Air–Sea Interaction Features in the Baltic Sea and at a Pacific Trade-Wind Site: An Inter-comparison Study

A systematic comparison of wind profiles and momentum exchange at a trade wind site outside Oahu, Hawaii and corresponding data from the Baltic Sea is presented. The trade wind data are to a very high degree swell dominated, whereas the Baltic Sea data include a more varied assortment of wave conditions, ranging from a pure growing sea to swell. In the trade wind region swell waves travel predominantly in the wind direction, while in the Baltic, significant cross-wind swells are also present. Showing the drag coefficient as a function of the 10-m wind speed demonstrates striking differences for unstable conditions with swell for the wind-speed range 2 m s^?1 < U ₁₀ < 7 m s^?1, where the trade-wind site drag values are significantly larger than the corresponding Baltic Sea values. In striking contrast to this disagreement, other features studied are surprisingly similar between the two sites. Thus, exactly as found previously in Baltic Sea studies during unstable conditions and swell, the wind profile in light winds (3 m s^?1) shows a wind maximum at around 7–8 m above the water, with close to constant wind speed above. Also, for slightly higher wind speeds (4 m s^?1 < U ₁₀ < 7 m s^?1), the similarity between wind profiles is striking, with a strong wind-speed increase below a height of about 7–8 m followed by a layer of virtually constant wind speed above. A consequence of these wind-profile features is that Monin–Obukhov similarity is no longer valid. At the trade-wind site this was observed to be the case even for wind speeds as high as 10 m s^?1. The turbulence kinetic energy budget was evaluated for four cases of 8–16 30- min periods at the trade-wind site, giving results that agree very well with corresponding figures from the Baltic Sea.     

A Stochastic Object Model Conditioned to High-Quality Seismic Data

We present an approach for modeling facies bodies in which a highly constrained stochastic object model is used to integrate detailed seismic interpretation of the reservoir’s sedimentological architecture directly in a three-dimensional reservoir model. The approach fills the gap between the use of seismic data in a true deterministic sense, in which the facies body top and base are resolved and mapped directly, and stochastic methods in which the relationship between seismic attributes and facies is defined by conditional probabilities. The lateral geometry of the facies bodies is controlled by seismic interpretations on horizon slices or by direct body extraction, whereas facies body thickness and cross-sectional shape are defined by a mixture of seismic data, well data, and user defined object shapes. The stochastic terms in the model are used to incorporate local geometric variability, which is used to increase the geological realism of the facies bodies and allow for correct, flexible well conditioning. The result is a set of three-dimensional facies bodies that are constrained to the seismic interpretations and well data. Each body is defined as a parametric object that includes information such as location of the body axis, depositional direction, axis-to-margin normals, and external body geometry. The parametric information is useful for defining geologically realistic intrabody petrophysical trends and for controlling connectivity between stacked facies bodies.     

Armorican provenance for the mélange deposits below the Lizard ophiolite (Cornwall,UK): evidence for Devonian obduction of Cadomian and Lower Palaeozoic crust onto the southern margin of Avalonia

Devonian sedimentary rocks of the Meneage Formation within the footwall of the Lizard ophiolite complex in SW England are thought to have been derived from erosion of the over-riding Armorican microplate during collision with Avalonia and the closure of the Rheic Ocean. We further test this hypothesis by comparison of their detrital zircon suites with those of autochthonous Armorican strata. Five samples analysed from SW England (Avalonia) and NW France (Armorica) have a bimodal U–Pb zircon age distribution dominated by late Neoproterozoic to middle Cambrian (c. 710–518 Ma) and Palaeoproterozoic (c. 1,800–2,200 Ma) groupings. Both can be linked with lithologies exposed within the Cadomian belt as well as the West African craton, which is characterized by major tectonothermal events at 2.0–2.4 Ga. The detrital zircon signature of Avalonia is distinct from that of Armorica in that there is a much larger proportion of Mesoproterozoic detritus. The common provenance of the samples is therefore consistent with: (a) derivation of the Meneage Formation mélange deposits from the Armorican plate during Rheic Ocean closure and obduction of the Lizard Complex and (b) previous correlation of quartzite blocks within the Meneage Formation with the Ordovician Grès Armoricain Formation of NW France.     

Zircon provenance of Quaternary cover beds using U–Pb dating: Regional differences in the Southwestern USA

U–Pb dating of detrital zircons (DZ) in Quaternary slope deposits (cover beds) and examination of the surface structure of single zircon grains may enable reconstruction of the provenance of their aeolian components and help to reconstruct sedimentary palaeo-transportation cascades. We distinguish several layers of slope deposits (cover beds) using a palaeosol-supported sequence-stratigraphic approach. In a pilot study, we demonstrate the usability of using end-member-modelled analyses of grain sizes to identify the aeolian matter, multi-dimensional scaling and density functions (probability density functions (PDF) and Kernel density estimations (KDE)) of the U–Pb data, and the grain morphology of DZ, and show that the age and appearance variation of DZ in the Great Basin differ remarkably from those of the Colorado Plateau. All samples contain aeolian matter. Density functions of the DZ ages show similarities within each of the two regions. The Great Basin samples are dominated by late Cretaceous and Paleogene zircons, which are assumed to derive from volcanism. In contrast, the Colorado Plateau samples are almost free of these contributions. Presumably, the difference is due to palaeolakes, which were frequent in the Great Basin only, whose sediments contain a similar spectrum of DZ ages. Zircon morphology indicates that most grains have a history of aeolian transportation, whereas the grains assumed to be of volcanic origin often do not show similar transportation marks; this indicates that their transportation was dominated by the eruptive process but fewer steps of a transportation cascade. Multidimensional scaling of age data defines clusters of samples with similar DZ ages and – compared with published ages from possible sources – allows first interpretations of provenance. Quaternary aeolian sediments have not been studied in, and the applied mix of methods has not been applied to, the southwestern USA before. We demonstrate their feasibility for this study area.     

Metal dispersion in groundwater in an area with natural and processed black shale – Nationwide perspective and comparison with acid sulfate soils

Black shale is often rich in sulfides and trace elements, and is thus a potential environmental threat in a manner similar to acid sulfate soils and active or abandoned sulfide mines. This study aims at characterising how exposed and processed (mined and burnt) black shale (alum shale) in Degerhamn, SE Sweden, affects the chemistry (Al, As, Ba, Cd, Ca, Cr, Co, Cu, Fe, Pb, Mg, Mn, Mo, Ni, K, Si, Na, Sr, S, U, V and Zn) of the groundwater. There were large variations in groundwater chemistry between nearby sampling points, while the temporal variations generally were small. Acidic groundwater (around pH 4), found in deposits of burnt and carbonate-poor shale where the conditions for sulfide oxidation were favourable, was strongly elevated in Al, U and several chalcophilic metals (Cd, Co, Cu, Ni and Zn). Cadmium and U were also, together with Mo, abundant in many of the near-neutral waters, both in the non-mined black shale bedrock and in the deposits of burnt shale. An extrapolation to a national level suggests that the dispersion of Ni from naturally occurring black shale is similar to that from anthropogenic point sources, while for Cd and As it is assessed to be approximately one tenth of that from point sources. The processed shale was, however, a much larger source of metals than the black shale bedrock itself, showing this material’s potential as a massive supplier of metals to the aquatic environment. A comparison of waters in contact with the processed Cambrian–Ordovician black shale in Degerhamn and acid sulfate soils of the region shows that these two sulfide-bearing materials, in many respects very different, delivers basically the same suite of trace elements to the aquatic environment. This has implications for environmental planning and protection in areas where these types of materials exist.     

Regional desertification: A global synthesis

The paper presents results on the use of NOAA AVHRR data for desertification monitoring on a regional–global level. It is based on processing of the GIMMS 8 km global NDVI data set. Time series of annually integrated and standardized annual NDVI anomalies were generated and compared with a corresponding rainfall data set (1981–2003).The regions studied include the Mediterranean basin, the Sahel from the Atlantic to the Red Sea, major parts of the drylands of Southern Africa, China–Mongolia and the drylands of South America, i.e. important parts of the desertification prone drylands of the world.It is concluded that the suggested methodology is a robust and reliable way to assess and monitor vegetation trends and related desertification on a regional–global scale. A strong general relationship between NDVI and rainfall over time is demonstrated for considerable parts of the drylands. The results of performed trend analysis cannot be used to verify any systematic generic land degradation/desertification trend at the regional–global level. On the contrary, a “greening-up” seems to be evident over large regions.     

The zircon evidence of temporally changing sediment transport—the NW Gondwana margin during Cambrian to Devonian time (Aoucert and Smara areas,Moroccan Sahara)

International Journal of Earth Sciences - Detrital zircon provenance studies are an established tool to develop palaeogeographic models, mostly based on zircon of siliciclastic rocks and isotope...     

Hydrogeochemical Processes in the Kafue River upstream from the Copperbelt Mining Area, Zambia

Frequent sampling during an annual cycle of dissolved(<0.45 m) and suspended (>0.45 m) elementshas been conducted in the Kafue River at Raglan'sFarm, upstream from the mining activities within theCopperbelt Province, Zambia. Additional sampling ofsediment and interstitial pore water was conductedduring low water discharge. The presence of carbonateswithin the drainage basin naturally gives rise to highelement concentrations in the dissolved phase(Ca = 626, Mg = 494, Na = 360 and K = 24 mmol l^-1).During the rainy season the relative composition ofthe dissolved elements indicated a wash out ofaccumulated weathering products and mineralisedorganic material from the unsaturated zone of the soilprofile. High concentrations of dissolved Al, Fe andMn were measured during high water discharge. At lowwater discharge the sediment was a major source of Fe,Mn and associated Co and Cu to the water column.Enhanced concentrations of dissolved and suspended S,Co and Cu during the rainy season indicated thatatmospheric deposited particles from the mining areawere washed out into the river. Autochthonousformation of particles rich in Si indicated diatomproduction during low water discharge.