwent partial melting during the Pan-African orogeny at a time (540 Ma) when the middle crust of the central Damara orogen also underwent high T, medium P regional metamorphism and melting. Geochemical and isotope data from the Bandombaai Complex suggest that the Pan-African orogeny in this part of the orogen was not a major crust-forming episode. Instead, even the most primitive rock types of the region, the quartz diorites, represent recycled lower crustal material.     

Magmatic-to-hydrothermal crystallization in the W–Sn mineralized Mole Granite (NSW, Australia): Part I: Crystallization of zircon and REE-phosphates over three million years—a geochemical and U–Pb geochronological study

Zircon, monazite and xenotime crystallized over a temperature interval of several hundred degrees at the magmatic to hydrothermal transition of the Sn and W mineralized Mole Granite. Magmatic zircon and monazite, thought to have crystallized from hydrous silicate melt, were dated by conventional U–Pb techniques at an age of 247.6 ± 0.4 and 247.7 ± 0.5 Ma, respectively. Xenotime occurring in hydrothermal quartz is found to be significantly younger at 246.2 ± 0.5 Ma and is interpreted to represent hydrothermal growth. From associated fluid inclusions it is concluded that it precipitated from a hydrothermal brine ≤ 600 °C, which is below the accepted closure temperature for U–Pb in this mineral. These data are compatible with a two-stage crystallization process: precipitation of zircon and monazite as magmatic liquidus phases in deep crustal magma followed by complete crystallization and intimately associated Sn–W mineralization after intrusion of the shallow, sill-like body of the Mole Granite. Later hydrothermal formation of monazite in a biotite–fluorite–topaz reaction rim around a mineralized vein was dated at 244.4 ± 1.4 Ma, which distinctly postdates the Mole Granite and is possibly related to a younger hidden intrusion and its hydrothermal fluid system.

Obtaining precise age data for magmatic and hydrothermal minerals of the Mole Granite is hampered by uncertainties introduced by different corrections required for multiple highly radiogenic minerals crystallising from evolved hydrous granites, including ²³⁰Th disequilibrium due to Th/U fractionation during monazite and possibly xenotime crystallization, variable Th/U ratios of the fluids from which xenotime was precipitating, elevated contents of common lead, and post-crystallization lead loss in zircon, enhanced by the fluid-saturated environment. The data imply that monazite can also survive as a liquidus phase in protracted magmatic systems over periods of 10⁶ years. The outlined model is in agreement with prominent chemical core-rim variation of the zircon.     

Holocene climate evolution of the Ugii Nuur basin,Mongolia

In order to evaluate the Holocene palaeoenvironmental evolution of the Ugii Nuur basin, central Mongolia, investigations on chemical and mineralogical properties of lacustrine sediments were carried out on a 630 cm sediment core from lake Ugii Nuur. The interpretation of the record is based on a principal component analysis （PCA） of the elemental composition of the samples. The results show that lacustrine deposition started at 10.6 kyr BP. Low lake level conditions were identified during the Early Holocene （10.6-7.9 kyr BP）. The Mid Holocene （7.9-4.2 kyr BP） was characterized by generally higher lake levels and thus higher moisture supply, but it experienced strong climatic fluctuations. Arid conditions prevailed from 4.2-2.8 kyr BP and were followed by a stable, more humid phase until today.     

Review of numerical methods for nonhydrostatic weather prediction models

Summary ?Currently available computer power allows to run operational numerical weather prediction models at resolutions higher than 10 km. The aim of such high resolution modeling is the prediction of local weather, including orographically induced winds and local precipitation patterns. In this range the hydrostatic approximation is no longer valid and nonhydrostatic models have to be used instead. For several decades these models have been developed for research purposes only, but operational application is now reality. In this paper, the numerical methods used in current nonhydrostatic forecast models will be reviewed and some promising techniques in this field will be discussed. Special attention is given to aspects such as the choice of the vertical coordinate, the efficiency of algebraic solvers for semi-implicit time discretizations, and accurate and non-oscillatory advection schemes. Received July 6, 2001; revision October 12, 2001     

Air Pollution Transport in an Alpine Valley: Results From Airborne and Ground-Based Observations

An observational dataset from a wintertime field campaign in the Inn Valley, Austria, is analysed in order to study mechanisms of air pollution transport in an Alpine valley. The results illustrate three types of mechanisms: transport by a density current, back-and-forth transport by valley winds, and transport by slope winds. The first type is associated with an air mass difference along the valley. Cooler air located in the lower part of the valley behaves like a density current and produces the advection of pollutants by upvalley winds. In the second type, strong horizontal gradients in pollution concentrations exist close to ground. Multiple wind reversals result in a back-and-forth transport of pollutants by weak valley winds. In the third type, upslope winds during daytime decrease low-level pollution concentrations and cause the formation of elevated pollution layers.     

High resolution regional climate model simulations for Germany: Part II—projected climate changes

The projected climate change signals of a five-member high resolution ensemble, based on two global climate models (GCMs: ECHAM5 and CCCma3) and two regional climate models (RCMs: CLM and WRF) are analysed in this paper (Part II of a two part paper). In Part I the performance of the models for the control period are presented. The RCMs use a two nest procedure over Europe and Germany with a final spatial resolution of 7 km to downscale the GCM simulations for the present (1971–2000) and future A1B scenario (2021–2050) time periods. The ensemble was extended by earlier simulations with the RCM REMO (driven by ECHAM5, two realisations) at a slightly coarser resolution. The climate change signals are evaluated and tested for significance for mean values and the seasonal cycles of temperature and precipitation, as well as for the intensity distribution of precipitation and the numbers of dry days and dry periods. All GCMs project a significant warming over Europe on seasonal and annual scales and the projected warming of the GCMs is retained in both nests of the RCMs, however, with added small variations. The mean warming over Germany of all ensemble members for the fine nest is in the range of 0.8 and 1.3 K with an average of 1.1 K. For mean annual precipitation the climate change signal varies in the range of ?2 to 9 % over Germany within the ensemble. Changes in the number of wet days are projected in the range of ±4 % on the annual scale for the future time period. For the probability distribution of precipitation intensity, a decrease of lower intensities and an increase of moderate and higher intensities is projected by most ensemble members. For the mean values, the results indicate that the projected temperature change signal is caused mainly by the GCM and its initial condition (realisation), with little impact from the RCM. For precipitation, in addition, the RCM affects the climate change signal significantly.