Correct treatment of rotation of sliding surfaces in a kinematic model of the triple friction pendulum bearing

This paper addresses the treatment of the rotation of the internal components of the triple friction pendulum (TFP) isolation bearing in a numerical model previously presented by the authors. The numerical model is based on the kinematic behavior of the individual sliding surfaces and the constitutive relationships between them. The modification suggested in this paper improves the performance of the model so that the results exactly match that of the one‐dimensional piecewise linear behavior previously derived for the TFP bearing for restricted properties. The improved numerical model simulates bidirectional shear response and places no a priori restrictions on the bearing properties. The modification is put in the form of a technical communication so that the notation used and the basis of the correction could be presented with adequate clarity and so that an example of the benefit of the correction could be presented. Copyright © 2012 John Wiley & Sons, Ltd.     

Approximating peak responses in seismically isolated buildings using generalized modal analysis

Although the ability to simulate accurately the detailed behavior of nonlinear isolation bearings and the effects of this nonlinearity on dynamic response of the isolated building is desirable, such detailed analyses are not feasible during initial design stages when bearing properties are being selected. However, it would be very beneficial to be able to estimate accurately key engineering demand parameters at the early stages of design to understand the dynamic response characteristics of the isolated structure and to balance and optimize the bearing and structural characteristics to achieve the performance goals set for the building. Unfortunately, classical modal response spectrum analysis methods do not provide accurate results for problems with large, nonclassical damping, as is characteristic of isolated buildings. To find a method capable of predicting peak building responses even with large nonclassical damping, generalized modal response spectrum analysis is implemented. The responses of several buildings having different heights and isolated by linear viscous as well as triple friction pendulum and single friction pendulum isolation systems are investigated. Generalized modal response spectrum analysis methods were found to give significantly better predictions for all systems compared with classical methods. The behavior of buildings isolated with single friction pendulum systems exhibiting sudden changes in stiffness could not be well predicted by either general or classical modal response spectrum analysis when effective damping was increased. Copyright © 2013 John Wiley & Sons, Ltd.     

Climate extreme and its linkage to regional drought over Idaho, USA

To investigate consequences of climate extreme and variability on agriculture and regional water resource, twenty-seven climatic indices of temperature and precipitation over Idaho, USA, were computed. Precipitation, mean temperature and maximum temperature, self-calibrated Palmer Drought Index and Standardized Precipitation Index for 1-, 3-, 6- and 12-month time scales were used to identify spatial and temporal distribution of climatic extreme and variability as well as drought frequency and magnitude. Seven oceanic indices were also used to detect teleconnections between climatic indices and regional droughts. The analyses were conducted for 56 meteorological stations, during 1962?C2008, characterized by a long-term and high-quality data set. The result indicates that decreasing trends and increasing trends are identified for precipitation and temperature, respectively. Consequently, it appears that frost and ice days dwindle as growing season (May?CAugust) length, tropical nights and summer days increase. Given current climate conditions, the results also imply that these trends will continue in the future possibly driven by uncertain climate variability. We anticipate that these indices explained by teleconnections will improve drought-forecasting capability in this region.     

Hybrid-optimization algorithm for the management of a conjunctive-use project and well field design

Hi-Desert Water District (HDWD), the primary water-management agency in the Warren Groundwater Basin, California, plans to construct a waste water treatment plant to reduce future septic-tank effluent from reaching the groundwater system. The treated waste water will be reclaimed by recharging the groundwater basin via recharge ponds as part of a larger conjunctive-use strategy. HDWD wishes to identify the least-cost conjunctive-use strategies for managing imported surface water, reclaimed water, and local groundwater. As formulated, the mixed-integer nonlinear programming (MINLP) groundwater-management problem seeks to minimize water-delivery costs subject to constraints including potential locations of the new pumping wells, California State regulations, groundwater-level constraints, water-supply demand, available imported water, and pump/recharge capacities. In this study, a hybrid-optimization algorithm, which couples a genetic algorithm and successive-linear programming, is developed to solve the MINLP problem. The algorithm was tested by comparing results to the enumerative solution for a simplified version of the HDWD groundwater-management problem. The results indicate that the hybrid-optimization algorithm can identify the global optimum. The hybrid-optimization algorithm is then applied to solve a complex groundwater-management problem. Sensitivity analyses were also performed to assess the impact of varying the new recharge pond orientation, varying the mixing ratio of reclaimed water and pumped water, and varying the amount of imported water available. The developed conjunctive management model can provide HDWD water managers with information that will improve their ability to manage their surface water, reclaimed water, and groundwater resources.     

Experimental and analytical study of the bi‐directional behavior of the triple friction pendulum isolator

This paper presents a non‐linear, kinematic model for triple friction pendulum isolation bearings. The model, which incorporates coupled plasticity and circular restraining surfaces for all sliding surfaces, is capable of capturing bi‐directional behavior and is able to explicitly track the movement of each internal component. The model is general so that no conditions regarding bearing properties, which effect the sequence of sliding stages, are required for the validity of the model. Controlled‐displacement and seismic‐input experiments were conducted using the shake table at the University of California, Berkeley to assess the fidelity of the proposed model under bi‐directional motion. Comparison of the experimental data with the corresponding results of the kinematic model shows good agreement. Additionally, experiments showed that the performance of TFP bearings is reliable over many motions, and the behavior is repeatable even when initial slider offsets are present. Copyright © 2011 John Wiley & Sons, Ltd.     

LQR control with frequency‐dependent scheduled gain for a semi‐active floor isolation system

Floor isolation is an alternative to base isolation for protecting a specific group of equipment installed on a single floor or room in a fixed‐base structure. The acceleration of the isolated floor should be mitigated to protect the equipment, and the displacement needs to be suppressed, especially under long‐period motions, to save more space for the floor to place equipment. To design floor isolation systems that reduce acceleration and displacement for both short‐period and long‐period motions, semi‐active control with a newly proposed method using the linear quadratic regulator (LQR) control with frequency‐dependent scheduled gain (LQRSG) is adopted. The LQRSG method is developed to account for the frequency characteristics of the input motion. It updates the control gain calculated by the LQR control based on the relationship between the control gain and dominant frequency of the input motion. The dominant frequency is detected in real time using a window method. To verify the effectiveness of the LQRSG method, a series of shake table tests is performed for a semi‐active floor isolation system with rolling pendulum isolators and a magnetic‐rheological damper. The test results show that the LQRSG method is significantly more effective than the LQR control over a range of short‐period and long‐period motions. Copyright © 2013 John Wiley & Sons, Ltd.     

Arsenic Management Through Well Modification and Simulation

Arsenic concentrations can be managed with a relatively simple strategy of grouting instead of completely destroying a selected interval of well. The strategy of selective grouting was investigated in Antelope Valley, California, where groundwater supplies most of the water demand. Naturally occurring arsenic typically exceeds concentrations of 10 µg/L in the water produced from these long-screened wells. The vertical distributions of arsenic concentrations in intervals of the aquifer contributing water to selected supply wells were characterized with depth-dependent water-quality sampling and flow logs. Arsenic primarily entered the lower half of the wells where lacustrine clay deposits and a deeper aquifer occurred. Five wells were modified by grouting from below the top of the lacustrine clay deposits to the bottom of the well, which reduced produced arsenic concentrations to less than 2 µg/L in four of the five wells. Long-term viability of well modification and reduction of specific capacity was assessed for well 4-54 with AnalyzeHOLE, which creates and uses axisymmetric, radial MODFLOW models. Two radial models were calibrated to observed borehole flows, drawdowns, and transmissivity by estimating hydraulic-conductivity values in the aquifer system and gravel packs of the original and modified wells. Lithology also constrained hydraulic-conductivity estimates as regularization observations. Well encrustations caused as much as 2 µg/L increase in simulated arsenic concentration by reducing the contribution of flow from the aquifer system above the lacustrine clay deposits. Simulated arsenic concentrations in the modified well remained less than 3 µg/L over a 20-year period.     

Lightning activity related to satellite and radar observations of a mesoscale convective system over Texas on 7–8 April 2002

A multi-sensor study of the leading-line, trailing-stratiform (LLTS) mesoscale convective system (MCS) that developed over Texas in the afternoon of 7 April 2002 is presented. The analysis relies mainly on operationally available data sources such as GOES East satellite imagery, WSR-88D radar data and NLDN cloud-to-ground flash data. In addition, total lightning information in three dimensions from the LDAR II network in the Dallas–Ft. Worth region is used.GOES East satellite imagery revealed several ring-like cloud top structures with a diameter of about 100 km during MCS formation. The Throckmorton tornadic supercell, which had formed just ahead of the developing linear MCS, was characterized by a high CG+ percentage below a V-shaped cloud top overshoot north of the tornado swath. There were indications of the presence of a tilted electrical dipole in this storm. Also this supercell had low average CG− first stroke currents and flash multiplicities. Interestingly, especially the average CG+ flash multiplicity in the Throckmorton storm showed oscillations with an estimated period of about 15 min.Later on, in the mature LLTS MCS, the radar versus lightning activity comparison revealed two dominant discharge regions at the back of the convective leading edge and a gentle descent of the upper intracloud lightning region into the trailing stratiform region, apparently coupled to hydrometeor sedimentation. There was evidence for an inverted dipole in the stratiform region of the LLTS MCS, and CG+ flashes from the stratiform region had high first return stroke peak currents.     

Analysis of dust events in 2008 and 2009 using the lidar network, surface observations and the CFORS model

The Asian dust events in 2008 (May 24–June 4 in 2008) and in 2009 (March 12–25, October 13–26, and December 15–28 in 2009) were analyzed with the lidar network observations, surface observations in China, Korea, Japan, and Mongolia, and with the chemical transport model CFORS. Transport of Asian dust and mixing of dust with air pollution aerosols were studied. The event of May 24 to June 4 in 2008 was a significant event unusually late in the spring dust season. The dust event of March 12–25, 2009 was an interesting example of elevated dust layer, and transport of dust from the elevated dust layer to the ground by the boundary layer activity was observed with the lidars and surface observations in Japan. The concentration of air pollution aerosols was relatively high during the dust event, and the results suggest that vertical structure as well as transport path is important for the mixing of dust and air pollution aerosols. The dust events in October and December 2009 were examples of dust events in autumn and winter. The online mode CFORS reproduced the observation data generally well, except for the event of May 24 to June 4 in 2008. The results of the fourdimensional variational assimilation of the lidar network data reproduced the dust concentration in Korea and Japan reasonably in that event.