On the design and selection of polychlorinated biphenyls for use in biological test systems

The polychlorinated biphenyls (PCBs) consist of a large number of individual congeners with varying degree of chlorination and possible substitution patterns. No single congener can be used as a representative congener for the whole class of compounds. Multivariate chemical characterisation (principal component analysis) in combination with factorial design provide tools by which small sets of structurally representative congeners can be determined. These tools are suggested to be used in the design of biological experiments in order to introduce systematic structural variation in the congeners to be tested and to make it possible to construct quantitative structure-activity relationships (QSARs). A QSAR based on bioaccumulation factors (BAFs) in fish for 20 systematically selected PCBs made it possible to predict BAFs for all 134 non-tested tetra-through hepta-chlorinated congeners. The use of these systematic and balanced sets of congeners in the experimental protocol will provide increased knowledge of the environmental behaviour of the PCBs.     

Methane gas Seeps Along the Oxic/Anoxic Gradient in the Black Sea: Manifestations, Biogenic Sediment Compounds and Preliminary Results on Benthic Ecology

Abstract. Sediment parameters (grain size, organic content, chloroplastic pigments, Adenylates, Potential hydrolytic activity and electron transport system activity) and benthic biota were studied in methane seep area south-west of the Crimean Peninsula in the Black Sea over a depth range from 60 to 260m. A control transect with similar depths was performed in an adjacent nonseep area. Methane seepage in this region occurs from 35 to ˜ 85m depth, passing the oxic anoxic interface zone at 130 to 180m. The methane seep areas were characterized by abundant carbonate precipitates which occurred in various shapes from small, flat structures to tall chimneys with increasing anoxia. The carbonates were associated with distinct bacterial mats. Most of the measured biochemical parameters in the sediment were quite similar in the seep and nonseep areas. The content of organic matter was higher and grain size was more uniform in the nonseep areas. However, the seep areas were charaterized by highter proportions of the larger fauna (size classes 0.5–1 mm and ≥ 1mm) as well as increased total numbers of benthic fauna in the suboxic and upper anoxic zone. The animals did not show any seep-specific adaptations. In addition to methane seepage, highly variable hydrochemical and sedimentary conditions on the lower shelf and upper slope may also play an important role in structuring the composition and distribution of the benthic fauna.     

Abiotic synthesis of organic compounds under the conditions of submarine hydrothermal systems: a perspective

Deep-sea hydrothermal systems have been proposed to be likely environments for chemical evolution and the origin of life on Earth. Recently, experiments have, therefore, been carried out in order to test the hypothesis that amino acids can be synthesized under conditions representing hydrothermally altered oceanic crust. The variety of amino acids that have been detected in such experiments corresponds roughly to that reported previously for electric sparking in reducing gas mixtures. The relative yields of the protein amino acids detected are significantly higher than in electric spark discharge experiments, and the overall yields are about an order of magnitude higher. The amino acids are all racemic.     

Precipitation and evaporation budgets over the Baltic Proper: observations and modelling

Precipitation and evaporation budgets over the Baltic Sea were studied in a concerted project called PEP in BALTEX (Pilot study of Evaporation and Precipitation in the Baltic Sea), combining extensive field measurements and modelling efforts. Eddy-correlation-measurements of turbulent heat flux were made on a semi-continuous basis for a 12 month period at four well-exposed coastal sites in the Baltic Proper (the main basin of the Baltic Sea). Precipitation was measured at land-based sites with standard gauges and on four merchant ships travelling between Germany and Finland with the aid of specially designed ship rain gauges (SRGs). The evaporation and precipitation regime of the Baltic Sea was modelled for a 12 month period by applying a wide range of numerical models: the operational atmospheric High Resolution Limited Area Model (HIRLAM, Swedish and Finnish versions), the German atmospheric REgional-scale MOdel, REMO, the operational German Europe Model (only precipitation), the oceanographic model PROBE-Baltic, and two models that use interpolation of ground-based data, the Swedish MESAN model of SMHI and a German model of IFM-GEOMAR Kiel. Modelled precipitation was compared with SRG measurements on board the ships. A reasonable correlation was obtained, but the regional-scale models and MESAN gave some 20% higher precipitation over the sea than is measured. Bulk parameterisation schemes for evaporation were evaluated against measurements. A constant value of C_HN and C_EN with wind speed, underestimated large fluxes of both sensible and latent heat flux. The limited area models do not resolve the influence of the height of the marine boundary layer in coastal zones and the entrainment (on the surface fluxes), which may explain the observed low correlations between modelled and measured latent heat fluxes. Estimates of evaporation, E, and precipitation, P, for the entire Baltic Proper were made with several models for a 12 month period. While the annual variation was well represented by all predictions, there are still important differences in the annual means. Evaporation ranges from 509 to 625 mm year^-1 and precipitation between 624 and 805 mm year^-1 for this particular 12 month period. Taking the results of model verification from the present study into account, the best estimate of P-E is about 100 ± 50 mm for this particular 12 month period. But the annual mean of P-E varies considerably from year to year. This is reflected in simulations with the PROBE-Baltic model for an 18 year period, which gave 95 mm year^-1 for the 12 month period studied here and 32 mm year^-1 as an average for 18 years.     

Theory And Measurements For Turbulence Spectra And Variances In The Atmospheric Neutral Surface Layer

Predictions from a new theory for high Reynolds number turbulent boundary layers during near-neutral conditions are shown to agree well with measurements of atmospheric surface-layer variances and spectra. The theory suggests surface-layer turbulence is determined by detached eddies that largely originate in the shearing motion immediately above the surface layer; as they descend into this layer, they are strongly distorted by the local shear and impinge onto the surface. Because the origin of these eddies is non-local, they are similar to those described in previous studies as `inactive' turbulence. However, they are, in fact, dynamically highly active, supplying the major mechanism for the momentum transport, including upward bursting on the time scale of the larger eddies. The vertical velocity results show that the variance and the low frequency parts of spectra increase with height in the surface layer, while in the self similar (k₁ ^-1) range the streamwise low frequency components are approximately constant with height. These large-scale longitudinal eddies extend to a length _s, which is equal to the boundary-layer height near the surface andincreases linearly to a maximum of about three times the boundary-layer height at roughly 15 m and decreases in the upper parts of the surface layer. This lower part of the surface layer, the eddy surface layer, is the region in which the eddies impinging from layers above are strongly distorted. This new result for the atmospheric boundary layer has practical application for calculating fluctuating wind loads on structures and lateral dispersion of pollution from local sources.     

A flow-foliated ignimbrite related to the Åland rapakivi granite in SW Finland

A flow-foliated felsic ignimbrite constitutes the uppermost lithological unit of the 1.58 Gyr anorogenic magmatic rocks in SW Finland. The ignimbrite is derived from an explosive eruption of hot (≅ 950 °C) phenocryst-bearing A-type (rapakivi-type granite magma.
The ignimbrite is close in composition to subvolcanic rapakivi granites that occur in the margins of the kand rapakivi batholith. The subvolcanic granites crystallized under a pressure of ≅ 1 kbar and at temperatures of about 650–700 °C. However, both major and rare earth elements show that the ignimbrite- forming magma was more fractionated than the magma forming the subvolcanic varieties.
Supported by evidence of mafic-felsic magma mingling, it is suggested that injection of hot mafic magma into a shallow magma chamber produced the high temperature of the ignimbrite-forming magma. This injection increased the magmatic and the volatile pressure that caused the eruption of the dry felsic magma.     

Constraining a SHRIMP U-Pb age: micro-scale characterization of zircons from Saxonian Rotliegend rhyolites

We present results of a detailed investigation of zircons from two rhyolites from St. Egidien and Chemnitz, Saxony, using a combination of microprobe techniques (SHRIMP ion probe, Raman microprobe, SEM: SE, BSE, and CL imaging). These rhyolites belong to the so-called “lower volcanics”, which is the older of two series of Late Variscan volcanic rocks occurring in the Saxonian Sub-Erzgebirge basin (Germany). The purpose of the present contribution is to demonstrate that detailed characterization of zircons, as provided by the different micro-techniques, facilitates soundest interpretation of geochronological data. The zircons (at most 40 to 80 m in size) show oscillatory growth zoning, with reversely correlated CL and BSE signal intensities. These zircons are interpreted to have grown during crystallization of the rhyolite because, apart from some cracking, they do not appear to have experienced any alteration since the time of their growth: The shapes of the zircons and their internal structures revealed by CL and BSE imaging appear to be magmatic, and neither annealing of the accumulated alpha-decay damage nor disturbance of the U-Pb system is observed. The SHRIMP ion probe measurements on the zircons gave a Permian ²⁰⁶Pb/²³⁸U age of 278 ± 5 Ma (95% confidence). The concordance of this age is supported by the correlation between the low degrees of metamictization (estimated from Raman parameters) and the accumulated alpha fluxes (calculated from SHRIMP data). The 278 Ma zircon age is interpreted to represent the age of the “lower rhyolites” series and, with that, the age of postkinematic Late Variscan volcanism in the Sub-Erzgebirge basin, which has been related to anorogenic extension and uplift as a result of intracontinental rifting. Because of genetic association of rhyolites in the Sub-Erzgebirge basin and Li-F granites and lamprophyres in the neighbouring Erzgebirge, the rhyolite age also indirectly contributes to the understanding of the geological history of the Erzgebirge. The 278 Ma age is the first absolute dating result for rhyolites from the Saxonian Sub-Erzgebirge basin. Received: 16 December 1997 / Accepted: 4 May 1998     

The Influence of O3, Relative Humidity, NO and NO2 on the Oxidation of α-Pinene and Δ3-Carene

Upto 13% of -pinene and ³-carene had reacted after 213 s in this dark experimental set-up, where O₃, NO and NO₂ were mixed with terpenes at different relative humidities (RHs). The different experiments were planned according to an experimental design, where O₃, NO₂, NO, RH and reaction time were varied between high and low settings (25 and 75 ppb, 15 and 42%, 44 and 213 s). An increased amount of -pinene and ³-carene reacted in the chamber was observed, when the level of O₃, NO and reaction time was increased and RH was decreased. In the study, it was found that different interactions affected the amount of terpene reacted as well. These interactions were between O₃ and NO, O₃ and reaction time, NO and RH, and between NO and reaction time.