Elimination of source-generated noise from correlated vibroseis data (the ‘ghost-sweep’ problem)

The most common noise-reduction methods employed in the vibroseis technique (e.g. spike and burst reduction, vertical stacking) are applied in the field to reduce noise at a very early stage. In addition, vibrator phase control systems prevent signal distortions produced by non-linearity of the source itself. However, the success of these automatic correction methods depends on parameter justification by the operator and the actual characteristics of the distorting noise. More specific noise-reduction methods (e.g. Combisweep (Trade mark of Geco-Prakla), elimination of harmonics) increase production costs or need uncorrelated data for the correction process. Because the field data are usually correlated and vertically stacked in the field to minimize logistical and processing costs, it is not possible to make subsequent parameter corrections to optimize the noise reduction after correlation and vertical stacking of a production record. The noise-reduction method described here uses the final recorded, correlated and stacked vibroseis field data. This method eliminates signal artifacts caused e.g. by incorrect vibroseis source signals being used in parameter estimation when a frequency–time analysis is combined with a standard convolution process. Depending on the nature of the distortions, a synthetically generated, nearly recursive noise-separation operator compresses the noise artifact in time using a trace-by-trace filter. After elimination of this compressed noise, re-application of the separation operator leads to a noise-corrected replacement of the input data. The method is applied to a synthetic data set and to a real vibroseis field record from deep seismic sounding, with good results.     

Luminescence dating of ice‐marginal deposits in northern Germany: evidence for repeated glaciations during the Middle Pleistocene (MIS 12 to MIS 6)

The exact number, extent and chronology of the Middle Pleistocene Elsterian and Saalian glaciations in northern Central Europe are still controversial. This study presents new luminescence data from Middle Pleistocene ice‐marginal deposits in northern Germany, giving evidence for repeated glaciations during the Middle Pleistocene (MIS 12 to MIS 6). The study area is located in the Leine valley south of the North German Lowlands. The data set includes digital elevation models, high‐resolution shear wave seismic profiles, outcrop and borehole data integrated into a 3D subsurface model to reconstruct the bedrock relief surface. For numerical age determination, we performed luminescence dating on 12 ice‐marginal and two fluvial samples. Luminescence ages of ice‐marginal deposits point to at least two ice advances during MIS 12 and MIS 10 with ages ranging from 461±34 to 421±25 ka and from 376±27 to 337±21 ka. The bedrock relief model and different generations of striations indicate that the older ice advance came from the north and the younger one from the northeast. During rapid ice‐margin retreat, subglacial overdeepenings were filled with glaciolacustrine deposits, partly rich in re‐worked Tertiary lignite and amber. During MIS 8 and MIS 6, the study area may have been affected by two ice advances. Luminescence ages of glaciolacustrine delta deposits point to a deposition during MIS 8 or early MIS 6, and late MIS 6 (250±20 to 161±10 ka). The maximum extent of both the Elsterian (MIS 12 and MIS 10) and Saalian glaciations (MIS 8? and MIS 6) approximately reached the same position in the Leine valley and was probably controlled by the formation of deep proglacial lakes in front of the ice sheets, preventing a further southward advance.     

Latitudinal patterns of export production recorded in surface sediments of the Chilean Patagonian fjords (41–55°S) as a response to water column productivity

The Chilean Patagonian fjords region (41–56°S) is characterized by highly complex geomorphology and hydrographic conditions, and strong seasonal and latitudinal patterns in precipitation, freshwater discharge, glacier coverage, and light regime; all of these directly affect biological production in the water column. In this study, we compiled published and new information on water column properties (primary production, nutrients) and surface sediment characteristics (biogenic opal, organic carbon, molar C/N, bulk sedimentary δ¹³C_org) from the Chilean Patagonian fjords between 41°S and 55°S, describing herein the latitudinal pattern of water column productivity and its imprint in the underlying sediments. Based on information collected at 188 water column and 118 sediment sampling sites, we grouped the Chilean fjords into four main zones: Inner Sea of Chiloé (41° to ～44°S), Northern Patagonia (44° to ～47°S), Central Patagonia (48–51°S), and Southern Patagonia (Magellan Strait region between 52° and 55°S). Primary production in the Chilean Patagonian fjords was the highest in spring–summer, reflecting the seasonal pattern of water column productivity. A clear north–south latitudinal pattern in primary production was observed, with the highest average spring and summer estimates in the Inner Sea of Chiloé (2427 and 5860 mg C m^?2 d^?1) and Northern Patagonia (1667 and 2616 mg C m^?2 d^?1). This pattern was closely related to the higher availability of nutrients, greater solar radiation, and extended photoperiod during the productive season in these two zones. The lowest spring value was found in Caleta Tortel, Central Patagonia (91 mg C m^?2 d^?1), a site heavily influenced by glacier meltwater and river discharge loaded with glacial sediments. Biogenic opal, an important constituent of the Chilean fjord surface sediments (Si_OPAL ～1–13%), reproduced the general north–south pattern of primary production and was directly related to water column silicic acid concentrations. Surface sediments were also rich in organic carbon content and the highest values corresponded to locations far away from glacier influence, sites within fjords, and/or semi-enclosed and protected basins, reflecting both autochthonous (water column productivity) and allochthonous sources (contribution of terrestrial organic matter from fluvial input to the fjords). A gradient was observed from the more oceanic sites to the fjord heads (west–east) in terms of bulk sedimentary δ¹³C_org and C/N ratios; the more depleted (δ¹³C_org ?26‰) and higher C/N (23) values corresponded to areas close to rivers and glaciers. A comparison of the Chilean Patagonian fjords with other fjord systems in the world revealed high variability in primary production for all fjord systems as well as similar surface sediment geochemistry due to the mixing of marine and terrestrial organic carbon.     

Holocene survival of the wild horse in Europe: a matter of open landscape?

The wild horse Equus ferus was one of the most frequent species of the Late Pleistocene large ungulate fauna in Eurasia and played an important role in the subsistence of human groups, especially at the end the Late Glacial. It is frequently assumed that E. ferus became extinct in Europe at the beginning of the Holocene because of the development of woodlands and loss of open habitats. Because of its preference for open habitats and in spite of its adaptability, the appearance or disappearance of the wild horse could therefore be a suitable palaeoecological indicator for the opening of the Holocene primeval woodlands. We revised the dating and reliability of the subfossil record and dated several bones by atomic mass spectrometry ¹⁴C dating. From the beginning of the Holocene (9600 cal a BC) to the end of the Atlantic Period (3750 cal a BC) there are 207 archaeological sites with wild horse records available in Europe. E. ferus survived the Pleistocene Holocene transition in Europe, but the spatiotemporal dynamics of populations fluctuated remarkably in the early and middle Holocene. Small and sparse populations increasingly became extinct during the early Holocene, until between 7100 and 5500 cal a BC the wild horse was almost absent in central parts of the European Lowlands. Particular conditions in natural open patches in the canopy forests, chalklands and floodplains may have maintained the local survival of the horse in some regions of the Lowlands, however. In the Late Atlantic, between 5500 and 3750 cal a BC the range of the wild horse was again extended. It re‐immigrated into central and western Europe, probably as a consequence of increasing landscape opening by Neolithic peoples. The data presented here may be a valuable part of the debate on the degree of openness of the early and middle Holocene landscape. Copyright © 2011 John Wiley & Sons, Ltd.     

Anisotropic mechanical properties of zircon and the effect of radiation damage

This study provides new insights into the relationship between radiation-dose-dependent structural damage due to natural U and Th impurities and the anisotropic mechanical properties (Poisson’s ratio, elastic modulus and hardness) of zircon. Natural zircon samples from Sri Lanka (see Muarakami et al. in Am Mineral 76:1510–1532, 1991) and synthetic samples, covering a dose range of zero up to 6.8 × 10¹⁸ α-decays/g, have been studied by nanoindentation. Measurements along the [100] crystallographic direction and calculations, based on elastic stiffness constants determined by Özkan (J Appl Phys 47:4772–4779, 1976), revealed a general radiation-induced decrease in stiffness (~54 %) and hardness (~48 %) and an increase in the Poisson’s ratio (~54 %) with increasing dose. Additional indentations on selected samples along the [001] allowed one to follow the amorphization process to the point that the mechanical properties are isotropic. This work shows that the radiation-dose-dependent changes of the mechanical properties of zircon can be directly correlated with the amorphous fraction as determined by previous investigations with local and global probes (Ríos et al. in J Phys Condens Matter 12:2401–2412, 2000a; Farnan and Salje in J Appl Phys 89:2084–2090, 2001; Zhang and Salje in J Phys Condens Matter 13:3057–3071, 2001). The excellent agreement, revealed by the different methods, indicates a large influence of structural and even local phenomena on the macroscopic mechanical properties. Therefore, this study indicates the importance of acquiring better knowledge about the mechanical long-term stability of radiation-damaged materials.     

Hydrographic Vertical Separation Surfaces (HyVSEPs) for the Tidal Waters of Canada

Since the advent of Global Navigation Satellite Systems, it has been possible to perform hydrographic survey reductions through the ellipsoid, which has the potential to simplify operations and improve bathymetric products. This technique requires a spatially continuous separation surface connecting chart datum (CD) to a geodetic ellipsoid. The Canadian Hydrographic Service (CHS), with support from the Canadian Geodetic Survey, has developed a new suite of such surfaces, termed Hydrographic Vertical Separations Surfaces, or HyVSEPs, for CD and seven tidal levels. They capture the spatial variability of the tidal datum and levels between tide gauges and offshore using semiempirical models coupling observations at tide stations with relative sea-level rise estimates, dynamic ocean model solutions, satellite altimetry, and a geoid model. HyVSEPs are available for all tidal waters of Canada, covering over seven million square kilometers of ocean and more than 200,000 kilometers of shoreline. This document provides an overview of the CHS's modeling approach, tools, methods, and procedures.

The HyVSEP for CD defines the new hydrographic datum for the tidal waters of Canada. HyVSEPs for other tidal levels are fundamental for coastal studies, climate change adaptation and the definition of the Canadian shoreline and offshore boundaries. HyVSEPs for inland waters are not discussed.     

Oil dispersal modelling: reanalysis of the Rena oil spill using open-source modelling tools

ABSTRACT

Oil spill forecast modelling is typically used immediately after a spill to predict oil dispersal and promote mobilisation of more effective response operations. The aim of this work was to map oil dispersal after the grounding of the MV Rena on Astrolabe Reef and to verify the results against observations. Model predictions were broadly consistent with observed distribution of oil contamination. However, some hot spots of oil accumulation, likely due to surf-zone and rip current circulation, were not well represented. Additionally, the model was run with 81 differing wind conditions to show that the events occurring during the grounding represented the typical likely behaviour of an oil spill on Astrolabe Reef. Oil dispersal was highly dependent on prevailing wind patterns; more accurate prediction would require better observations of local wind patterns. However, comparison of predictions with observations indicated that the GNOME model was an effective low-cost approach.     

Visualising 30 Years of Population Density Change in Australia’s Major Capital Cities

ABSTRACT

This study uses a novel spatial approach to compare population density change across cities and over time. It examines spatio-temporal change in Australia’s five most populated capital cities from 1981 to 2011, and documents the established and emerging patterns of population distribution. The settlement patterns of Australian cities have changed substantially in the last 30 years. From the doughnut cities of the 1980s, programs of consolidation, renewal and densification have changed and concentrated population in our cities. Australian cities in the 1980s were characterised by sparsely populated, low density centres with growth concentrated to the suburban fringes. ‘Smart Growth’ and the ‘New Urbanism’ movements in the 1990s advocated higher dwelling density living and the inner cities re-emerged, inner areas were redeveloped, and the population distribution shifted towards increased inner city population densities. Policies aimed at re-populating the inner city dominated and the resultant changes are now visible in Australia’s five most populated capital cities. While this pattern has been reported in a number of studies, questions remain regarding the extent of these changes and how to analyse and visualise them across urban space. This paper reports on a spatial method which addresses the limitations of changing statistical boundaries to identify the changing patterns in Australian cities over time and space.