Shear velocity estimates in rough‐bed open‐channel flow

Shear velocity u_* is an important parameter in geophysical flows, in particular with respect to sediment transport dynamics. In this study, we investigate the feasibility of applying five standard methods [the logarithmic mean velocity profile, the Reynolds stress profile, the turbulent kinetic energy (TKE) profile, the wall similarity and spectral methods] that were initially developed to estimate shear velocity in smooth bed flow to turbulent flow over a loose bed of coarse gravel (D₅₀ = 1·5 cm) under sub‐threshold conditions. The analysis is based on quasi‐instantaneous three‐dimensional (3D) full depth velocity profiles with high spatial and temporal resolution that were measured with an Acoustic Doppler Velocity Profiler (ADVP) in an open channel. The results of the analysis confirm the importance of detailed velocity profile measurements for the determination of shear velocity in rough‐bed flows. Results from all methods fall into a range of ± 20% variability and no systematic trend between methods was observed. Local and temporal variation in the loose bed roughness may contribute to the variability of the logarithmic profile method results. Estimates obtained from the TKE and Reynolds stress methods reasonably agree. Most results from the wall similarity method are within 10% of those obtained by the TKE and Reynolds stress methods. The spectral method was difficult to use since the spectral energy of the vertical velocity component strongly increased with distance from the bed in the inner layer. This made the choice of the reference level problematic. Mean shear stress for all experiments follows a quadratic relationship with the mean velocity in the flow. The wall similarity method appears to be a promising tool for estimating shear velocity under rough‐bed flow conditions and in field studies where other methods may be difficult to apply. This method allows for the determination of u_* from a single point measurement at one level in the intermediate range (0·3 < h < 0·6). Copyright © 2013 John Wiley & Sons, Ltd.     

Catalyzed Reactions on Mineral Plaster Materials Used for Indoor Air Purification

Zeolites have been used for a long time for purification and catalytical purposes. Recently, first products appeared on the market using zeolites also for improving the indoor air quality so far volatile organic compounds (VOC) are concerned. However, porous compounds like zeolites can be found also in plaster material. Therefore, it was manifest to evaluate the capability of plaster with regard to air cleaning. In this article, the contribution of plaster compounds toward adsorption and catalytical decomposition of VOCs is evaluated using α‐pinene, chlorobenzene, 2‐ethoxyethylacetate, and pentanal as target substances under standard conditions (23°C, 50% r.H.). These compounds were chosen because of their VOC typical physicochemical properties like molecular dimensions, density, boiling point, vapor pressure, and octanol–water distribution coefficient (logk_ow). Hydrated lime and metakaolin were found out to have good adsorption properties under these circumstances. Also natural zeolites showed good results especially on pentanal. By investigations in environmental chambers the reduction potential of test plasters on chlorobenzene and 2‐ethoxyethylacetate concentrations could be shown. Application of coatings had no or only temporary influence on the performance of the plaster. Additional tests in small chambers demonstrated the possibility to improve the properties of plasters with help of FAU‐ or MFI‐type zeolites but the experiments also showed that α‐pinene and pentanal undergo chemical reactions. Further effort should be made on investigations also toward other compounds, especially more volatile ones like formaldehyde. Also additional building materials like insulation material or boards should be taken into account.     

Uranium speciation and stability after reductive immobilization in aquifer sediments

It has generally been assumed that the bioreduction of hexavalent uranium in groundwater systems will result in the precipitation of immobile uraninite (UO₂). In order to explore the form and stability of uranium immobilized under these conditions, we introduced lactate (15 mM for 3 months) into flow-through columns containing sediments derived from a former uranium-processing site at Old Rifle, CO. This resulted in metal-reducing conditions as evidenced by concurrent uranium uptake and iron release. Despite initial augmentation with Shewanella oneidensis, bacteria belonging to the phylum Firmicutes dominated the biostimulated columns. The immobilization of uranium (∼1 mmol U per kg sediment) enabled analysis by X-ray absorption spectroscopy (XAS). Tetravalent uranium associated with these sediments did not have spectroscopic signatures representative of U-U shells or crystalline UO₂. Analysis by microfocused XAS revealed concentrated micrometer regions of solid U(IV) that had spectroscopic signatures consistent with bulk analyses and a poor proximal correlation (μm scale resolution) between U and Fe. A plausible explanation, supported by biogeochemical conditions and spectral interpretations, is uranium association with phosphoryl moieties found in biomass; hence implicating direct enzymatic uranium reduction. After the immobilization phase, two months of in situ exposure to oxic influent did not result in substantial uranium remobilization. Ex situ flow-through experiments demonstrated more rapid uranium mobilization than observed in column oxidation studies and indicated that sediment-associated U(IV) is more mobile than biogenic UO₂. This work suggests that in situ uranium bioimmobilization studies and subsurface modeling parameters should be expanded to account for non-uraninite U(IV) species associated with biomass.     

Radiometric Zircon Ages of a Tuff Sample from the Baishantou Member of Wuyun Formation,Jiayin: A Contribution to the Search for the K‐T Boundary in Heilongjian River Area,China

The existence of the Cretaceous-Tertiary (K/T) boundary in the non-marine succession is expected at Jiayin in the Heilongjiang River area, China. Zircons from a tuff sample from the Baishantou Member of Wuyun Formation in Jiayin were analyzed by the laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) U-Pb dating and fission-track dating methods. Ages of 64.1±0.7 Ma (U-Pb) and 61.7±1.8 Ma (fission-track dating) were obtained, which allow re-evaluation of a previously reported late Maastrichian age for the tuff layer that was in conflict with the paleontological evidence. These results confirm the Danian age of the section in agreement with the paleontological evidence.     

Risk-targeted seismic design maps for mainland France

In this article, the recently proposed approach known as ‘risk targeting’ for the development of national seismic design maps is investigated for mainland France. Risk targeting leads to ground-motion maps that, if used for design purposes, would lead to a uniform level of risk nationally. The Eurocode 8 design loads currently in force for France are used as the basis of this study. Because risk targeting requires various choices on, for example, the level of acceptable risk to be made a priori and these choices are not solely engineering decisions but involve input from decision makers we undertake sensitivity tests to study their influence. It is found that, in contrast to applications of this methodology for US cities, risk targeting does not lead to large modifications with respect to the national seismic hazard map nor to changes in the relative ranking of cities with respect to their design ground motions. This is because the hazard curves for French cities are almost parallel. In addition, we find that using a target annual collapse probability of about 10^?5 for seismically designed buildings and a probability of collapse when subjected to the design PGA of 10^?5 leads to reasonable results. This is again in contrast to US studies that have adopted much higher values for both these probabilities.     

Quantifying and relating land-surface and subsurface variability in permafrost environments using LiDAR and surface geophysical datasets

The value of remote sensing and surface geophysical data for characterizing the spatial variability and relationships between land-surface and subsurface properties was explored in an Alaska (USA) coastal plain ecosystem. At this site, a nested suite of measurements was collected within a region where the land surface was dominated by polygons, including: LiDAR data; ground-penetrating radar, electromagnetic, and electrical-resistance tomography data; active-layer depth, soil temperature, soil-moisture content, soil texture, soil carbon and nitrogen content; and pore-fluid cations. LiDAR data were used to extract geomorphic metrics, which potentially indicate drainage potential. Geophysical data were used to characterize active-layer depth, soil-moisture content, and permafrost variability. Cluster analysis of the LiDAR and geophysical attributes revealed the presence of three spatial zones, which had unique distributions of geomorphic, hydrological, thermal, and geochemical properties. The correspondence between the LiDAR-based geomorphic zonation and the geophysics-based active-layer and permafrost zonation highlights the significant linkage between these ecosystem compartments. This study suggests the potential of combining LiDAR and surface geophysical measurements for providing high-resolution information about land-surface and subsurface properties as well as their spatial variations and linkages, all of which are important for quantifying terrestrial-ecosystem evolution and feedbacks to climate.     

Elimination of Carbamazepine,Diclofenac and Naproxen from Treated Wastewater by Nanofiltration

Most conventional wastewater treatment plants remove very small amounts of micropollutants, such as pharmaceuticals. Here, the ability of two different types of submerged nanofiltration flat sheet modules to remove pharmaceuticals from wastewater is analyzed. The two nanofiltration membranes were used at relatively low pressures of only 0.3 and 0.7 bar. At such low pressures, the membranes did not retain salts to a great extent. This is advantageous in wastewater treatment because no salt concentrate is produced. Carbamazepine was retained only slightly by the nanofiltration membranes, whereas approximately 60% of diclofenac and naproxen were retained by both membranes. This level of effectiveness might not be enough to justify the use of such a system as an additional treatment step in wastewater treatment plants.     

Precipitation: A Parameter Changing Climate and Modified by Climate Change

This paper discusses two aspects of climate modeling, the deep water formation in the North Atlantic and precipitation changes due to climate change caused by anthropogenic emissions of greenhouse gases. The deep water formation is strongly influenced by the precipitation, and the precipitation is affected by the concentration of the greenhouse gases in the atmosphere and by the atmospheric and oceanic circulation. The experiments discussed here have been performed independently to test the stability of the thermohaline circulation of the North Atlantic and to investigate changes in precipitation due to anthropogenic greenhouse gas emissions. The precipitation changes in a climate change environment are sufficient in some simulations to decrease the thermohaline circulation noticeably. However, it appears that the amount of freshwater needed to bring the circulation to a collapse is magnitudes larger than the anticipated change in precipitation due to anthropogenic activities within the next 100 years. The precipitation changes, on the other hand, might change regionally quite drastically towards more extreme situations, thereby putting additional stress on vegetation and enhancing soil erosion.     

Paläogeographische Entwicklungen an mobilen Schollengrenzen im Westhindukusch (Bande Amir,Zentralafghanistan)

In the region of Bande Amir, located on the southern rim of the Tadschik basin, the Mesozoic section starts with detrital and conglomeratic limestones. These marine deposits of Upper Cretaceous age (Cenomanian-Turonian) disconformably cover a truncated complex of Upper Paleozoic rocks (Permian). After an interval of neritic sedimentation (Santonian, Campanian) the Upper Cretaceous sea (Maastrichtian) regressed from the Central Afghanian High. In the Hindukusch mountains the regression is related to crustal movements and regional uplifts, which hinged on the Herat lineament. Intermontane basins, developed on this mobile zone during mid-Tertiary time, gathered continental debris (Neogene conglomerates; Zohak-Formation) and led to the deposition of lacustrine sediments (Ghulghola-Formation). Orogenetic movements along the colliding edges of crustal blocks were rejuvenated in Plio-Pleistocene time, shifting the focus of deposition to the northwest. The basin was finally captured by the Amu Darja drainage system, leading to the development of canyon-like incisions. During warm periods of the Quaternary, fluviatile erosion in Bande Amir was interrupted at least four times by the retention of water behind large dams of travertine.