土屋-延东斑岩型铜(钼)矿床多源信息找矿模型

为提高东天山铜镍成矿带内的矿产勘查效益，文章综合了区域成矿环境、矿床特征、地球物理场、地球化学场等成矿信息，尝试建立了土屋—延东斑岩型铜钼矿床的多源信息找矿模型。认为成矿带内铜矿资源远景良好，必将成为我国又一个铜矿资源潜力区。     

Wetlands of Northeast Asia and High Asia: an overview

This review reports background information on wetlands in the Northeast Asia and High Asia areas, including wetland coverage and type, significance for local populations, and threats to their vitality and protection, with particular focus on the relationship of how global change influenced wetlands. Natural wetlands in these areas have been greatly depleted and degraded, largely due to global climate change, drainage and conversion to agriculture and silviculture, hydrologic alterations, exotics invasions, and misguided management policies. Global warming has caused wetland and ice-sheet loss in High Asia and permafrost thawing in tundra wetlands in Northeast Asia, and hence induced enormous reductions in water-storage sources in High Asia and carbon loss in Northeast Asia. This, in the long term, will exacerbate chronic water shortage and positively feed back global warming. Recently, better understanding of the vital role of healthy wetland ecosystems to Asia’s sustainable economic development has led to major efforts in wetland conservation and restoration. Nonetheless, collaborative efforts to restore and protect the wetlands must involve not only the countries of Northeast and High Asia but also international agencies. Research has been productive but the results should be more effectively integrated with policy-making and wetland restoration practices under future climatic scenarios.     

青藏高原东北缘寺口子盆地新生代沉积演化及其构造意义

宁夏固原寺口子盆地发育巨厚的新生代地层,这些地层记录了青藏高原东北部的沉积演化特征和构造演变历史。根据剖面沉积物粒度特征、沉积结构和构造、沉积层序,识别出20种岩相、5种沉积相类型。结合前人对寺口子剖面的古地磁测年,分析研究盆地的沉积演化特征以及对构造的响应表明:20.1 Ma盆地以缓慢的坳陷沉降开始演化,直至1.2 Ma遭受破坏。在此期间青藏高原东北部经历了6.4 Ma、4.6 Ma和1.2 Ma这3次明显的构造挤压隆升运动,其中约6.4 Ma的构造运动是青藏高原向东北部扩展首次影响到海原—六盘山断裂以东地区。从盆地的形成和沉积演化过程来看,马东山山前断裂的逆冲推覆,导致了寺口子盆地的强烈变形和构造降升,并且最终成为青藏高原的最新组成部分。     

Quantitatively distinguishing sediments from the Yangtze River and the Yellow River using δ Eu<Subscript>N</Subscript>-ΣREEs plot

Sediment samples were collected from the lower channel of the Yangtze River and the Yellow River and the contents of rare earth elements (REEs) were measured. In addition, some historical REEs data were collected from published literatures. Based on the δ Eu_N-ΣREEs plot, a clear boundary was found between the sediments from the two rivers. The boundary can be described as an orthogonal polynomial equation by ordinary linear regression with sediments from the Yangtze River located above the curve and sediments from the Yellow River located below the curve. To validate this method, the REEs contents of sediments collected from the estuaries of the Yangtze River and the Yellow River were measured. In addition, the REEs data of sediment Core 255 from the Yangtze River and Core YA01 from the Yellow River were collected. Results show that the samples from the Yangtze River estuary and Core 255 almost are above the curve and most samples from the Yellow River estuary and Core YA01 are below the curve in the δEu_N-ΣREEs plot. The plot and the regression equation can be used to distinguish sediments from the Yangtze River and the Yellow River intuitively and quantitatively, and to trace the sediment provenance of the eastern seas of China. The difference between the sediments from two rivers in the δEu_N-ΣREEs plot is caused by different mineral compositions and regional climate patterns of the source areas. The relationship between δEu_N and ΣREEs is changed little during the transport from the source area to the river, and from river to the sea. Thus the original information on mineral compositions and climate of the source area was preserved. Supported by National Natural Science Foundation of China (Grant Nos. 40506016, 40576032, and 90411014)     

广西近海灾害地质因素及声学反射特征

利用高分辨率地球物理资料及相关历史资料,对北部湾北部的广西近海灾害地质因素进行了地质地球物理解译,识别出海底沙波、海底沙脊、塌陷洼地、冲刷沟槽、浅层气、残积砂体、地层间断、埋藏丘、埋藏古河道等多种灾害地质因素.根据它们出现的频率、规模及声学特征可知:浅层气和埋藏古河道是广西近海最为发育的灾害地质因素,其对海洋工程的施工与建设有较大的危害性.     

阶段性干旱胁迫对小麦光合生理特性及产量结构的影响

在人工遮雨的条件下,采用盆栽的种植方式探究"皖麦68"营养生长期(返青期—开花期)及生殖生长期(开花期—成熟期)轻度干旱胁迫(土壤相对含水量为55%±5%)及复水(土壤相对含水量为70%±5%)对其光合生理特性及产量结构的影响。结果表明:返青期至成熟期充分供水(CK)的小麦旗叶光合参数和产量最高。开花至成熟期复水(DN)的小麦叶片在复水后光合能力迅速恢复,表现出了超补偿效应:光合速率(16.43μmol/(m~2·s))甚至超过了CK(15.01μmol/(m~2·s));采用非直角双曲线模型拟合小麦旗叶的光响应曲线,其中DN的曲角θ最大;DN产量较CK略有降低但千粒重为34.51 g,高于CK(34.44 g)。开花至成熟期轻度干旱(ND)及全生育期轻度干旱(DD)的小麦光合特征参数与产量均显著降低。DD产量最低、品质最差,但其收获指数I_H高于CK、仅次于DN。在小麦返青期—开花期进行水分管理适量减少灌溉,开花期—成熟期复水能够提升籽粒的干物质积累量,获得较高的产量及品质。     

内蒙古中西部宝音图群云母片岩的变质P-T轨迹与锆石年代学研究

位于内蒙古中西部地区的宝音图群,主要由云母片岩、斜长角闪岩、石英岩和大理岩等组成。其中云母片岩中发育典型的巴罗式递增变质带,目前对于该递增变质带的研究非常薄弱。本文对宝音图群的云母片岩开展了系统的岩相学、矿物化学、相平衡模拟以及锆石U-Pb年代学的研究。岩相学研究结果显示,三个云母片岩样品具有不同的峰期矿物组合,分别为石榴子石+白云母+黑云母+斜长石+石英,十字石+白云母+黑云母+斜长石+钛铁矿+石英,石榴子石+蓝晶石+白云母+黑云母+斜长石+钛铁矿+石英。此外,样品LS93和LS07存在晚期红柱石的叠加。相平衡模拟研究限定三个云母片岩的峰期温度压力分别为：577℃、0.73 GPa, 620℃、0.78 GPa和670℃、0.8 GPa,具有递增型特征,其峰期温度压力指示的地热梯度为18～20℃/km,为典型的中压相系;此外,三个样品的P-T轨迹均显示早期升温升压直至峰期阶段,随后降温降压的顺时针型,反映地壳加厚和后期抬升的演化过程。云母片岩中的锆石发育典型的变质边结构,变质边的Th/U=0.004～0.02,锆石U-Pb年代学结果显示该变质年龄为398±6 Ma,代表峰期或近峰期阶...     

北京天文台的WET三通道高速光度计

对北京天文台新近改造成的三通道高速光度计的结构和性能进行介绍,并给出了在兴隆站85公分望远镜的一些实测结果.     

渤海湾西岸全新世海面变化

在讨论海面标志点基本定义的基础上,从渤海湾西岸534个原始数据中获得了136个指示高水位、潮间带或低水位的海面变化标志点,并重建了它们的相对海平面时空分布,进而获得了渤海湾西岸全新世相对海平面变化带.约10cal.ka B.P. 时,相对海平面变化带达到-25m,以约6m/1000a(即约6mm/a)的平均速率上升,在6cal.ka B.P. 前后达到现代海面的高度; 6cal.ka B.P. 至今,变化带的高度介于+1m~-2m之间,未发现中全新世相对高海面.再搬运海相贝类和陆相泥炭类样品的 14C 年龄,分别存在约600年和660年的驻留时间.经过驻留时间校正的新海面变化年代学序列,将渤海湾相对海平面达到现代高度的时间点确定为约6cal.ka B.P.,从而与全球海面变化的对比更为准确.渤海湾盆地的长期稳定下沉和沉积自重压实的共同作用,可能抵消了冰川均衡调整(GIA)引起的中全新世数米高的相对高海面.     

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.