Sensitivity analysis of CDOM spectral slope in artificial and natural samples: an application in the central eastern Mediterranean Basin

In the past two decades, optical properties of chromophoric dissolved organic matter (CDOM) in marine environments have been extensively studied. Many of these studies report CDOM properties for the offshore environment where this complex mixture of optically active compounds is strongly diluted. Nevertheless, autochthonous and allochthonous sources have been identified and sinks related to photodegradation and bacterial activity have been demonstrated. The calculation of the spectral slope of the CDOM absorption curve has been proven to be useful and is often reported. However, a rigorous uncertainty analysis of the slope calculation is rarely reported. In this paper, we propose a method to evaluate the uncertainty of CDOM spectral slope calculated between 270 and 400 nm, using both naturally sampled and artificial solutions. We use these results to study the ultra-oligotrophic waters of the Mediterranean Sea (central eastern basin), where little is known about CDOM spatial distribution. We show that dilutions of both artificial and natural samples produce a Gaussian distribution of spectral slopes, indicating that consistent values may be determined, with a typical uncertainty of ±0.0004 nm⁻¹ when absorption at 300 nm was greater then 0.1 m⁻¹ (0.1 m pathlength). Comparing the distribution of spectral slopes from central eastern basin samples to a Gaussian distribution, we show differences between measurements that were significantly different. These values allow us to distinguish possible sources (algal derived CDOM), sinks (e.g. photo-bleaching) at different depths. We propose a subdivision of CDOM compounds into refractory and semilabile/refractory pools and evaluate the CDOM spectral slope of algal derived CDOM released at or near deep chlorophyll maximum.     

Space/time tectono-sedimentary evolution of the Umbria-Romagna-Marche Miocene Basin (Northern Apennines, Italy): a foredeep model

The space/time evolution of the Umbria-Romagna-Marche domains of the northern Apennine Miocene foredeep is proposed. In this period, the turbidite siliciclastic sedimentation is represented mainly by the Miocene Marnoso-Arenacea Formation, which generally ends with mainly marly deposits. From the internal Apennine sectors (Umbria-Romagna domain) to the external Adriatic Margin (Marche domain) the siliciclastic succession overlies hemipelagic marly deposits (Schlier Formation). The whole depositional area can be considered as a single wide basin with depocenter or main sedimentation areas progressively migrating eastwards. This basin is characterized by some morphological highs which did not constitute real dams for the sedimentary flows (turbidity currents). Multiple feeding (arkose, litharenites, calcarenites) from different sources is related to palaeogeographical and palaeotectonic reorganization of the most internal, previously deformed, Apennine areas. The activation of the foredeep stage is marked by the beginning of the siliciclastic sedimentation (Late Burdigalian in the most internal sector). This sedimentation ends in the most external sector in the Early Messinian, pointing to a depositional cycle of about 9?C10?Ma. The diachronism of the base of the siliciclastic deposition proves to be almost 5?Ma. The syn-depositional compressional deformation, which shows a marked diachronism, affected the internal area of the foredeep in the Early-Middle Serravallian, and progressively migrated up to Late Miocene, involving more and more external sectors. The deformed siliciclastic sedimentary wedge constitutes an orogenic pile incorporated in the Apennine Chain, represented by different tectonic elements superimposed by means of NE-vergent thrusts. The main stratigraphic and tectonic events of the Toscana-Romagna-Marche Apennines are presented in a general framework, resulting also in a terminological revision.     

Degradation and Detoxification of Chlorophenols in Continuous‐Flow Fixed‐Bed Aerobic Reactors

An indigenous bacterial strain of Delftia sp. capable of degrading 2,4‐dicholorophenol and an indigenous bacterial community that degrades 2,4,6‐trichlorophenol (TCP) were employed to inoculate continuous down‐flow fixed‐bed reactors. Continuous‐reactors were constructed from PVC employing hollow PVC cylinders as support material. Synthetic wastewater was prepared by dissolving the corresponding chlorophenol in non‐sterile groundwater. Biodegradation was evaluated by spectrophotometry, chloride release, GC, and microbial growth. Detoxification was evaluated by using Daphnia magna as test organism. Delftia sp. was able to remove an average of 95.6% of DCP. Efficiency in terms of chemical oxygen demand (COD) was of 88.9%. The indigenous bacterial community that degrades TCP reached an average efficiency of 96.5 and 91.6% in terms of compound and COD removal, respectively. In both cases stoichiometric removal of chloride and detoxification was achieved. When synthetic wastewater feed was cut off for 7 days, both reactors showed a fast recovery after inflow restarting, reaching average outlet concentration values within 36 h. The promising behavior of the microorganisms and the low cost of the reactors tested allow us to suggest their possible application to remediation processes.     

Recovery of the macrozoobenthic community after severe dystrophic crises in a Mediterranean coastal Lagoon (Orbetello, Italy)

The Orbetello lagoon, one of the largest Western Mediterranean lagoons, was affected by high algal blooms and severe anoxic crises in 1992 and 1993, with fish mortality throughout most of the lagoon and a drastic reduction of benthic species. Many measures were undertaken between 1994 and 1996 to remove the severe eutrophication of this lagoon. Such measures included harvesting of the floating seaweed biomass, removal of all wastewater and sea channel enlargement by dredging activity. The aim of the present research was to study the macrozoobenthic assemblage in 1999 and to compare it with previous research in order to assess the recovery of the lagoon. A total of 106 taxa and 45,175 individuals were collected in three areas (sea inlets, western and eastern lagoon) having different organic matter loading during winter and summer. The results of multivariate and correlation analyses indicated that trophic status and its seasonal dynamics were crucial in determining species distribution among the different areas. Moreover, comparison of the macrozoobenthic structure between winter 1995 and 1999 showed differences in species composition and structural parameters in the western and eastern lagoon, where a clear recovery of benthic assemblages was observed in 1999. However, the dominance of opportunistic species in most of the lagoon and the decrease in some structural parameters during summer suggested that this basin still presented signs of disturbance in 1999, six years after the last extended anoxic crises and even after completion of the restoration measures carried out in the environment. It was hypothesized that a secondary disturbance, sustained by a high seasonal release of nutrients from the sediments, could create considerable deviations from the expected improvement in benthic conditions.     

The SWAP EUV Imaging Telescope Part I: Instrument Overview and Pre-Flight Testing

The Sun Watcher with Active Pixels and Image Processing (SWAP) is an EUV solar telescope onboard ESA’s Project for Onboard Autonomy 2 (PROBA2) mission launched on 2 November 2009. SWAP has a spectral bandpass centered on 17.4 nm and provides images of the low solar corona over a 54×54 arcmin field-of-view with 3.2 arcsec pixels and an imaging cadence of about two minutes. SWAP is designed to monitor all space-weather-relevant events and features in the low solar corona. Given the limited resources of the PROBA2 microsatellite, the SWAP telescope is designed with various innovative technologies, including an off-axis optical design and a CMOS–APS detector. This article provides reference documentation for users of the SWAP image data.     

Comparing efficacy of different taxonomic resolutions and surrogates in detecting changes in soft bottom assemblages due to coastal defence structures

Sandy shores on the West coast of the North Adriatic Sea are extensively protected by different types of defence structures to prevent coastal erosion. Coastal defence schemes modify the hydrodynamic regime, the sediment structure and composition thus affecting the benthic assemblages. This study examines the effectiveness in detecting changes in soft bottom assemblages caused by coastal defence structures by using different levels of taxonomic resolution, polychaetes and/or bivalves as surrogates and different data transformations. A synoptic analyses of three datasets of subtidal benthic macrofauna used in studies aimed at assessing the impact of breakwaters along the North Adriatic coast has been done. Analyses of similarities and correlations between distance matrices were done using matrices with different levels of taxonomic resolution, and with polychaetes or bivalves data alone. Lentidium mediterraneum was the most abundant species in all datasets. Its abundance was not consistently related to the presence of defence structures. Moreover, distribution patterns of L. mediterraneum were masking the structure of the whole macrofaunal assemblages. Removal of L. mediterraneum from the datasets allowed the detection of changes in benthic assemblages due to coastal defences. Analyses on different levels of taxonomic resolution showed that the level of family maintained sufficient information to detect the impacts of coastal defence structures on benthic assemblages. Moreover, the outcomes depended on the transformation used. Patterns of distribution of bivalves, used as surrogates, showed low correlations with the patterns of the total macrofaunal species assemblages. Patterns of polychaetes, if identified to the species or genus level showed higher correlations with the whole dataset. However, the identification of polychaetes to species and genus level is as costly as the identification of all macrobenthic taxa at family level.This study provided additional evidences that taxonomic sufficiency is a useful tool in environmental monitoring, also in investigations on the impacts of coastal defence structures on subtidal macrofauna. The use of coarser taxonomic level, being time-efficient, would allow improving sampling designs of monitoring programs by increasing replication in space and time and by allowing long term monitoring studies.     

In situ heavy metals (copper, lead and cadmium) in different plankton compartments and suspended particulate matter in two coupled Mediterranean coastal ecosystems (Toulon Bay, France)

We monitored the concentrations of copper, lead and cadmium in seawater, in suspended particulate matter (SPM) and in bacteria, phyto- and zooplankton communities separated from abiogenic particles, over a one year cycle in two coupled Mediterranean coastal ecosystems (Little Bay (LiB) and Large Bay (LaB)). Metals were present in seawater in the order Cu > Pb > Cd in both bays and showed important variations within the same month than among months. In LiB, their concentrations were between 0.62 and 2.82 μg Cu l⁻¹, 0.16 and 19 μg Pb l⁻¹ and 0.007 and 0.14 μg Cd l⁻¹, respectively, whereas in LaB, they were between 0.23 and 2.11 μg Cu l⁻¹, 0.09 and 0.76 μg Pb l⁻¹ and not detected and 0.65 μg Cd l⁻¹. SPM play an important role on metal adsorption, especially for copper. Bioaccumulation factors showed that bacteria and phytoplankton accumulate metals whereas zooplankton tends to biodiminish them in the plankton food web.     

Sliding-uplifting response of rigid blocks to base excitation

In the present paper a two-degree-of-freedom system is considered which allows the simulation of rigid blocks uplifting and sliding on frictional foundations; the monolateral constraint between block and base is schematized by means of a joint model, which allows the contact problem to be discretized. The joint model is governed by normal and shear constitutive laws, which have been derived by the phenomenological behaviour of stone blocks and rock joints, as given by rock mechanics. Furthermore, a numerical procedure has been developed in order to solve the non-linear equations governing the motion of the block-base system, and to analyse the dynamic response of this system under seismic excitation; particular attention has been paid to the influence of the vertical displacement on the slip response.