Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

基于DXF的OpenFlight数据创建方法研究

针对虚拟城市仿真系统应用中OpenFlight模型缺乏、建模方式单一,难以构建复杂模型的情况,本文提出基于CAD文件来构建Opeflght模型的方法,在详细分析OpenFlight和DXF的数据组织结构的基础上,设计了基于DXF的OpenFlight数据创建方案并编程实现。通过实例测试证明该方案能快速、完整地进行数据转换,为虚拟城市系统的三维仿真模型构建提供了一条行之有效的途径。     

砂芯的第四纪环境遗迹研究值得重视——第四纪孢粉环境信息对全球环境研究的倡议

1996年春,天津地质调查中心海岸带与第四纪地质研究所参加了新疆地矿局在塔克拉玛干沙漠的地下水勘查工作,负责沙漠中心区KT1孔(塔中南侧38km处,38°47′N,83°57′E,孔深653.8m)的野外岩芯编录、取样和综合研究。KT1孔基本上是砂层与泥质沉积的互层,大致划分为212层、106个互层、53个中     

SOMATOM AR.C型CT机复位故障检修

本文介绍了由电源故障引起的不可逆转故障,并讨论了维修和故障的排除。     

Relationship of Uncertainty and Line Segment for Between Polygon Segment Spatial Data in GIS

The mathematic theory for uncertainty model of line segment are summed up to achieve a general conception, and the line error hand model of εσ is a basic uncertainty model that can depict the line accuracy and quality efficiently while the model of εm and error entropy can be regarded as the supplement of it. The error band model will reflect and describe the influence of line uncertainty on polygon uncertainty. Therefore, the statistical characteristic of the line error is studied deeply by analyzing the probability that the line error falls into a certain range. Moreover, the theory accordance is achieved in the selecting the error buffer for line feature and the error indicator. The relationship of the accuracy of area for a polygon with the error loop for a polygon boundary is deduced and computed.     

造山作用概念和分类

本文从造山作用的特征标志出发讨论了Sengor造山带定义的缺陷， 总结了造山作用的六条特征标志，并给出了造山作用新的定义。该定义包括了造山作用的起因、特征标志和大地构造背景。评述了造山带陆内、陆缘、陆间三分法方案的不足之处和剪压造山带的单独设类问题，提出了造山带板内、俯冲、碰撞三分方案。针对碰撞造山带，笔者在总结探讨现有分类方案的优点的基础上， 提出碰撞造山带陆陆碰撞、碰撞增生、弧陆碰撞和无大陆型碰撞造山带四分法方案，其中无大陆型碰撞造山带是描述陆壳物质形成初期计体拼合聚合过程的新类型。     

Tests on low‐ductility RC frames under high‐ and low‐frequency excitations

The response of low‐ductility reinforced concrete (RC) frames, designed typically for a non‐seismic region, subjected to two frequencies of base excitations is studied. Five half‐scaled, two‐bay, two‐storey, RC frames, each approximately 5 m wide by 3.3 m high, were subjected to both horizontal and/or vertical base excitations with a frequency of 40 Hz as well as a lower frequency of about 4 Hz (close to the fundamental frequency) using a shake table. The imposed acceleration amplitude ranged from 0.2 to 1.2g. The test results showed that the response characteristics of the structures differed under high‐ and low‐frequency excitations. The frames were able to sustain high‐frequency excitations without damage but were inadequate for low‐frequency excitations, even though the frames exhibited some ductility. Linear‐elastic time‐history analysis can predict reasonably well the structural response under high‐frequency excitations. As the frames were not designed for seismic loads, the reinforcement detailing may not have been adequate, based on the crack pattern observed. The effect of vertical excitation can cause significant additional forces in the columns and moment reversals in the beams. The ‘strong‐column, weak‐beam’ approach for lateral load RC frame design is supported by experimental observations. Copyright © 2001 John Wiley & Sons, Ltd.