Aqueous and petroleum fluid flow associated with sand injectites

Field, petrographic and fluid inclusion characteristics of sand injectites from five outcrop localities and from the subsurface of the Tertiary of the south Viking Graben are described. Although the case studies are from a wide variety of sedimentological, stratigraphic and tectonic settings, and hence their diagenetic evolutions differ significantly, it is possible and useful to assign diagenetic events to three distinct phases of fluid flow associated with sand injectites in sedimentary basins. Firstly, there is fluid flow associated with the injection of the fluid–sediment mix during shallow burial. Early diagenetic imprints in sand injectites reveal that basinal fluids, which may be released during movement along deeper‐seated faults, can be associated with this process and thus the injection process may reveal information on the timing of basin‐scale movement of fluids. Secondly, following the injection process, basinal fluids continue to migrate through uncemented injectites and mix with the ambient meteoric and/or marine pore fluids that invade injectites from the overlying and surrounding host sediments. Early, often pervasive, carbonate cementation is common within sand injectites and rapidly turns sand injectites into flow barriers during shallow (<1 km) burial. If early carbonate cementation is not pervasive, fluid inclusions in late quartz cement (～>2 km of burial) reveal additional information on fluid flow associated with sand injectites during deeper burial. The latest phase of fluid flow occurs when sand injectites are reactivated as preferential fluid conduits during phases of deformation, when well‐cemented subvertical sand injectites become sites of focussed brittle deformation (fracturing). This study shows that sand injectites are a common and volumetrically important type of structural heterogeneity in sedimentary basins and that long‐lived fluid flow associated with sand injectites in very different settings can be assessed and compared systematically using a combination of petrography and fluid inclusion studies.     

Fluidization and injection in the deep-water sandstones of the Eocene Alba Formation (UK North Sea)

The Nauchlan Member of the Late Eocene Alba Formation (UK North Sea) consists of a deep‐water channel fill that was extensively modified by post‐depositional sand remobilization and injection. Sandstone textures, facies associations and the geometry of the channel fill were affected. A suite of sand‐rich facies was produced by large‐scale fluidization and injection within the channel fill and above it. These facies, termed here unstratified facies, are characterized by the absence of stratification surfaces and by discordant relationships with bedding in the adjacent succession. They reflect variable degrees of disruption of the primary sedimentary structures caused by escaping pore fluid, the velocity of which is estimated at least in the order of 0·1 ms^?1. Adjacent mudstones were severely disrupted by hydraulic fracturing, and fragments of fractured mudstone were incorporated into the fluidized sand. Average porosity was decreased in the sandstones affected by fluidization. Two main phases of sand injection are inferred to occur at different burial depths. A shallow burial phase (below 100 m) produced thin dykes with ptygmatic folds. The second phase occurred at the boundary between Eocene and Oligocene (≈ 300 m burial depth) and resulted in large‐scale tabular wing‐like dykes that project from the edges of the channel fill. The significant pore‐fluid overpressure, which was required to hydraulically fracture the thick mudstone seal and to fluidize the large volume of sand, was likely to be built up by static liquefaction of the source sand and was possibly enhanced by hydrocarbon gas influx.     

Precipitation in the Venezuelan Andes in the context of regional climate

Summary Rainfall regimes are primarily unimodal in central and eastern Venezuela but bimodal (peaks in May–June and September-October-November with a minimum in July–August) in the northwest. There is a sharp transition across the Andes suggesting a topographic-circulation connection. However, a mid-summer minimum also occurs at other locations in Venezuela and Central America during individual years. This paper addresses the nature and control of the regimes including the role of large-scale circulation features and convection as indicated by outgoing longwave radiation data. Altitudinal characteristics of precipitation in the Andes and their spatial variability are also investigated. The development of the minimum within the rainy season annual cycle is shown to be related to the combined effects of the evolution of sea surface temperatures in the east Pacific warm pool and reinforced in the area of the Andes by enhanced easterlies during July and August.Abbreviations used in text ENSO El Nino-Southern Oscillation - EPWP East Pacific Warm Pool - ITCZ Inter-tropical Convergence Zone - MEI Multivariate ENSO Index - MSM Mid-Summer Minimum - NCEP National Centers for Environmental Prediction - OLR Outgoing Longwave Radiation - SOI Southern Oscillation Index - SST Sea Surface Temperature With 13 Figures     

Automated Digital Photogrammetry: A Valuable Tool for Small‐scale Geomorphological Research for the Non‐photogrammetrist?

Digital photogrammetry provides a tool with which to automatically generate digital elevation models (DEMs). The necessary equipment is now both readily available and affordable: thus there is considerable potential for this technique to be widely adopted in geomorphological studies. But is it possible for geomorphologists without a background in photogrammety to use it successfully? As part of a larger study into rill initiation by overland flow, a non‐metric digital camera and ERDAS IMAGINE OrthoMAX software were used to generate small‐scale DEMs of soil surface microtopography. This paper reports on the procedure used, highlights potential pitfalls, and comments on the quality of the resultant DEMs. Whilst acquisition of high‐quality images using a digital camera is relatively straightforward, problems were subsequently encountered due to the small size of the internal imager and the need for camera calibration. Potential stumbling blocks in the use of the software lay in the setting‐up of ground control points and the use of tie‐points and check‐points, as well as several software glitches not identified in the current manual. Nonetheless, once these problems were overcome the technique proved to be a simple, effective and fast tool for generating high quality microtopographical DEMs. This methodology shows great promise for future geomorphological studies that require these kinds of surface data.     

Global Change and Health — The Good, The Bad and The Evidence

Debates over the merits and demerits of globalisation for health are increasingly polarised. Conclusions range from globalisation being essentially positive for health, albeit with a need to smooth out some rough edges, to one of utter condemnation, with adverse effects on the majority of the world's population. Anyone wading into this debate is immediately confronted by seemingly irreconcilable differences in ideology, opinion and interests. Both camps agree that global changes are occurring, and with them many of the determinants of population health status. While some skepticism persists about whether “globalisation” has value beyond being a fashionable buzzword, most agree that we need better understanding of these changes. Two difficult questions arise: (i) What are the health impacts of these changes; and (ii) how can we respond more effectively to them? To move beyond the stand-offs that have already formed within the health community, this paper reviews the main empirical evidence that currently exists, summarises key points of debate that remain, and suggests some ways forward for the research and policy communities. In particular, there is need for an informed and inclusive debate about the positive and negative health consequences of globalisation.     

Sinking cities

When water supplies are abstracted from alluvial sands, interbedded clays compact and cause ground subsidence. Entire cities are being gently lowered, with serious consequences for those on low coastal sites.     

Hydrothermal Alteration and Cu-Au Mineralization at Nena High Sulfidation-type Deposit, Frieda River, Papua New Guinea

Abstract. The Nena Cu‐Au deposit, located in the Frieda River mineral district of northwestern mainland Papua New Guinea, is a composite structurally‐lithologically controlled high sulfidation (HS) system. Its hydrothermal alteration and Cu‐Au mineralization are presented in this paper. Initially propylitized andesitic volcanics veined by epithermal quartz were pervasively superimposed by zoned HS alteration. The zonation grades from vuggy silica core to sulfur‐rich, pyritic silica‐alunite halo followed by pyrophyllite‐dickite‐kaolinite interval and finally to thin illite‐smectite margin, suggesting progressive decrease in temperature and increase in pH. This zonation is enveloped by chlorite‐epidote‐calcite‐gypsum alteration. The acid altered rocks were then invaded by multiple phases of pyrite, subsequently crosscut by quartz, vein alunite and barite. Then sequential deposition of bladed covellite, enargite, luzonite and stibioluzonite occurred from the NW to the SE portions of the deposit, forming a zonation suggestive of progressive decrease in temperature, sulfur fugacity and sulfidation stage. Most ore mineralization occurs in the vuggy silica core. Gold mineralization commenced from the transition of enargite to luzonite and continued throughout the stibioluzonite stage. Associated with gold deposition are Au‐rich pyrite, tennantite‐tetrahedrite, chalcopyrite‐bornite, native tellurium, electrum, calaverite, bismuthinite and galena. Native sulfur occupied the remaining cavities and represents the waning stage of the hydrothermal system. Fluid inclusions studies distinguished magmatic (>300–350d?C, 9–15 wt% NaCl equiv.) and meteoric (<150–200d?C, 1–2 wt% NaCl equiv.) fluids (Holzberger et al., 1996). Temperatures and salinities of fluid inclusions from barite associated with Cu sulfides show a general decrease from NW (330d?C, 9–15 wt% NaCl equiv.) to SE (172d?C, 10 wt% NaCl equiv.) parts of the deposit, indicating gradual entrainment of ground water (Hitchman and Espi, 1997). Interaction of magmatic fluids with meteoric water accompanied by changes in temperature, salinity, acidity and oxidation state of the resultant fluids is interpreted to have been the main cause of metal precipitation. Finally, supergene processes generated Au zone with an underlying chalcocite‐covellite‐digenite blanket over the primary sulfides at depth. Gold occurs as lattice constituent in scorodite, limonite‐goethite and jarosite. Chalcocite is more abundant and widespread than other Cu sulfides. Acidic fluids deposited powdery alunite and kaolinite, vein alunite and amorphous silica. Weakly secondary biotite‐quartz altered porphyry located below the known HS Cu‐Au deposit contains chalcopyrite‐bornite and is overprinted by quartz‐alunite‐pyro‐phyllite‐pyrite assemblage. This feature indicates close temporal, spatial and genetic relation between the two deposit types.     

IGS Near Real-Time Products and Their Applications

The primary IGS products, including precise GPS orbits, Earth orientation parameters, and estimated and predicted GPS satellite clocks, are no longer used exclusively for essential geodetic support of scientic research. They are increasingly being used by a wide range of non-academic applications. In these applications, timeliness is extremely critical. To address the timeliness issue, the strengths and weaknesses of current IGS production processes are discussed, new ways to improve the timeliness and quality are explored, and recommendations are proposed to fulfill the application requirements. ? 2001 John Wiley & Sons, Inc.     

GPS-assisted GLONASS orbit determination

 Using 1 week of data from a network of GPS/GLONASS dual-tracking receivers, 15-cm accurate GLONASS orbit determination is demonstrated with an approach that combines GPS and GLONASS data. GPS data are used to define the reference frame, synchronize receiver clocks and determine troposphere delay for the GLONASS tracking network. GLONASS tracking data are then processed separately, with the GPS-defined parameters held fixed, to determine the GLONASS orbit. The quality of the GLONASS orbit determination is currently limited by the size and distribution of the tracking network, and by the unavailability of a sufficiently refined solar pressure model. Temporal variations in the differential clock bias of the dual-tracking receivers are found to have secondary impact on the orbit determination accuracy. Received: 5 January 2000 / Accepted: 15 February 2001     

Sr evolution in the West Greenland-Labrador craton: a model for early Rb depletion in the mantle

A model for Sr evolution in the West Greenland-Labrador region is proposed based on the available data for granitic gneisses ranging in age from 3.6 AE to 1.9 AE and for recent continental tholeiites from West Greenland. The evolution of initial Sr isotopic composition is consistent with a two-stage model for the mantle in this area with a constant Rb/Sr ratio of 0.014 ± 0.002 from ～ 4.45 AE through the present. The model suggests the mantle may have been depleted in Rb ～ 4.45 AE ago if the Earth was originally chondritic with respect to Rb and Sr. This age of differentiation is consistent with recently proposed terrestrial differentiation based on Pb Pb analyses of ancient Amîtsoq gneiss feldspars (～4.47 AE, Gancarz and Wasserburg, 1977). A linear regression of the gneisses, if extrapolated to the present, predicts the present value of Sr⁸⁷/Sr⁸⁶ of the mantle in this area to be 0.7034 ± 0.0003 which is the measured Sr isotopic composition of the recent Svartenhuk tholeiites. Various implications of the model with respect to early Earth history, mantle evolution and pre-emplacement histories of gneissic suites are discussed.