Effects of bottom bracings on torsional dynamic characteristics of horizontally curved twin I-girder bridges with different curvatures

Curved twin I-girder bridges (CTIGBs) have low torsional stiffness that makes them vulnerable to dynamic loads.This study investigates the effects of bottom bracings on the torsional dynamic characteri...     

Numerical analysis on seismic response of Shinkansen bridge-train interaction system under moderate earthquakes

This study is intended to evaluate the influence of dynamic bridge-train interaction (BTI) on the seismic response of the Shinkansen system in Japan under moderate earthquakes. An analytical approach to simulate the seismic response of the BTI system is developed. In this approach, the behavior of the bridge structure is assumed to be within the elastic range under moderate ground motions. A bullet train car model idealized as a sprung-mass system is established. The viaduct is modeled with 3D finite elements. The BTI analysis algorithm is verified by comparing the analytical and experimental results. The seismic analysis is validated through comparison with a general program. Then, the seismic responses of the BTI system are simulated and evaluated. Some useful conclusions are drawn, indicating the importance of a proper consideration of the dynamic BTI in seismic design.     

Uptake mechanism of anthropogenic CO<Subscript>2</Subscript> in the Kuroshio Extension region in an ocean general circulation model

The uptake mechanism of anthropogenic CO₂ in the Kuroshio Extension is examined by a Lagrangian approach using a biogeochemical model embedded in an ocean general circulation model. It is found that the uptake of anthropogenic CO₂ is caused mainly by the increase of pCO₂ dependency of seawater on temperature, which is caused by greater dissolved inorganic carbon concentration in the modern state than in the pre-industrial state. In contrast with the view of previous studies, the effect of the vertical entrainment, which brings waters that last contacted the atmosphere with the past lower CO₂ concentration, is comparatively small. Winter uptake of anthropogenic CO₂ increases with the rise of the atmospheric CO₂ level, while summer uptake is relatively stable, resulting in a larger seasonal cycle of the uptake. This increase is significant, especially in the Kuroshio Extension region. It is newly suggested that this increase in the Kuroshio Extension region is largely caused by the combined effects of the increased pCO₂ dependency of the sea water on the temperature and the seasonal difference in cooling.     

Phytoplankton productivity in the western subarctic gyre of the North Pacific in early summer 2006

We deployed a profiling buoy system incorporating a fast repetition rate fluorometer in the western subarctic Pacific and carried out time-series observations of phytoplankton productivity from 9 June to 15 July 2006. The chlorophyll a (Chl a) biomass integrated over the euphotic layer was as high as 45–50 mg Chl a m⁻² in the middle of June and remained in the 30–40 mg Chl a m⁻² range during the rest of observation period; day-to-day variation in Chl a biomass was relatively small. The daily net primary productivity integrated over the euphotic layer ranged from 144 to 919 mg C m⁻² day⁻¹ and varied greatly, depending more on insolation rather than Chl a biomass. In addition, we found that part of primary production was exported to a 150-m depth within 2 days, indicating that the variations in primary productivity quickly influenced the organic carbon flux from the upper ocean. Our results suggest that the short-term variability in primary productivity is one of the key factors controlling the carbon cycle in the surface ocean in the western subarctic Pacific.     

Is there any seasonal variation in marine nematodes within the sediments of the intertidal zone?

The sediment parameters and nematode assemblages in the intertidal zone of the Hichirippu shallow lagoon, Hokkaido, Japan, were investigated. The objectives of this study were to observe the seasonal variation in the nematodes in the sediment, and to investigate the relationships between the nematodes and environmental factors. Samples were collected bi-monthly from five stations on the tidal flat from April 2003 to February 2004. It was found that the sediment parameters (Chl a concentration, AVS, TOC and TN contents) varied throughout the 10-month study. Fifty-four species of nematodes were found in the study area. The density and biomass of the nematodes varied in accordance with the sediment temperature during the sampling period. In this study, there was a seasonal variation in the nematode assemblage found in the intertidal zone of this shallow lagoon. The important factors affecting this variation were sediment temperature, and food competition among the nematodes themselves. The seasonal variation of the nematode also showed a relationship with the Chl a concentration in the sediment during the sampling period.     

Comparative analysis of contributing parameters for rainfall-triggered landslides in the Lesser Himalaya of Nepal

In the Himalaya, people live in widely spread settlements and suffer more from landslides than from any other type of natural disaster. The intense summer monsoons are the main factor in triggering landslides. However, the relations between landslides and slope hydrology have not been a focal topic in Himalayan landslide research. This paper deals with the contributing parameters for the rainfall-triggered landslides which occurred during an extreme monsoon rainfall event on 23 July 2002, in the south-western hills of Kathmandu valley, in the Lesser Himalaya, Nepal. Parameters such as bedrock geology, geomorphology, geotechnical properties of soil, and clay mineralogy are described in this paper. Landslide modeling was performed in SEEP/W and SLOPE/W to understand the relationship of pore water pressure variations in soil layers and to determine the spatial variation of landslide occurrence. Soil characteristics, low angle of internal friction of fines in soil, medium range of soil permeability, presence of clay minerals in soil, bedrock hydrogeology, and human intervention were found to be the main contributing parameters for slope failures in the region.     

The Backus–Gilbert approach to the 3-D structure in the upper mantle – II. SH and SV velocity

Summary. Phase velocity variations obtained in the previous paper are inverted by the Backus–Gilbert method for the velocity structure of the upper mantle. Spheroidal modes and toroidal modes in the period range of 125–260 s are used in the inversion. The data cannot constrain all six parameters in a transversely isotropic medium and we chose to perturb only two parameters, SH and SV velocities. SV velocities are resolved between the depths of about 200 and 400 km and SH velocities between 0 and 200 km. Resolution kernels have half-peak widths of about 200–300 km in depth, becoming broader for deeper target depths. SV velocity kernels show secondary peaks near the surface of the Earth, with widths varying from 50 to 100 km. The deeper the target depths, the wider the secondary peaks near the surface. SH velocity kernels do not possess such secondary peaks. The trade-off between SV and SH velocities is small. SV velocity is essentially determined by spheroidal modes and SH velocity by toroidal modes. Because of the broad width of the resolution kernels, the structure in the resolved region is difficult to detect from our data set; for example the differences in SV velocity structure between 250 and 350 km or the differences in SH velocity between 100 and 200 km are difficult to distinguish. Considering the horizontal resolution of about 2000 km, obtained in the previous paper, averaging kernels for 3-D structure are quite elongated in the horizontal dimension.     

Linear programming approach to moment tensor inversion of earthquake sources and some tests on the three-dimensional structure of the upper mantle

Summary. A new method of moment tensor inversion is developed, which combines surface wave data and P -wave first motion data in a linear programming approach. Once surface wave spectra and first motion data are given, the method automatically obtains the solution that satisfies first motion data and minimizes the L1 norm of the surface wave spectra. We show the results of eight events in which the method works and is stable even for shallow events. We also show one event in which surface wave data and P -wave first motion data seem to be incompatible. In such cases, our method does not converge or converges to a solution which has a large minor (second) double couple component. It is an advantage that the method can determine the compatibility of two data sets without trial and error.
Laterally heterogeneous phase velocity corrections are used to obtain spectra at the source. The method is also applied to invert moment tensors of eight events in two recent three-dimensional (3-D) upper mantle structures. In both 3-D models, variances of spectra are smaller than those in a laterally homogeneous model at 256 s. Statistical tests show that those reductions are significant at a high confidence level for five events out of eight examined. For three events, we examined those reductions at shorter periods, 197 and 151 s. The reduction of variances is comparable to the results at 256 s and is again statistically significant at a high confidence level. Orientation of fault planes does not change very much by incorporation of lateral variations of phase velocity or by doing inversions at different periods. This is mainly because of the constraints from P -wave first motion data. Scatter of phase spectra at shorter periods, especially at 151 s, is great and suggests that surface wave ray paths deviate from great circle paths substantially and these effects cannot be ignored.