Searching for an intrinsic stellar population in compact high-velocity clouds

We are investigating the hypothesis that Compact High-Velocity Clouds (CHVCs) are the left-over building blocks of Local Group galaxies. To this end, we are searching for their embedded stellar populations using FORS at the VLT. The search is done with single-star photometry in V and I bands, which is sensitive to both, young and old, stellar populations. Five CHVCs of our sample have been observed so far down to I=24. We pointed the VLT towards the highest HI column density regions, as determined in Effelsberg radio data. In an alternate approach, we searched 2MASS public data towards those 5 CHVCs down to K=16. While the VLT data probe the central regions out to distance moduli of about 27, the 2MASS data are sensitive to a population of red giant stars to distance moduli of about 20. The 2MASS data, on the other hand, cover a much wider field of view than the VLT data (radius of 1 degree versus FORS field of 6.8 arcmin). We did not find a stellar population intrinsic to the CHVCs in either data. In this paper, we illustrate our search methods. This revised version was published online in August 2006 with corrections to the Cover Date.     

Geochemistry and Rb–Sr geochronology of a ductile shear zone in the Orlica-Śnieżnik dome (West Sudetes, Poland)

Amphibolite-facies orthogneisses of the Orlica-vnie™nik dome in the West Sudetes (Poland) show a local continuous transition from weakly deformed augen gneisses to finely laminated mylonites. Field evidence indicates that ductile shearing developed pre- or syntectonically to a migmatization event. Bulk-rock compositions of variably deformed samples yield no indications for deformation- and/or fluid-enhanced element mobility and redistribution. ⁸⁷Rb-⁸⁶Sr geochronology (biotite, phengite, whole rock) places time constraints on the deformation process and the post-orogenic cooling history. Phengite- and biotite-whole-rock pairs yield Rb-Sr ages of 340 to 334 Ma and 335 to 294 Ma, respectively, independent of the degree of deformation. The weighted mean of phengite-whole-rock pairs indicates an age of 337.4DŽ.3 Ma. Combining most of the biotite-whole-rock data yields a weighted mean age of 328.6dž.4 Ma. Because of their different closure temperatures for the Rb-Sr system, these differences are interpreted to date cooling after a thermal event. Direct dating of the deformation is not possible, but the cooling history record defines a minimum age for the development of ductile shearing and the last migmatization event. These time constraints provide evidence for the initiation of crustal collapse during or immediately following peak metamorphic conditions. The results of this study further document the importance of Variscan metamorphism in the Orlica-vnie™nik dome.     

Elimination of source-generated noise from correlated vibroseis data (the ‘ghost-sweep’ problem)

The most common noise-reduction methods employed in the vibroseis technique (e.g. spike and burst reduction, vertical stacking) are applied in the field to reduce noise at a very early stage. In addition, vibrator phase control systems prevent signal distortions produced by non-linearity of the source itself. However, the success of these automatic correction methods depends on parameter justification by the operator and the actual characteristics of the distorting noise. More specific noise-reduction methods (e.g. Combisweep (Trade mark of Geco-Prakla), elimination of harmonics) increase production costs or need uncorrelated data for the correction process. Because the field data are usually correlated and vertically stacked in the field to minimize logistical and processing costs, it is not possible to make subsequent parameter corrections to optimize the noise reduction after correlation and vertical stacking of a production record. The noise-reduction method described here uses the final recorded, correlated and stacked vibroseis field data. This method eliminates signal artifacts caused e.g. by incorrect vibroseis source signals being used in parameter estimation when a frequency–time analysis is combined with a standard convolution process. Depending on the nature of the distortions, a synthetically generated, nearly recursive noise-separation operator compresses the noise artifact in time using a trace-by-trace filter. After elimination of this compressed noise, re-application of the separation operator leads to a noise-corrected replacement of the input data. The method is applied to a synthetic data set and to a real vibroseis field record from deep seismic sounding, with good results.     

Episodic Cenozoic volcanism and tectonism in the Andes of Peru

Radiometric and geologic information indicate a complex history of Cenozoic volcanism and tectonism in the central Andes. K-Ar ages on silicic pyroclastic rocks demonstrate major volcanic activity in central and southern Peru, northern Chile, and adjacent areas during the Early and Middle Miocene, and provide additional evidence for volcanism during the Late Eocene. A provisional outline of tectonic and volcanic events in the Peruvian Andes during the Cenozoic includes: one or more pulses of igneous activity and intense deformation during the Paleocene and Eocene; a period of quiescence, lasting most of Oligocene time; reinception of tectonism and volcanism at the beginning of the Miocene; and a major pulse of deformation in the Middle Miocene accompanied and followed through the Pliocene by intense volcanism and plutonism. Reinception of igneous activity and tectonism at about the Oligocene-Miocene boundary, a feature recognized in other circum-Pacific regions, may reflect an increase in the rate of rotation of the Pacific plate relative to fixed or quasifixed mantle coordinates. Middle Miocene tectonism and latest Tertiary volcanism correlates with and probably is genetically related to the beginning of very rapid spreading at the East Pacific Rise.     

Origin of composite dikes in the Gouldsboro granite, coastal Maine

Composite dikes, consisting of aphyric basaltic margins and phenocryst-rich rhyolitic interiors, cut the Gouldsboro granite of coastal Maine at many localities. Limited hybridization (exchange of crystals, commingling, and mixing) occurs in most of the dikes and indicates that the two magmas were contemporaneous with emplacement of rhyolitic magma following closely in time the initial emplacement of the basaltic dike. Petrographic characteristics and geochemistry indicate that the source of the rhyolite was resident magma in the Gouldsboro granite magma chamber. The composite dikes formed when basaltic dikes ruptured the Gouldsboro magma chamber, permitting partly crystallized magma from the margin of the chamber to flow outward into the center of the basaltic dikes. Field relations of similar composite dikes in other areas (e.g., Iceland, Scotland) are consistent with this model. A second type of composite dike (silicic margins with chilled basaltic pillows) commonly cuts mafic intrusions along the Maine coast and probably formed when a granitic dike ruptured an established chamber of mafic magma, permitting resident mafic magma to collapse downward into the still Liquid granitic dike. Most composite dikes have probably formed when a magma chamber was disrupted by a dike of contrasting magma rather than by tapping a stratified magma chamber.     

Another Year of Record Heat for the Oceans

Changes in ocean heat content(OHC), salinity, and stratification provide critical indicators for changes in Earth’s energy and water cycles. These cycles have been profoundly altered due to the emission of greenhouse gasses and other anthropogenic substances by human activities, driving pervasive changes in Earth’s climate system. In 2022, the world’s oceans, as given by OHC, were again the hottest in the historical record and exceeded the previous 2021 record maximum.According to IAP/CAS data, ...     

Phase boundaries in finite amplitude mantle convection

Summary. Phase boundaries are included in dynamical finite element models of mantle convection. They are represented by point chains which act as additional sources of buoyancy forces when distorted, and as additional source or sink of heat. The influence of the exothermic olivine-spinel transition is studied in both shallow and deep convection models. The flow is only slightly enhanced by the transition. The increase of temperature due to latent heat release is step-like in the deep model, in the case of shallow convection it is more diffuse. Other quantities like ocean-floor topography, gravity anomalies, and stress distribution are no more than moderately affected. In a further investigation the effect of spinel post-spinel transition, whether endothermic or exothermic, on deep convection is examined. The effect on the flow is negligibly small in both cases.     

Interpretation of Solar Magnetic Field Strength Observations

This study based on longitudinal Zeeman effect magnetograms and spectral line scans investigates the dependence of solar surface magnetic fields on the spectral line used and the way the line is sampled to estimate the magnetic flux emerging above the solar atmosphere and penetrating to the corona from magnetograms of the Mt. Wilson 150-foot tower synoptic program (MWO). We have compared the synoptic program λ5250 Å line of Fe?i to the line of Fe?i at λ5233 Å since this latter line has a broad shape with a profile that is nearly linear over a large portion of its wings. The present study uses five pairs of sampling points on the λ5233 Å line. Line profile observations show that the determination of the field strength from the Stokes V parameter or from line bisectors in the circularly polarized line profiles lead to similar dependencies on the spectral sampling of the lines, with the bisector method being the less sensitive. We recommend adoption of the field determined with the line bisector method as the best estimate of the emergent photospheric flux and further recommend the use of a sampling point as close to the line core as is practical. The combination of the line profile measurements and the cross-correlation of fields measured simultaneously with λ5250 Å and λ5233 Å yields a formula for the scale factor δ ^?1 that multiplies the MWO synoptic magnetic fields. By using ρ as the center-to-limb angle (CLA), a fit to this scale factor is δ ^?1=4.15?2.82sin?²(ρ). Previously δ ^?1=4.5?2.5sin?²(ρ) had been used. The new calibration shows that magnetic fields measured by the MDI system on the SOHO spacecraft are equal to 0.619±0.018 times the true value at a center-to-limb position 30°. Berger and Lites (2003, Solar Phys. 213, 213) found this factor to be 0.64±0.013 based on a comparison using the Advanced Stokes Polarimeter.     

Quartz as indicator mineral in the Central Swiss Alps: the quartz recrystallization isograd in the rock series of the northern Aar massif

Earlier observations on the deformation of rock-forming quartz during Alpine metamorphism that were made by Voll (1976) along a traverse following the Reuss valley (Aar massif, Central Swiss Alps) are still relevant but can be explained in more modern term. Voll found that a few kilometres south of the contact between the Aar massif and its sedimentary cover quartz has partly undergone a combination of dynamic recrystallization and nucleation along grain boundaries and fractures at the expense of the deformed parent grains. Further to the south, increasing grain growth of quartz under nearly static conditions is observed, with polygonal grain shapes typical of annealed microfabrics. Comparable stages of recrystallization could be found in several N–S traverses through the Aar massif so that “points of first occurrence” of newly formed quartz could be connected to define a quartz recrystallization isograd. This isograd extents over 90 km through the northern Aar massif, following a course parallel to the sanidine/microcline isograd but at a distance of 10–15 km further to the north. The evolution of the quartz microfabric is discussed with respect to recent estimates of the T-t path of the Aar massif.